RFID Device Selection Parsing: Readers, Handhelds and Printing Devices
RFID Knowledge

RFID Device Selection Parsing: Readers, Handhelds and Printing Devices

PublishedShanghai Zejie Smart Technology Co., Ltd.

The core of the RFID device selection is a closed loop, with readers, handhelds, printing devices, by business scene: fixed-type readers are responsible for bulk identification of entry and exit points, handheld machines are responsible for counting, searching for goods, inspection, etc. mobile operations, RFID label printers are responsible for mass printing of identifiable labels on site or in warehouses. The three are not substitutes for each other, but rather for the division of tasks. The type is based on a line of business -- running through water, stocking, retailing, rewinding frequency, power, antennas, protocol parameters, etc., to avoid price-for-money or new at first.

What roles are the reading, handheld and printing devices each?

The functional boundaries of the three devices are clearly defined before they can be selected in a way that is not disruptive.

Fixed ReaderTypically installed at warehouse entrances and exits, production stations, or sorting lines, these units use portal or directional antennas to identify passing goods automatically in bulk. No operator intervention is needed. Range runs from 1 m to over 10 m and common UHF frequencies are 860–960 MHz. The equipment suits workflows where goods move past a stationary read point.

RFID handheldIt's also called a handheld terminal or a PDA, which is equivalent to putting a reading and writing module into an industrial-grade scrutinizing gun. The operator holds it between the shelves, presses it to trigger reading, then returns the data to WMS or ERP systems. Reading distances are usually between 0 and 8 meters depending on antenna design and power.

RFID tag printerIt looks like a normal bar-code printer, but there's an additional RFID reading and writing module and antenna. It can print the data in the label chip while printing the bar code, and then check what's written in it, right, for clothing, retailing, logistics single-ware tag scenes.

Fixed reading and writing machines, first to determine which type of business is more important?

The first step in choosing a type is not to look at the brand or parameters, but rather to answer the question: does the identification of goods take place mainly in fixed working places or is it spread across the various parts of the warehouse?

If you are a manufacturer, the goods flow at a flat speed along the line of production, then fixed-readers + door antennas will suffice. Handhelds can be supplemented by a check or unusual trace at the end of the line of manufacture.

If you are a warehouse logistics company, you need thousands of slots per day, fixed-readers use the platform and access gate for channel identification, and inside the warehouse, you use handheld machines to make circular counts. The two are superimposed, not double-checking.

If you are a retail or clothing store, the fixed reading and writing machine is used mainly in the receiving area. The search, inventory, reverse search machine is common in a 200-square clothing door shop with 1-2 handheld machines.

In most of the projects we've done, the mix of medium-sized warehouses is "Put-in 2-4 + handheld 3-6 + label printer 1-2" depending on the number of corridors and the size of the storage area.

What difference does RFID label printer make to normal bar-code printer?

Many people would mix these two types of equipment, but their differences directly affect the selection.

The standard bar-code printer is only responsible for printing the bar code on the label surface, and the label itself is a paper with printed patterns. In addition to printing, two things are required for RFID tag printers: to write data into the label chip and to verify whether or not it has been successful.

This difference has three practical implications:

How do different industries fit these three types of equipment?

The combination of the different industries and modes of integration varies considerably.

Manufacturing line: Fixed reader + tunnel antenna (workspace reading) + RFID printer (sequencing tag). Handheld is used mainly for product sampling and unusual traceability.

Third-party logistics warehouse: Fixed reading and writing machines are installed on the platform access route (Vehicle Identification+Current Reader) and inside the warehouse, a manual, technical, is used to make a space inventory. The RFID printer is concentrated in the postmarking booths and then printed centrally and distributed to the cargo slots.

Retailing of clothing(b) The receiving area is used for bulk receipt with a fixed reader, door shop handheld to make inventory and search, and RFID printers are used to print new labels when refilling or moving.

Library archives management: Fixed reading and writing machines are used in self-service loan routes, handheld machines for collection counts and frame (numbered examination of the shelf), and RFID printers are relatively low since book labels are usually preset at the time of purchase.

What parameters do you need to focus on when choosing a model?

Too many parameters are easy to see, and first we grab these cores:

And there's another parameter that is often overlooked.Multilabel collision resistance. When dozens or even hundreds of labels are simultaneously in the antenna, the ability to read and write is very different from one to another, so that they can be identified and avoid leakages within a short time.

What are the easy pits for deployment?

Compatibility between equipment and equipment is often more problematic than the performance of single-desk equipment.

The first pit is...Frequency and protocol mismatch. Readers support Gen 2, but if the label is an early, irregular model, reading and writing distance and accuracy drops off the cliff.

The second pit is...An antenna covers the blind zone.. When a fixed reader is associated with the door antenna, if the angle between the two doors is not fixed, there will be an unrecognized dead corner in the middle. It is common to do field surveys first, simulate the actual route of the consignment with handheld machines, and indicate the effective range of each antenna.

The third pit is...Printer writing failed untried. Some low-cost RFID printers continue to print bar codes after writing failure, without calling the police, leading to bad labels going into the warehouse. This is done by using the printer's read-back check function as a bottom and by setting an unusual alarm at the software level.

The fourth pit is...Data protocol for handheld and back-office systems. The docking fields of the handheld back-to-back data format (JSON, XML, CSV) and ERP/WMS need to be agreed in advance, otherwise the interface will be re-engineered over time when you are debugging on site. We usually run two rounds of data streams in the test environment before we deploy to the field.

Summary

The key to the RFID device selection is not " which brand is best" but "what your business line is." First, combo where the action is being identified, read and write for fixed spaces, mobile scenes with handheld, need field-marked printers using RFID, then match frequencies, protocol, distance and protection levels, and then do a live test with real label. The equipment and equipment also needs to focus on frequency, antenna, compatibility of protocols and data interfaces, avoid single point selection, combine fight with each other.

If the project involves the total landing of RFID in storage, production line or retail scenes, it can start with business arctic combing and reverse-drive equipment configuration, so that the selected option is much more stable in its actual use.