What are the functions of the asset positioning management system? Real-time location and accountability management
The central focus of the asset positioning management system is to move "where, who, what status and " from paper to screen. The common system usually contains six functional modules around two main lines: position collection, map presentation, liability binding, unusual alerts, inventory verification and data reports.
Point 1: Positioning and collecting -- what technology is used to "get out" assets?
Positioning is the eye of the system, and technologies vary greatly from one scene to another. A wide range of outdoor assets, such as engineering vehicles, containers, municipal facilities, are mainly GPS or BeiDou modules, with positioning accuracy generally in 5-10 metres, and an open environment can be within 3 metres; a battery can last six months to two years depending on the frequency of return.
Indoor or small-scale scenes, such as warehouse trays, hospital equipment, office notebooks, more suitable for Bluetooth AOA, UWB, RFID labels: UWB precision up to 10-30 cm, medical treatment that requires precise search, valuable instrument scenes; RFID mass reading distance from a few metres to ten meters, lowest cost, and access library mass recognition.
A spectrogenic system supports a variety of technologies, which are tailored to asset types and the environment on the ground, rather than one-size-fits-all. We usually ask first in the project: Are your assets mainly outdoors or indoors? The answer is direct to the hardware program, and to the cost of hardware for each asset behind.
Element 2: Map presentation - turning coordinates into visible trajectory
The coordinates are meaningless, so the administrator must see where they are. The map module typically contains three layers of view:
- General:A large chart showing the location, status and responsible labels of all online assets is suitable for a movement centre or a large screen command scene.
- Track playback:Selecting the time period, moving an asset out of the last 24 hours' drive, often used to reset "Why didn't this car show up yesterday?"
- Floor/indoor maps:CAD plan stacked onto the map, with bluetooth AOA or UWB, and positioning accuracy shown on specific floors, rooms.
The frequency of data updates can normally be 1 second, 5 seconds, 30 seconds, 5 minutes. The higher the frequency, the faster the power, the battery-type device usually takes 5 seconds to 30 seconds, and it is enough to see where it's going; the fixed equipment for external power supply considers high frequency back transmission.
Point 3: Attribution of responsibility — how people and assets are tied
The responsibility module supports three levels of binding: the asset belongs to the department, the sub-accounter, the user. For example, a notebook belongs to the "market office in Shanghai", the supervisor is Li, the user is a small sheet. The system maintains a liability list based on this three level relationship, and then it is exported and then a "assets liability list" that is reconciled with the administrative desk.
Every change in the responsible person leaves a mark: who gives this device to whom, e-sign or sweep. Asset transfer, loan, end of life, status change synchronized into this liability sheet, avoiding "a computer on account, not found in the actual storeroom."
Many projects we'll do a field cleansing and standardization of the original Excel liability table, which is then put into the system. It doesn't look like much, and all the people in the back, department-based queries can run on it. And only if the fields are unified, responsibility data will not be confused when the inter-departmental transfer takes place.
Point 4: Aberrant alarms - location deviation, hyperzone, long-term hold.
The alarm is part of the real "live" of the locator system, and without it there's only a hindsight. There are four common rules:
- Electronic fence alert:The assets are assigned a geographical area (round, polygon, route) of permitted activities and are transferred from time to time.
- Long time without calling the police:Equipment is static beyond the time set (e.g. 72 hours) and alerts whether it is idle, lost or malfunctioning.
- Low-alert alarm:When the LTA cell is below the threshold (generally set at 10-15%) notification is replaced to avoid a sudden break in signal.
- Offline alert:The label is not returned for more than the expected time, and the hint may be lost or damaged.
The alarm is sent through the APP, text messages, corporate micro-letters or nail robots, and key alerts are to support the upgrade mechanism, such as a 30-minute absence of responsibility, automatic push to the top supervisor, so that the alarm is not ignored. The result is also to leave a mark on what rules will work and what noise will be used in future.
Point 5: Inventory verification - to make the count match no more "numbers"
Manual stocktaking means checking items against a paper list. It's manageable for 100 or 200 assets, but takes real effort once there are thousands or tens of thousands. A location system offers two approaches:
- Passive disc:The RFID reader is installed at the warehouse entrance or building entrance, and a book is automatically recorded when the label enters and leaves, suitable for mass identification in the closed space and virtually without manual participation.
- Active inventory:The PDA or mobile phone AP was brought close to the device to read the BLE/UWB label, and the single station was cleaned in 2-3 seconds, and two persons could be finished half a day at a warehouse of about 200 units.
The difference is summarized by department, which in turn helps to locate the long-term blind areas that have not been located.
Element 6: Data report interface with system
The location and responsibility data are an asset in themselves after the system runs for several months.
- Asset distribution hottest attempt (by building, sector, region)
- Change of curriculum vitae by responsible person (directly obtained during compliance audit)
- Police processing of time-bar statistics (assessment of the speed of response by duty-bearers)
- Assets idleness statement (list of equipment that remained unmoved for 30 consecutive days)
On external interface, the formal system typically provides API or intermediate database tables that can connect to existing OAs, ERP, financial systems -- add assets, transfer, synchronize financial records at end of life, avoid "systems, accounts." In Shanghai, a quick project delivery, interfaces usually account for 20-30% of the total duration of the work, and cannot be saved, otherwise the subsequent account will not match with the next one.
Implementation of the recommendation: Run through a small closed ring
Six modules are looking at a lot, and it is recommended that not all of them. Most projects experience runs the four pieces of "Landing + Maps + Responsibility + Alert" first, covering the type of asset you're most interested in -- typically the one that is the easiest to lose, the one with the highest unit price or compliance requirements, first by running people and data, then stacking up the plate and docking with the outside.
Two other things worth thinking about in advance: the one is the continuation and replacement cycle of the label battery, which determines the cost of maintenance and human input at a later stage; the other is where responsible data comes from, who is responsible for long-term maintenance, and it decides whether the system can be "corrected" over time. The two questions are clear that the system is almost halfway down.

Ms. Lei
Mr. Pang