ZJF202-4A Four-Port Fixed UHF RFID Reader

Model: ZJF202-4A

ZJF202-4A 4-channel UHF reader with external antennas, product image
An Impinj R2000-based fixed UHF reader with four external antenna ports for controlled read points.

Product Overview

◆ The ZJF202-4A is a high-performance four-channel UHF RFID tag reader/writer with external antennas.
• It uses the design of autonomous intellectual property rights and incorporates proprietary, efficient signal processing algorithms;
• This not only allows for the rapid processing of electronic tag reading and writing while maintaining a high literacy rate;
Thus, the equipment could be used in a wide range of areas including but not limited to logistics management, door-to-door systems, forgery protection and wireless frequency recognition (RFID) systems such as production process control.

Product Features

◆ Impinj R2000 for radio frequency core chip
High Performance Multiple Label Identification Algorithm
◆ A few label optimization algorithms
• Double CPU architecture design
• Rapid 4 antennas for inquiry
• Hardware dead-end monitoring
◆ Radio-frequency power amplifier PA protection
Zoom PA high power output
Antenna connection detection
• Simple and efficient software and hardware interfaces
• Board temperature sensors
◆ Outstanding label reading performance
A simple and efficient command system.
♪ A brilliant heat-dissemination design ♪

Specifications

• Model: ZJF202-4A
◆ Type: 4-channel UHF reader with external antennas.
◆ Outer dimensions: 200(L) x 204(W) x 30mm(H)
◆ Weight: 820g
• Shell material: aluminium
• Input voltage: DC12V-24V
• Stand-by current: <70mA
• Sleep status current: <100uA
◆ Work current: 800mA +/- 5% @DC 12V Input (33dBm output power average working current)
Working temperature: -30°C ~+70°C
• Storage temperature: -40 °C ~ + 85 °C
◆ Work humidity: < 95% (+ 25°C)
Air interface protocol: MEPC global UHF Class 1 Gen 2 / ISO 18000-6C
• Work spectrum range: 860 MHz ~ 960 MHz
◆ Output power: 0 ~ 33dBm
◆ Output power accuracy: +/- 1dB
◆ Output power flat: +/- 0.25 dB
• Receiving sensitivity: < -85dBm
• Inventory label peak speed: 700 per second
◆ Tag RSSI: supported
Antenna connection protection: support
• Environmental temperature monitoring: support
• Working model: single/intensive
Communications interface: RS232 or TCP/IP
GPIO: 2-way input, 2-way output
• Communication Porter Rate: Default 115200bps (configurable 38,400 or 460800)
◆ Thermal dispersion: air cooling
• Workspace support: US, Canada and other offices following U.S. FCC; Europe and other missions following EDSI EN 302 208 with & without LBT contributions; Mainland China; Japan; Korea; Malaysia; Taiwan
◆ Note: There may be differences in the parameters and functions of this card issuer in different national or regional standards and circumstances, without further notice

Additional Specifications

Enter voltageDC12V~24V
Operating Frequency860MHz ~960MHz
Operating Temperature- 30°C ~+70°C
Storage temperature- 40 °C~+ 85°C
Communications interfaceRS232 or TCP/IP
Product size200(L) x 204(W) x 30mm(H)

Product Photos

ZJF202-4A four-port UHF reader with external antennas, diagram 1

ZJF202-4A four-channel UHF reader/writer with external antennas, diagram 2

ZJF202-4A 4-channel UHF reader with external antennas, diagram 3

ZJF202-4A four-port UHF reader with external antennas, diagram 4