UHF haircard ZJ205-2DBI
Model: ZJ205-2DBI
At the large electronics production workshop, UHF readers go through the entire production process. The UHF readers quickly read and write on the line to match the production mission. On the production line, UHF readers monitor real-time data on the operation of the equipment to ensure quality. Before the finished product is stored, the UHF readers scan the product labels again, complete the recording and inventory registration of the information, and ensure that the production is carried out in an orderly manner.
Product Overview
◆ (a) The UHF transceiver ZJ205-2DBI products meet the technical standards of EPC CLASS 1 GEN 2 and ISO 18000-6C;
• A reading-writing distance of 0.3 to 0.5 m, quick read-and-write cards (regulating the reading distance as required);
• Launch power can be set through communication interfaces, and read-and-written distance can be adjusted to complex on-site requirements;
• Enables the configuration parameters to be adjusted and, in due course, the data of the flyer label read and write;
• The card-issuer design has a trigger input that allows for the identification of labels in case of an external trigger event, meeting green environmental requirements and reducing energy consumption;
◆ The reader design has an external non-failable storage space, and in closed application systems, the system's published label ID can be stored in a repository in advance, compared with the host's stored ID when the reader recognizes it to the tag ID, and executes a predefined reading writer or user-designed action based on the results of the comparison;
• The use of high standard metrware, thermostats to ensure the consistency of parameters;
• Special application to parking and production water line management applications, personnel management etc.
• A reading-writing distance of 0.3 to 0.5 m, quick read-and-write cards (regulating the reading distance as required);
• Launch power can be set through communication interfaces, and read-and-written distance can be adjusted to complex on-site requirements;
• Enables the configuration parameters to be adjusted and, in due course, the data of the flyer label read and write;
• The card-issuer design has a trigger input that allows for the identification of labels in case of an external trigger event, meeting green environmental requirements and reducing energy consumption;
◆ The reader design has an external non-failable storage space, and in closed application systems, the system's published label ID can be stored in a repository in advance, compared with the host's stored ID when the reader recognizes it to the tag ID, and executes a predefined reading writer or user-designed action based on the results of the comparison;
• The use of high standard metrware, thermostats to ensure the consistency of parameters;
• Special application to parking and production water line management applications, personnel management etc.
Specifications
• Specification size: 122*98*27mm
• Product weight: 0.50 kg
• Protective standard: IP-53
• Working environment: temperature -30°C ~70°C, humidity 5% ~90% no condensation
• Storage environment: temperature - 40°C ~ 80°C
• Working frequency: 40-960 MHz (regulated), jump frequency (FHSS) or specified frequency launch mode
• Launch power: 17 dBm
• Communications interface: USP interface output
• Trigger interface: 1 input port
• Wireless interface: EPCCLASS 1 GEN 2 standard
◆ Read-write mode: single card (label) mode, speed of reading and writing < 0.1 seconds
Label rate: 100 km/h
• Maximum distance from the read card: 0.5 m (read with 2DB ceramic antennas, single label AZ9662)
• Recommended read-card distance: 0.3 m (single label AZ9662 read, stability criterion based on distance)
• Directional reading card area: An antenna orientation map with reference configuration
• Configure antenna: incorporated 2dBi circle polarization gain antenna (840-960 MHz)
• Product weight: 0.50 kg
• Protective standard: IP-53
• Working environment: temperature -30°C ~70°C, humidity 5% ~90% no condensation
• Storage environment: temperature - 40°C ~ 80°C
• Working frequency: 40-960 MHz (regulated), jump frequency (FHSS) or specified frequency launch mode
• Launch power: 17 dBm
• Communications interface: USP interface output
• Trigger interface: 1 input port
• Wireless interface: EPCCLASS 1 GEN 2 standard
◆ Read-write mode: single card (label) mode, speed of reading and writing < 0.1 seconds
Label rate: 100 km/h
• Maximum distance from the read card: 0.5 m (read with 2DB ceramic antennas, single label AZ9662)
• Recommended read-card distance: 0.3 m (single label AZ9662 read, stability criterion based on distance)
• Directional reading card area: An antenna orientation map with reference configuration
• Configure antenna: incorporated 2dBi circle polarization gain antenna (840-960 MHz)
• There may be differences in the parameters and functions of this card reader between home or area standards and under different circumstances, without further notice
Additional Specifications
| Power voltage | 12V |
|---|---|
| Operating Frequency | 840-960MHz |
| Operating Temperature | -30~+70℃ |
| Storage temperature | -40~+80℃ |
| Read/Write Range | 0.3-0.5m |
| Specifications | 122*98*27mm |
| Applications | Garage and production water line management applications, personnel... |
Product Presentation
Product Photos

Ms. Lei
Mr. Pang