ZJTD09 Drive-Through RFID Tunnel for AGVs

Model: ZJTD09

Picture of the products of the AGV RFID Channel ZJTD09
The ZJTD09 is a flat-floor, drive-through RFID tunnel with two RF-shielded doors for batch reads in AGV material handling. When the AGV enters the read zone, a photoelectric trigger and the door controls coordinate the read cycle.

Product Overview

ZJTD09 uses a flat-end two-door structure for the RFID batch recognition of AGV automatic removal. The equipment is linked to the moving process as an item identification task, and the goods are collected by PV triggers and shielding through the AGV connection after AGV enters the identification area.

Construction and Selection

The size of the skin is 1.6 x 1.3 x 1.43 m, the internal space 1.2 x 1.1 x 1.0 m, the number of shield doors is 2 and the size is supported. The Westgate PLC is associated with SICK PVC to trigger, and the rolls are used for LICHUAN 200 W servers.

Tag Reading and Operating Cycle

Equipment is equipped with IMPINJ R 700, 4 Deputy Laird 9028 antenna, 15 inch Win11 touch-control workman and small ticket printer, labelled 8 boxes/min, 300 units/boxes. When docking AGV, you should include the station, stop, door state, recognition of completed and exit conditions.

Operation and Acceptance Testing

Internal clearance alone does not guarantee that every AGV can pass through. Confirm custom passage dimensions and interfaces based on the actual overall dimensions of the vehicle, load carrier, and goods together, allowing for positioning tolerances and safety clearances.

Specifications

Appearance dimensions (m)1.6 x 1.3 x 1.43 (Long x width x height)
Internal dimensions (m)1.2 x 1.1 x 1.0 (long x wide x high)
Number of blocked doors2
Customization NotesSize support set.
PowerSingle 220V, power 0.5KW
Control systemSiemens PLC
Computer (workman-one)i5; 8G RAM; 512G solid-state hard drive; Win11; 15 " touch one machine
Trigger PhotoelectricSICK Mirror Reverse
Rolling drapes.LICHUAN 200W for electric power
Small ticket printer width (mm)43 ~ 80
ReaderIMPINJ R700
AntennaLaird 9028 × 4
Test speed8 Box/min
Number of tests300 units/boxes
Block Distance20 cm shielding door; no leakage from the sides

Product Features

  • A flat-end two-screened door structure suitable for AGV port recognition.
  • Internal space 1.2 x 1.1 x 1.0 m, size support.
  • IMPINJ R 700 with 4 sub Laird 9028 antennas, nominally 300/boxes.
  • Siemens PLC, SICK PV and servo curtains, with small ticket printing.