Resource-based base for asset management ZJB-50

Model: ZJB-50

Picture of the ZJB-50 product of the resource-oriented base station for asset management
In a large warehouse of the enterprise, the asset management source orientation base station is installed in every corner. On a daily basis, staff members drive through the full load of cargo, and asset management has a resource orientation base that accurately identifies the goods labels, and quickly checks assets' information. New assets are stored in the bank, they are entered rapidly; assets are borrowed, and then the process is recorded again. By using it, the business 's management of assets becomes well organized.

Product Overview

• The power-oriented base station for asset management, ZJB-50, is a generic type of equipment with an 8dbiPCB antenna that supports outdoor installation and waterproofing level IP65.
• There are three LED lamps below the device to indicate the working state of the device; an inline beeper can read the label status through acoustic tips, and sound is long enough to be used for software settings or shut down.
• Equipment is generated through a 15-chip cable for communication or powering with other equipment, including RS232, RS485, Wegen.
• 15-chip cables with a 15-chip end, which can be cut off in actual use and directly connected to other equipment or DB15 head; the equipment is configured with a test-specific extension panel and is not required for actual use.
• The equipment is configured primarily through RS232 interfaces, which must be completed by configuration software before being used.
• Main application scenarios: personnel access and attendance, tunnel construction staff attendance, mine site attendance, operational vehicles approaching the personnel security alarm system, asset management system, fixed assets management system.

 

Main product advantages

• Strong resistance to interference and protection from outside radio waves;
• Strong ability to read labels at the same time (high impact resistance);
• A buffer zone with 2000 labels;
• Support for outdoor installation;
• IP level: IP65;
• Read labels at a adjustable distance of 0-150 m (using software settings);
Zoom. Simple interfaces, easy to use.

 

Main functions

• Operational status of equipment (3 LEDs, beepers);
• The read labels are kept in the buffer zone and have a buffer capacity of 2,000 labels;
• Read the labels and be able to transmit them through RS232, RS485, Wegen 26/34/66;
• Communication modes have active and passive transmissions;
• RS232, RS485 communication rates can be set;
• Distance to read labels can be set (0-31 files);
• The interval between reading the same label can be set;
• The speed at which the labels can be uploaded;
• External trigger-starter readers;
• Capable of reading equipment exit information.

 

Basic information

• Model: ZJB-50
• Product type: 2.4G Active RFID reader
• Working frequency: 2.4GHz
~ Simultaneously read labels: greater than 2000
• Product material: ABS plastic
• Product colour: Grey
Antenna: Inside 8dbi antenna
• External connection: 15 core cables
• Communications interface: RS232, RS485, Wegen 26, Wergen 34 and Weegan 66
Status indicator: 3 LED light instructions, built-in beepers
• Power source: DC12-36V
• A rated power of 1W
· Working temperature (°C): -25°C ~ +75°C
◆ Storage temperature (°C): -40°C ~ +85°C
• Work moisture: less than 95%
· Equipment size: 250 mm x 250 mm x 58mm
• Device weight: 1.0 kg
• Packaging dimensions: 297 mm x 310 mm x 106 mm
• Number of packagings: 1
Packaging weight: 1.5 kg

 

Main technical parameters

• Working frequency: 2.4GHz-2.5GHz;
• Working methods: active and passive combinations;
• Structure: the mask is high temperature-resistant, low temperature-resistant ABS plastic;
Antenna parameters: incorporated 8dbi antenna;
• Communication interface: RS232, RS485, Wegen;
• Communication mode: active (readers read and written, sent to the top machine);
• A buffer capacity of 2,000 labels within the equipment;
• RS232, RS485 speed of communication can be set for users;
• System recognition distance: up to 150 m;
◆ Identification accuracy: 99.999999%;
• Provide demonstration software, API functions, etc.;
• The various data formats can be developed according to user requirements;
• Working voltage: DC12-36V;
• A rated power: 5W;
• Working temperature: -25°C ~ +75°C;
• Storage temperature (°C): -40°C ~ +85°C;
• Work moisture: less than 95%

 

List of product containers

• ZJB-50:1 sourced base station for asset management;
• Integrated equipment transfer boards: 1;
• AC-DC12V3A power adapter: 1;
• 3 ribs of straight lines: 1;
• DB15 Turning over: 1;
• Installation of a support rack: 1;
:: Qualifications: 1;
• External signal instructions: 1.

 

Size Chart

ZJB-50 size map of the active asset management orientation base station

Installing Fixed Charts

Installation of fixed maps for asset management resource-oriented base station ZJB-50

Product Photos

Map I of the live and resource-oriented base station for asset management, ZJB-50 Map II of the live and resource-oriented base station for asset management, ZJB-50 Figure III Flow of the ZJB-50 active asset management orientation base station Figure IV Flow of the ZJB-50 active asset management orientation base station

Specifications

Overall Dimensions250*250*58mm
Operating Frequency2.4GHz-2.5GHz
Operating Temperature-25~+75℃
Storage temperature-40~+85℃
Modus operandiActive and passive combinations
External connection15 core cables
ApplicationsAccess and attendance...