ZJF202-16A 16-Channel Fixed UHF Reader with External Antennas
Model: ZJF202-16A
At a large logistics sorting center, the 16-channel UHF reader with external antennas handles a continuous flow of goods into the sorting area. All 16 channels read the tags simultaneously so each item can be routed accurately. The reader monitors sorting in real time to catch errors, then scans the goods again before loading to verify the information and keep deliveries on track.
Product Overview
◆ The ZJF202-16A is a high-performance 16-channel UHF RFID tag reader/writer with external antennas.
• It uses the design of autonomous intellectual property rights and integrates proprietary, efficient signal-processing algorithms;
• This ensures not only that high literacy rates are maintained in all applications, but also that rapid reading and writing of electronic labels is achieved;
• The equipment could therefore be used in a wide range of areas, including but not limited to logistics management, door-to-door systems, forgery protection and production process control, to fully meet the needs of various wireless frequency recognition (RFID) systems.
• It uses the design of autonomous intellectual property rights and integrates proprietary, efficient signal-processing algorithms;
• This ensures not only that high literacy rates are maintained in all applications, but also that rapid reading and writing of electronic labels is achieved;
• The equipment could therefore be used in a wide range of areas, including but not limited to logistics management, door-to-door systems, forgery protection and production process control, to fully meet the needs of various wireless frequency recognition (RFID) systems.
Product Features
◆ Impinj R2000 for radio frequency core chip
High Performance Multiple Label Identification Algorithm
◆ A few label optimization algorithms
• Double CPU architecture design
• Rapid 4 antennas for inquiry
• Hardware dead-end monitoring
◆ Radio-frequency power amplifier PA protection
Zoom PA high power output
Antenna connection detection
• Simple and efficient software and hardware interfaces
• Board temperature sensors
◆ Outstanding label reading performance
A simple and efficient command system.
♪ A brilliant heat-dissemination design ♪
High Performance Multiple Label Identification Algorithm
◆ A few label optimization algorithms
• Double CPU architecture design
• Rapid 4 antennas for inquiry
• Hardware dead-end monitoring
◆ Radio-frequency power amplifier PA protection
Zoom PA high power output
Antenna connection detection
• Simple and efficient software and hardware interfaces
• Board temperature sensors
◆ Outstanding label reading performance
A simple and efficient command system.
♪ A brilliant heat-dissemination design ♪
Specifications
• Model: ZJF202-16A
◆ Type: 16-channel UHF reader with external antennas.
◆ Outer dimensions: 200(L) x 204(W) x 30mm(H)
◆ Weight: 850g
• Shell material: aluminium
• Input voltage: DC12V-24V
• Stand-by current: <70mA
• Sleep status current: <100uA
◆ Work current: 800mA +/- 5% @DC 12V Input (33dBm output power average working current)
Working temperature: -30°C ~+70°C
• Storage temperature: -40 °C ~ + 85 °C
◆ Work humidity: < 95% (+ 25°C)
Air interface protocol: MEPC global UHF Class 1 Gen 2 / ISO 18000-6C
• Work spectrum range: 860 MHz ~ 960 MHz
◆ Output power: 0 ~ 33dBm
◆ Output power accuracy: +/- 1dB
◆ Output power flat: +/- 0.25 dB
• Receiving sensitivity: < -85dBm
• Inventory label peak speed: 700 per second
◆ Tag RSSI: supported
Antenna connection protection: support
• Environmental temperature monitoring: support
• Working model: single/intensive
Communications interface: RS232 or TCP/IP
GPIO: 2-way input, 2-way output
• Communication Porter Rate: Default 115200bps (configurable 38,400 or 460800)
◆ Thermal dispersion: air cooling
• Workspace support: US, Canada and other offices following U.S. FCC; Europe and other missions following EDSI EN 302 208 with & without LBT contributions; Mainland China; Japan; Korea; Malaysia; Taiwan
◆ Type: 16-channel UHF reader with external antennas.
◆ Outer dimensions: 200(L) x 204(W) x 30mm(H)
◆ Weight: 850g
• Shell material: aluminium
• Input voltage: DC12V-24V
• Stand-by current: <70mA
• Sleep status current: <100uA
◆ Work current: 800mA +/- 5% @DC 12V Input (33dBm output power average working current)
Working temperature: -30°C ~+70°C
• Storage temperature: -40 °C ~ + 85 °C
◆ Work humidity: < 95% (+ 25°C)
Air interface protocol: MEPC global UHF Class 1 Gen 2 / ISO 18000-6C
• Work spectrum range: 860 MHz ~ 960 MHz
◆ Output power: 0 ~ 33dBm
◆ Output power accuracy: +/- 1dB
◆ Output power flat: +/- 0.25 dB
• Receiving sensitivity: < -85dBm
• Inventory label peak speed: 700 per second
◆ Tag RSSI: supported
Antenna connection protection: support
• Environmental temperature monitoring: support
• Working model: single/intensive
Communications interface: RS232 or TCP/IP
GPIO: 2-way input, 2-way output
• Communication Porter Rate: Default 115200bps (configurable 38,400 or 460800)
◆ Thermal dispersion: air cooling
• Workspace support: US, Canada and other offices following U.S. FCC; Europe and other missions following EDSI EN 302 208 with & without LBT contributions; Mainland China; Japan; Korea; Malaysia; Taiwan
◆ Note: There may be differences in the parameters and functions of this card issuer in different national or regional standards and circumstances, without further notice
Additional Specifications
| Power voltage | DC12V~24V |
|---|---|
| Operating Frequency | 860MHz ~960MHz |
| Operating Temperature | - 30°C ~+70°C |
| Storage temperature | - 40 °C~+ 85°C |
| Communications interface | RS232 or TCP/IP |
| Product size | 200(L) x 204(W) x 30mm(H) |
Product Photos

Ms. Lei
Mr. Pang