Full-door source base station ZJB-51

Model: ZJB-51

Photo of all-sourced ZJB-51 products in the interior
In modern smart plants, the full-sourced base station is a "back-to-back" of high-efficiency production. On the production line, workers assemble parts, equipment run data are quickly collected from all-sourced stations by electronic tags, and real time feedback on production progress is provided. On inspection, staff use base location devices to quickly screen anomalies. Scheduler links, fully integrated data into source-based stations in the interior, help to rationalize production tasks.

Product Overview

• The full-sourced base station ZJB-51, a generic type of equipment, is built into 3dbiPCB antennas and only for interior installation.
• There are three LED lamps below the device to indicate the working state of the device; an inline beeper can read the label status through acoustic tips, and sound is long enough to be used for software settings or shut down.
• Equipment interfaces include: TCP/IP portal, RS232, RS485, Wegen; and an in-house relay to read the card relay closed.
◆ The device is configured primarily through RS232 interfaces, which must be configured with the software before being used and also supports dial-up switches to configure common parameters.
• Main application scenarios: personnel access and attendance, tunnel construction staff attendance, mine site attendance, operational vehicles approaching the personnel security alarm system, asset management system, fixed assets management system.

 

Main product advantages

• Strong resistance to interference and protection from outside radio waves;
• Strong ability to read labels at the same time (high impact resistance);
• A buffer zone with 2000 labels;
• High water-resistant: IP56 (indoor use);
• Read labels at a adjustable distance of 0-50 metres (using software settings);
• Multiple interfaces, easy to use;
• Support for relay output;
• No external connection, all interfaces are integrated on the equipment.

 

Main functions

• Operational status of equipment (3 LED indicators, built-in beepers);
• Read labels are kept in the buffer zone with a buffer capacity of 2,000 labels;
• Read the labels and be able to transmit them through TCP/IP portal, RS232, RS485, Wegen 26/34/66;
• Communication modes have active and passive transmissions;
• RS232, RS485 communication rates can be set;
• Distance to read labels can be set (0-31 files);
• The interval between reading the same label can be set;
• The speed at which the labels can be uploaded;
• External trigger-starter readers;
• Supports the output of relays. When you read a label, the relays close and can be set up in software at closed hours;
• External input signals can be used to shut down relays;
• Supports dial-up switches to set common parameters;
• Capable of reading equipment exit information.

 

Basic information

• Model: ZJB-51
• Product type: 2.4G Active RFID reader
• Working frequency: 2.4GHz
~ Simultaneously read labels: greater than 2000
• Product material: ABS plastic
• Product colour: Grey
Antenna: Inline 3dbi antenna
◆ External connection: DC power plug, DB9-M, RJ45, 12P connector, dialer
• Communications interface: TCP/IP portal, RS232, RS485, Wegen 26, Wergen 34, Weegan 66
◆ Status indicator: Bottom 3 LED light instructions, built-in beeper
• Relay output: When read to card, relays are closed and closed at closed hours through software settings
◆ Trigger reading card signal: trigger the read card signal outside and trigger post-read card delay can be set by software
◆ Status input signal: information on the status of the journey, which can also be used to shut down relays
• Power source: DC12-36V
• A rated power of 1W
· Working temperature (°C): -25°C ~ +75°C
· Storage temperature (°C): -40°C ~ +85°C
• Work moisture: less than 95%
• Equipment dimensions: 168 mm x 50 mm
• Equipment weight: 1kg
• Packaging size: 250 mm x 250 mm x 80 mm
• Number of packagings: 1
Packaging weight: 1.5 kg

 

Main technical parameters

• Working frequency: 2.4GHz-2.5GHz;
• Working methods: active and passive combinations;
• Structure: the mask is high temperature-resistant, low temperature-resistant ABS plastic;
Antenna parameters: incorporated 3dbi antenna;
• Communication interface: TCP/IP portal, RS 232, RS 485, Wegen 26, Wergen 34 and Weegan 66;
• Communication mode: active (readers read and written, sent to the top machine);
• A buffer capacity of 2,000 labels within the equipment;
• RS232, RS485 speed of communication can be set for users;
• Reading card distance: 50 m;
◆ Identification accuracy: 99.999999%;
• Provide demonstration software, API functions, etc.;
• The various data formats can be developed according to user requirements;
• Working voltage: DC12-36V;
• A rated power of 1 W;
• Working temperature: -25°C ~ +75°C;
• Storage temperature (°C): -40°C ~ +85°C;
• Work moisture: less than 95 per cent;
• Equipment dimensions: 168 mm x 50 mm;
• Equipment weight: 1.0 kg;
• Packaging dimensions: 250 mm x 250 mm x 80 mm;
• Number of packagings: 1;
• Packaging weight: 1.5 kg.

 

List of product containers

• ZJB-51:1 full-source base station in the interior;
• AC-DC12V3A power adapter: 1;
• 3 ribs of straight lines: 1;
• Installation of a support rack: 1;
:: Qualifications: 1;
• External signal instructions: 1.

 

Product Photos

Show me the first picture of the live-source base station ZJB-51. Shows the live display of ZJB-51 at all indoors

Specifications

Overall Dimensions250*250*80mm
Operating Frequency2.4GHz-2.5GHz
Operating Temperature-25~+75℃
Storage temperature-40~+85℃
Modus operandiActive and passive combinations
Antenna parametersInline 3dbi antenna
ApplicationsPersonnel out...