Paths to application of rfid technology in industrial networking and analysis of landing points
RFID Knowledge

Paths to application of rfid technology in industrial networking and analysis of landing points

PublishedShanghai Zejie Smart Technology Co., Ltd.

The central issue to be addressed by RFID in the industrial goods network is whether each material, every device, and every piece of work is equipped with an automatically identifiable "digital identity". The key to landing or failure is not how far technology goes, but whether the selection matches the scene, whether the deployment location is reasonable, and whether data can reach the upper-level system.

1. Clear scene: first answer which process RFID is to replace or enhance

Instead of starting with "we're going to go to RFID," we have to push it from the point of pain. The usual industrial scenes are: tracking of products in production line (WIP, which is a semi-finished product that flows between processes), inventory of warehouse access and inventory, life cycle management of tools/packages/plugins, equipment inspection records binding, mistorious tracking downstream of production lines.

If there is a manual scan in the current process, hand-written billboards, visual check actions, and error rates or time costs have affected capacity, RFID usually brings visible benefits. Shanghai-based technology in many manufacturing categories places entry points at both the assembly management and access vaults, low modification costs, short return cycles.

2. Selecting the frequency band and label type

The RFID is divided into different frequency bands, such as low-frequency, high-frequency, ultra-high-frequency, active, etc. The difference is mainly in the recognition distance, reading and writing speed and metal resistance.

Frequency bands Typical distance Applications
Low frequency LF Less than 10 cm Closeness of metal environment recognition, such as work-loading
HF HF About 10 cm. Single-part recognition, permissions class scene
UHF UHF 3-10 metres Warehousing, production line batch identification
Active RFID Dozens of meters. Large packagings, mobile assets

UHF is the most frequently used frequency in industrial scenes. The metal surface or liquid environment must be labelled as resistant to metals, and it is easy to ignore when a general label is not available.

3. Location of deployment of readers and antennas

The deployment position directly determines the reading and error rate, which affects landing more than the equipment selection.

Shanghai-based technology found differences in the readout rates of the warehouse platform and the production line transfer points, often fine-tuned from antenna angles. Changing the antenna from vertical to 30 degrees downwards would increase the reading success rate from 85 per cent to over 99 per cent.

4. Data access: interface between intermediate and upper-level systems

Reader output is the original label EPC data (EPC is an electronic product code, which corresponds to the ID number of each label), which must be filtered through a middle, heavy, associated business field in order to reach MES, WMS or ERP.

It is recommended that the first step be to align the data dictionary: when, when and who will maintain the rules by tying the label ID. Without this step, all subsequent statements will be confused.

5. Reliability design in bad circumstances

The industrial site is not a laboratory, temperature, oil pollution, vibration, electromagnetic interference. Common responses: label work temperature covers -40°C to 85°C; metal or liquid scenes must be marked with a special metal resistance label; readers' shell protection level at least IP65; equipment is away from the frequency variant, electric power, high power power power (at least 1 m); double-reading writer redundancy at key points does not affect overall data collection.

6. Rollout sequence: pilot, validate, then scale

Do not spread at once, select a section or warehouse to pilot it, run through and then extend horizontally.

The most exposed question for the pilot period is not technology, but business habits - whether operators will change voluntarily when standard labelling and labels are damaged, all of which need to be clearly documented in the process.

7. ROI Assessment and Long-term Transport

Return on investment depends mainly on labor savings, lower error rates, and faster inventory turnover. Indicative results vary widely by industry: 60%–80% less warehouse counting labor, wrong-material rates down from several in a thousand to under one in 10,000, and work-in-process visibility improving from days to minutes.

Two things to do in the field: first, a standard process for tagging and replacement, and second, an automatic alarm in case of anomalies by connecting the reading and writing state monitoring to the existing platform.

The technology itself is more mature in the industrial networking, and it's much more of a match of scenes, deployment details and data governance. First, we go from a painfully clear section to quantify benefits, and then we test reading rates and process smoothness, then we copy them horizontally, which is the real path for most factories to run through RFID projects.