Long-range R2000 UHF one-stop ZJ603-5DBI
Model: ZJ603-5DBI
In the delivery area of the electrician warehouse, the UHF One is a strong helper for staff. When each batch of goods is ready to be shipped, the staff members scan the commodity labels with the UHF One to confirm the shipment information.
Product Overview
• The UHF R2000 ZJ603-5DBI, which fully supports the EPC C1G2 (ISO18000-6C) agreement through its corporately owned intellectual property design;
• The equipment operates at frequencies ranging from 840 to 960 MHz and can be adjusted to the requirements of different countries or regions;
• It works by wide-spectral jump frequency (FHSS) or an end-frequency launch, with output power adjusted through software at a step interval of 1 db and up to 30 dbm;
Antennas are configured in a variety of ways, including options 5dbi, 9dbi and 12dbi, with typical reading distance ranging from 8 to 35 metres and peak label queries exceeding 700 per second;
• A label cache can store 1,000 96bit EPC tags, using the MMCX antenna interface;
• The equipment is performing well in low-capacity design, with a wide range of working voltages that can only be operated by power supply from +3.7V to +5V;
• It also supports RS232 serial communication interfaces (3.3 V TTL level), which are highly stable and equipped with external dispersors to cool the air;
• In addition, equipment supports the development of C#, C++ and Delphi languages;
◆ The integrated reader can identify UHF passive temperature-sensing tags (ZJ-301T module). The reader/writer module's specifications and functions may vary with local standards and operating conditions.
◆ It is widely applied in the areas of various wireless frequency recognition (RFID) systems, including industrial production management at 4.0; museum management; clothing management; tobacco logistics; food medicine management; book management; security control for licence plates; vehicle fleeting and movement control; smart parking administration; port-to-port vehicle inspection control; warehouse access control and identification management; baggage package identification management; brand name commodity protection; and terminal container management.
• The equipment operates at frequencies ranging from 840 to 960 MHz and can be adjusted to the requirements of different countries or regions;
• It works by wide-spectral jump frequency (FHSS) or an end-frequency launch, with output power adjusted through software at a step interval of 1 db and up to 30 dbm;
Antennas are configured in a variety of ways, including options 5dbi, 9dbi and 12dbi, with typical reading distance ranging from 8 to 35 metres and peak label queries exceeding 700 per second;
• A label cache can store 1,000 96bit EPC tags, using the MMCX antenna interface;
• The equipment is performing well in low-capacity design, with a wide range of working voltages that can only be operated by power supply from +3.7V to +5V;
• It also supports RS232 serial communication interfaces (3.3 V TTL level), which are highly stable and equipped with external dispersors to cool the air;
• In addition, equipment supports the development of C#, C++ and Delphi languages;
◆ The integrated reader can identify UHF passive temperature-sensing tags (ZJ-301T module). The reader/writer module's specifications and functions may vary with local standards and operating conditions.
◆ It is widely applied in the areas of various wireless frequency recognition (RFID) systems, including industrial production management at 4.0; museum management; clothing management; tobacco logistics; food medicine management; book management; security control for licence plates; vehicle fleeting and movement control; smart parking administration; port-to-port vehicle inspection control; warehouse access control and identification management; baggage package identification management; brand name commodity protection; and terminal container management.
Electrical properties
Limit parameters
Power voltage (VCC): 5.5 V
Working temperature (TOPR): 20 ~ 65 °C
• Storage temperature (TSTR): 30 + 75 °C
◆ Operating humidity (Rh): +5% to +90%, non-condensing φ
Specifications
· Power voltage (VCC): 3.7-5.25 (5 typical) V
Work current (IC): 1500 mA
• Frequency of work (FREQ): 860-960 MHz
◆ Radiofrequency output power (PRF): 0-33 dBm
◆ Radio-frequency output power accuracy (APRF): +/-1 dB
◆ Radio-frequency output power flat (FRPF): +/- 0.2 dB
• Receiving sensitivity (SR): -85 dBm
Power voltage (VCC): 5.5 V
Working temperature (TOPR): 20 ~ 65 °C
• Storage temperature (TSTR): 30 + 75 °C
◆ Operating humidity (Rh): +5% to +90%, non-condensing φ
Specifications
· Power voltage (VCC): 3.7-5.25 (5 typical) V
Work current (IC): 1500 mA
• Frequency of work (FREQ): 860-960 MHz
◆ Radiofrequency output power (PRF): 0-33 dBm
◆ Radio-frequency output power accuracy (APRF): +/-1 dB
◆ Radio-frequency output power flat (FRPF): +/- 0.2 dB
• Receiving sensitivity (SR): -85 dBm
Wire interface
◆ Red: power
• Black: CND
◆ White: 232 TXD
◆ Purple: 232 RXD
◆ Brown: GND
◆ Yellow: Hutgen DATA0
• Deep green: Wegen DATA1
• Grey: CND
◆ Pink: 485 A+
◆ Orange: 485 B-
Light green: trigger T+
◆ Blue: Trigger T-
◆ Note: For the configuration of the TCPIP network interface, a standard RJ45 web plugin is attached; relays, bluetooth, WiFi can be customised.
• Black: CND
◆ White: 232 TXD
◆ Purple: 232 RXD
◆ Brown: GND
◆ Yellow: Hutgen DATA0
• Deep green: Wegen DATA1
• Grey: CND
◆ Pink: 485 A+
◆ Orange: 485 B-
Light green: trigger T+
◆ Blue: Trigger T-
◆ Note: For the configuration of the TCPIP network interface, a standard RJ45 web plugin is attached; relays, bluetooth, WiFi can be customised.
Other parameters
• Specification size: 210*210*70mm
• Product weight: 1.50 kg
• Reading and writing distance: 8-15m
• Protection standard: IP-65
◆ Power supply: DC12V, 25W adapter (conversion from AC220, 50Hz)
• Trigger interface: 1 input port
◆ Reading and writing mode: Doca (label) mode, speed of reading and writing < 0.1 seconds
Label rate: 100 km/h
• Directional reading card area: An antenna orientation map with reference configuration
Communications interface 1: RS232, RS485
◆ Communication interface 2: relay and RJ45 Ethernet output (optional TCP/IP; Wi-Fi and other options available on request)
◆ Work power: DC12V/2A adapter (AC220, 50Hz conversion)
◆ Note: There may be differences in the parameters and functions of this card reader in different national or regional standards and circumstances, without further notice.
• Product weight: 1.50 kg
• Reading and writing distance: 8-15m
• Protection standard: IP-65
◆ Power supply: DC12V, 25W adapter (conversion from AC220, 50Hz)
• Trigger interface: 1 input port
◆ Reading and writing mode: Doca (label) mode, speed of reading and writing < 0.1 seconds
Label rate: 100 km/h
• Directional reading card area: An antenna orientation map with reference configuration
Communications interface 1: RS232, RS485
◆ Communication interface 2: relay and RJ45 Ethernet output (optional TCP/IP; Wi-Fi and other options available on request)
◆ Work power: DC12V/2A adapter (AC220, 50Hz conversion)
◆ Note: There may be differences in the parameters and functions of this card reader in different national or regional standards and circumstances, without further notice.
Product Photos
Specifications
| Power voltage | 5.5V |
|---|---|
| Operating Frequency | 860-960MHz |
| Operating Temperature | -20~+65℃ |
| Storage temperature | -30~+75℃ |
| Read/Write Range | 8-15m |
| Specifications | 210*210*70mm |
| Applications | Industrial 4.0 Production Management, Museums, Clothing Management,... |

Ms. Lei
Mr. Pang