UHF RFID desktop printer ZJP009
Model: ZJP009
Product Overview
ZJP009 desktop printers support high-reliability data writing, which allows one-time mass reading and writing labels. The antenna power autocalibration function, easily setting the read-and-written conditions for radio frequency recognition tags. The waste marker function automatically detects paper scrap and prints "forecast" on the paper surface, avoiding mislabeling. Supports general metal resistant labels and soft metal resistant label printing and reading and writing verification, and is flexible to apply to two different material labels.
Product Features
◆ 108 mm print width
• Supports 1.25 mm thick flexible metal resistant labels
◆ 300dpi print resolution
◆ For small, sporadic label printing & data writing
Specifications
• Printer type: ZJP009
1. Print parameters
• Printing mode: hot sensitivity/thermal printing printer
• Resolution: 300dpi
◆ Print width: ≤108 mm
◆ Print speed: ≤150 mm/s.
2. Thermal transfer ribbon
Carbon band diameter: 68mm
Carbon pellets size: 25.4 mm
• Carbon band length: 300 m
• Width: 33-110 mm
3. Graphics
Graphical processing: single-coloured image data such as PCX, BMP can be downloaded to SDRAM
4. Media
◆ Media roll diameter: ≤127 mm
• Media core size: 25.4 mm, 38.1 mm
• Medium width: 25 mm ~ 118 mm
5.RFID
• Support label type: support common dry gel frequency recognition and softness below 1.25 mm; special tags depending on the specific chip
◆ RFID frequency: 920.5–924.9 MHz; supports ISO18000-6C Type C and EPC Gen2.
◆ RFID writing method: Print before write, which supports printing both to the EPC, read-and-write only to the EPC, print only, read and read tag TID etc.
6. Control panel
◆ Key: one key (entry paper)
◆ Display: None
• Indicator lamps: three (power, failure, state (paperless/carbon belt))
7. Simulation
• Command Collection: ZPL, TSPL
8. Power supply parameters
◆ Input: AC100~240V@50~60Hz
• Output: 24VDC; 3A
9. Storage
◆ SDRAM:32MB
◆ FLASH:8MB
10. Communications interface
• Ploting: USB interface (2.0 full speed)
11.Test function
• Stamping sensors: black-mark detection, label testing, institutional testing, carbon belt testing
12. Physical properties
• Outer dimensions: 230 (wide) x 290 (deep) x 176 (high) mm
Colour: Black
◆ Weight: approximately 3kg
13. Environmental parameters
• Operating environment: Temperature: 0~45°C; Humidity: 20~95% RH (no condensation)
◆ Storage conditions: temperature −20 to 60 °C; humidity ≤95% RH at 40 °C, non-condensing.
Product Real

Additional Specifications
| Print Mode | Hot Sensitivity/Thermal Printing Printers |
|---|---|
| Resolution | 300dpi |
| Print width | ≤108mm |
| Print speed | ≤150mm/s |
| Graphic processing | Monochrome PCX, BMP and other image data can be downloaded to SDRAM |

Ms. Lei
Mr. Pang