RFID Reader
Model: ZJ60-SERIES
Product characteristics and advantages
• Work frequency 860-928 MHz (may be adjusted to the requirements of different countries or regions);
• Working by wide-spectral jump frequency (FHSS) or by an specified frequency launch; output power up to 30 dBm (modifiable);
• A 12-db/i-round polarized antenna, typically read at a distance of 20 metres;
• Support for a variety of working models, such as automatic and interactive response;
• Low-utility design, single + 9V power supply;
• Supports multiple user interfaces, including RS232, RS485, and Wegen.
• Effective distance is associated with electronic labelling and the working environment, which applies to a variety of wireless frequency recognition (RFID) systems such as logistics, door-ban systems, anti-false systems and production process control.
Power characteristics
Limit parameters
• Power voltage (VCC): 16V
· Working temperature (TOPR): -10 + 55°C
• Storage temperature (TSTR): 20 ~ 75°C
Specifications (except for special instructions, the specified specifications are taken from TA = 25°C and VCC = + 9V working conditions)
· Power voltage (VCC): 8-12(9 typical) V
• Work current (IC): 450-1500mA
• Frequency of work (FREQ): 902-928 MHz
Interface
◆ Red: +9V
◆ Black: GND
• Yellow: Wegen DATA0
• Blue: Wegen DATA1
◆ Purple: RS485 R+
◆ Orange: RS485 R-
◆ Brown: GND
• White: RS232 RXD
• Green: RS232 TXD
• Grey: reservation
Note: For the RRRU1881TCP model for which TCPIP network interfaces are configured, an STD RJ45 web plugin is attached.
Product Photos

Product characteristics and advantages
• Corporate autonomous intellectual property design, which fully supports the EPA C1G2 (ISO18000-6C) agreement;
• Work frequency 840-960 MHz (which can be adjusted to the requirements of different countries or regions);
• Working in broad-spectral jump frequency (FHSS) or ad hoc frequency launch, with a high power output software that can be adjusted at a step interval of 1 db, ...30dbm;
• Multiple antenna configuration options, typical read distance of 8-35 m, for example, 5dbi, 9dbi, 12dbi;
• Peak label query speed > 700/s, 1,000 tags in the label cache @96bit EPC, MMCX antenna interface;
• Low-utility design, wide-work voltage, single+3.7V~5V power supply;
• Support for RS232 serial communication interface (3.3 V TTL level), high stability, external dispersive air cooling and spreading heat;
◆ Supports development in C#, C++, and Delphi and can read UHF passive temperature-sensing tags (ZJ-301T module).
• There may be differences in the parameters and functions of this reading and writing module in different national or regional standards and environments;
◆ Application to industrial production management 4.0: Museums, Clothing Management, Tobacco Logistics, Food Medicines Management, Book Management, License Protection and Fraud Identification Management, Vehicle Group Movement Management, Smart Garage Management, Port-entry and Entry Vehicle Inspection Control, Warehouse Material Access Control and Identification Management, Baggage Identification Management, Branding Commodity Counterfeiting and Terminal Container Management, various applications of wireless frequency identification (RFID) systems.
Power characteristics
Limit parameters
Power voltage (VCC): 5.5 V
• Working temperature (TOPR): 20 ~ 65°C
• Storage temperature (TSTR): 30 + 75 °C
◆ Work humidity (Rh): +5% ~ +90% No condensation (Cooled)
Specifications
· Power voltage (VCC): 3.7-5.25 (5 typical) V
• Work current (IC): 1500 mA
• Frequency of work (FREQ): 860-960 MHz
Radiofrequency output power (PRF): 0-33dBm
◆ Radio-frequency output power accuracy (APRF): +/-1dB
◆ Radio-frequency output power flat (FRPF): +/-0.2 dB
• Receiving sensitivity (SR): -85dBm
Wire interface
◆ Red: power
• Black: CND
◆ White: 232 TXD
◆ Purple: 232 RXD
◆ Brown: GND
◆ Yellow: Hutgen DATA0
• Deep green: Wegen DATA1
• Grey: CND
◆ Pink: 485 A+
◆ Orange: 485 B-
Light green: trigger T+
◆ Blue: Trigger T-
Note: For the configuration of the TCPIP network interface, a standard RJ45 web plugin is attached; relays, bluetooth, WiFi are custom-made.
Other parameters
• Specification size: 260*260*95mm
• Product weight: 2.00kg
• Reading/writing distance: 15-25 m
• Protection standard: IP-65
◆ Power supply: DC12V, 25W adapter (conversion from AC220, 50Hz)
• Trigger interface: 1 input port
◆ Reading and writing mode: Doca (label) mode, speed of reading and writing < 0.1 seconds
Label rate: 100 km/h
• Directional reading card area: An antenna orientation map with reference configuration
Communications interface 1: RS232, RS485
◆ Communication interface 2: relay and RJ45 Ethernet output (optional TCP/IP; Wi-Fi and other options available on request)
◆ Work power: DC12V/2A adapter (AC220, 50Hz conversion)
Product Photos

Product characteristics and advantages
• Corporate autonomous intellectual property design, which fully supports the EPA C1G2 (ISO18000-6C) agreement;
• Work frequency 840-960 MHz (which can be adjusted to the requirements of different countries or regions);
• Working in broad-spectral jump frequency (FHSS) or ad hoc frequency launch, with a high power output software that can be adjusted at a step interval of 1 db, ...30dbm;
• Multiple antenna configuration options, typical read distance of 8-35 m, for example, 5dbi, 9dbi, 12dbi;
• Peak label query speed > 700/s, 1,000 tags in the label cache @96bit EPC, MMCX antenna interface;
• Low-utility design, wide-work voltage, single +3.7 V~5V power;
• Support for RS232 serial communication interface (3.3 V TTL level), high stability, external dispersive air cooling and spreading heat;
◆ Supports development in C#, C++, and Delphi and reads passive UHF temperature tags (ZJ-301T module).
• There may be differences in the parameters and functions of this reading and writing module in different national or regional standards and environments;
◆ RFID applications include Industry 4.0 production management, museums, apparel management, tobacco logistics, food and pharmaceutical management, library management, license plate authentication, vehicle group dispatch, smart parking, vehicle inspections at border crossings, tracking and identification of goods entering and leaving warehouses, baggage and parcel identification, branded goods authentication, and container management at terminals.
Power characteristics
Limit parameters
Power voltage (VCC): 5.5 V
• Working temperature (TOPR): 20 ~ 65°C
• Storage temperature (TSTR): 30 + 75 °C
◆ Work humidity (Rh): +5% ~ +90% No condensation (Cooled)
Specifications
· Power voltage (VCC): 3.7-5.25 (5 typical) V
• Work current (IC): 1500 mA
• Frequency of work (FREQ): 860-960 MHz
Radiofrequency output power (PRF): 0-33dBm
◆ Radio-frequency output power accuracy (APRF): +/-1dB
◆ Radio-frequency output power flat (FRPF): +/-0.2 dB
• Receiving sensitivity (SR): -85dBm
Wire interface
◆ Red: power
• Black: CND
◆ White: 232 TXD
◆ Purple: 232 RXD
◆ Brown: GND
◆ Yellow: Hutgen DATA0
• Deep green: Wegen DATA1
• Grey: CND
◆ Pink: 485 A+
◆ Orange: 485 B-
Light green: trigger T+
◆ Blue: Trigger T-
Note: For the configuration of the TCPIP network interface, a standard RJ45 web plugin is attached; relays, bluetooth, WiFi are custom-made.
Other parameters
• Specification size: 130*130*55mm
• Product weight: 1.00 kg
• Reading and writing distance: 3-5 m
• Protection standard: IP-65
◆ Power supply: DC12V, 25W adapter (conversion from AC220, 50Hz)
• Trigger interface: 1 input port
◆ Reading and writing mode: Doca (label) mode, speed of reading and writing < 0.1 seconds
Label rate: 100 km/h
• Directional reading card area: An antenna orientation map with reference configuration
Communications interface 1: RS232, RS485
◆ Communication interface 2: relay and RJ45 Ethernet output (optional TCP/IP; Wi-Fi and other options available on request)
• Work power: DC12V/2A adapter (AC220, 50Hz conversion)
Product Photos

Product characteristics and advantages
◆ RFID card reader ZJ602-2DBI is a high-performance UHF reading and writing device;
• Auto-intellectual property design, combined with its own efficient signal processing algorithms, to achieve rapid reading and writing processing of electronic labels while maintaining a high literacy rate;
◆ Extensive application to industrial 4.0 production management, museums, clothing management, tobacco logistics, food and medicine management, book management, licence plate protection identification, vehicle group movement control, smart parking administration, port entry/exit vehicle inspection control, warehouse material access control and identification control, baggage package recognition management, branding commodity security and various areas of use for wireless frequency identification (RFID) systems such as terminal container management.
Power characteristics
Limit parameters
Power voltage (VCC): 5V
Working temperature (TOPR): 20~65°C
• Storage temperature (TSTR): -30~+75°C
◆ Work humidity (Rh): +5% ~ +90% No condensation (Cooled)
Specifications
◆ Power voltage (VCC): 4.5 ~ 5.5 (typical 5) V
• Work current (IC): 1.5A
• Frequency of work (FREQ): 902-928 MHz
Product Photos

Product characteristics and advantages
The RFID readers ZJ5021-8A are mainly applied to various wireless frequency recognition (RFID) systems such as logistics, door-to-door systems, anti-false systems and production process control.
Specifications
• Working frequency: 840-960 MHz
• Power voltage: 16V
• Output power: 33dBm (modifiable)
• Working temperature: 20~55°C
• Storage temperature: 20~85°C
• Work: low-capacity design, single + 9V power supply, optional PEE power supply
• Work currents: 0.5-1.2A
• Interface: multiple communication interfaces supporting RS232, USB (Slave), optional RJ45 (TCP/IP)
• Specification size: 268/240*181*28mm
• Support for 8 external TNC antenna interfaces and antenna detection
Specifications
• Specification size: 122*98*27mm
• Product weight: 0.50 kg
• Protective standard: IP-53
• Working environment: temperature -30°C ~70°C, humidity 5% ~90% no condensation
• Storage environment: temperature - 40°C ~ 80°C
• Working frequency: 40-960 MHz (regulated), jump frequency (FHSS) or specified frequency launch mode
◆ Launch power:...17dBm
• Communications interface: USP interface output
• Trigger interface: 1 input port
• Wireless interface: EPCCLASS 1 GEN 2 standard
◆ Read-write mode: single card (label) mode, speed of reading and writing < 0.1 seconds
Label rate: 100 km/h
• Maximum distance from the read card: 0.5 m (read with 2DB ceramic antennas, single label AZ9662)
• Recommended read-card distance: 0.3 m (single label AZ9662 read, stability criterion based on distance)
• Directional reading card area: An antenna orientation map with reference configuration
• Configure antenna: incorporated 2dBi circle polarization gain antenna (840-960 MHz)
Product parameters
• Model: ZJ403
◆ Type: UHF hyperhigh frequency readers
• Outer size: 86*86*22mm
◆ Weight: 200g
• Shell material: PVC spray
◆ Device colour: white + black
• Working temperature: 20~60°C
• Storage temperature: -30~70°C
• Work humidity: -25~85%
• Working frequency: 865 MHz - 928 MHz (support to China, United States, South Korea, Europe etc.)
Antenna Specification: 2 dbi-incorporated with rounded ceramic antennas
• Output power: 0 - 17dBm
• Reading card distance*: 0-50 cm (relevant to the card and card environment)
• Writing card distance*: 0-20 cm (relevant to the card and reading card environment)
◆ Card read speed: 100 reads per second
• Read-and-write card type: ISO18000-6C (EPC C1G2)
• Internal antenna: Yes
♪ Inside LED: Blue LED
◆ Inline horns: beepers
• Working voltage: USB interface for electricity, DC +5V
Work current: less than 200 mA (5V input) / 1W
• Communications interface: support USB 2.0 interface, USB undisable and USB unexposed keyboards RS232 (standard), RS485 (selection), USB (select)
• Development package: Provides a dynamic connection library (DLL) and demonstration software source code to support secondary development. Supports the development of languages such as C++, C#, Java, Delphi, VB, Linux, ARM, Python, NodeJS, Modbus
• Communications interface: RS232, RS485
Additional Specifications
| Power voltage | 16V |
|---|---|
| Operating Frequency | 860-960MHz |
| Operating Temperature | -10~+55℃ |
| Storage temperature | -20~+75℃ |
| Read/Write Range | 20m |
| Specifications | 450*450*75mm |
| Applications | Logistics, door-to-door systems, anti-false systems and production process control... |
Product Photos

Product characteristics and advantages
• Autonomous intellectual property design;
• Work frequency 840-960 MHz (which can be adjusted to the requirements of different countries or regions);
◆ Designed based on Impinj R2000 reading and writing engine, full support is provided for electronic labels that conform to the EPC CLASS1 G2, ISO18000-6C standards;
• Working in broad-spectral jump frequency (FHSS) or ad hoc frequency launch mode to support RSSI functions, with peak labels exceeding 700 times/s;
• Output power up to 30 dBm (modifiable);
• Support for 4 external SMA antenna interfaces;
• Support for response and real-time survey work models;
• Label cache capacity: 1000 @up to 96bitsEPC;
• Support for the two conflict-prevention models of EP and TID;
• Low-utility design, single +8-25V power supply;
• Support for RS232 communications interface;
• Provides a dynamic connection library (DLL) and demonstration software source code to support secondary development;
• Precision and small design to meet the needs of a wide range of applications;
• There may be differences in the parameters and functions of this card reader, without further notice, in different national or regional standards and in different environments;
• A variety of wireless frequency recognition (RFID) systems, such as logistics, door-to-door systems, anti-false systems and production process control.
Power characteristics
Limit parameters
Power voltage (VCC): 12V
· Working temperature (TOPR): 20 ~ 55 °C
• Storage temperature (TSTR): -30 ~ + 70°C
Specifications (except for special instructions, the specifications indicated are taken from TA = 25°C and VCC = + 12V working conditions)
• Power voltage (VCC): 8-25(12 typical) V
• Work current (IC): 0.5-1.2 (typical 0.5) A
• Frequency of work (FREQ): 840-960 (typically 860-868/902-928) MHz
◆ Dimensions (L x W x H): 200 x 152 x 34 mm
Power interface DC JACK
◆ Central (PWR): Positive 12V power
◆ Ooter(GND): Land
Serial Communication Interface RS232 (DB5 Female)
◆ 1 (VCC): Power
◆ 2(GND): Land
◆ 3 (TXD): Serial communication data output
◆ 4 (RXD): Serial communication data input
◆ 5(GND): Land
ANT1~ANT8
Optional antenna
◆ UHF rounded 5Db antenna (860 mhz-960mhz), with a read-out range of 3-10 metres, depending on the length of the antenna feed.
◆ Linearly polarized 12 dB UHF antenna (902–960 MHz), with circular polarization optional. Read range: 10–35 m, depending on antenna feed cable length.
Product Photos

Product characteristics and advantages
◆ RFID reader ZJF603-2A is a high-performance UHF reading and writing device;
• Auto-intellectual property design, combined with its own efficient signal processing algorithms, to achieve rapid reading and writing processing of electronic labels while maintaining a high literacy rate;
◆ Extensive application to industrial 4.0 production management, museums, clothing management, tobacco logistics, food and medicine management, book management, licence plate protection identification, vehicle group movement control, smart parking administration, port entry/exit vehicle inspection control, warehouse material access control and identification control, baggage package recognition management, branding commodity security and various areas of use for wireless frequency identification (RFID) systems such as terminal container management.
Power characteristics
Limit parameters
Power voltage (VCC): 5V
Working temperature (TOPR): 20~65°C
• Storage temperature (TSTR): -30~+75°C
◆ Work humidity (Rh): +5% ~ +90% No condensation (Cooled)
Specifications
◆ Power voltage (VCC): 4.5 ~ 5.5 (typical 5) V
• Work current (IC): 1.5A
• Frequency of work (FREQ): 902-928 MHz
Product Photos

Product characteristics and advantages
◆ The ZJ205-2DBI RFID card reader conforms to EPC Class 1 Gen 2 and ISO 18000-6C.
• A reading-writing distance of 0.3 to 0.5 m, quick read-and-write cards (regulating the reading distance as required);
• Launch power can be set through communication interfaces, and read-and-written distance can be adjusted to complex on-site requirements;
• Enables the configuration parameters to be adjusted and, in due course, the data of the flyer label read and write;
• The card-issuer design has a trigger input that allows for the identification of labels in case of an external trigger event, meeting green environmental requirements and reducing energy consumption;
◆ The reader design has an external non-removable storage space, and in a closed application system, the label ID issued by this system can be stored in the repository in advance, compared with the user-stored ID when the reader recognizes the tag ID, and executes a predefined reading or user-designed action based on the results of the comparison;
• The use of high standard metrware, thermostats to ensure the consistency of parameters;
• Special application to parking and production water line management applications, personnel management etc.
Product Photos

Product Overview
◆ RFID card reader ZJ403 is a high-performance UHF reading and writing device;
• Auto-intellectual property design, combined with its own efficient signal processing algorithms, to achieve rapid reading and writing processing of electronic labels while maintaining a high literacy rate;
◆ The broad application is in the industrial production management of 4.0; museums; clothing management; tobacco logistics; food and medicine management; book management; licence plates identification management; vehicle assembly control; smart parking management; port-entry and exit vehicle inspection control; warehouse material access control and identification control; baggage package recognition management; brand-based commodity security management; and various areas of use for wireless frequency identification (RFID) systems, such as terminal container management.
Product Features
• Autonomous intellectual property design;
• Full support for the electronic labels that conform to the UHF EPC Gen2(ISO18000-6C) protocol;
• Advanced tag impact treatment algorithms, high-readability;
• FCC 902-928 MHz, CE 865-868 MHz (may be adjusted to the requirements of different countries or regions);
• Working on a wide spectrum of frequency (FHSS) or an ad hoc frequency launch;
• Output power: ...17dBm (modifiable);
• Built a receiving-and-receiving antenna to read distance < 500 mm and write distance < 200 mm;
• If a USB interface is selected, the USB interface will be powered without external power supply;
• Supports the USB 2.0 interface, the USB undisposed mode and the USB unexploited genuine keyboard method. (RS232, RS485\USB selection).
Product Photos


Ms. Lei
Mr. Pang