RFID Printer Carbon Belt Shelter Guide: These points need to be kept in mind
The installation of carbon belts is a key step in the use of RFID printers, and inappropriate installation affects print quality and equipment life.
Pre-installation: Select the appropriate carbon band, based on the RFID printer specifications. Different printers have different requirements for the width, length, material etc. of the carbon band, and error in selection may result in a failure to properly install or print it out. Meanwhile, check if the belt is broken, wrinkled, and the carbon belts of unsatisfactory quality are not used.
The installation element: Ensure that the printer is closed and avoids an accident during operation. Open the printer's carbon belt, be careful not to overwrite the door or internal parts. Place the carbon belt carefully in the carbon belt, and keep in mind the paper-stepping path of the carbon belt, which must fit with the paper structure inside the printer, ensuring that the carbon belt passes smoothly. The label side of the carbon belt is directed towards the head of the print, and many users are easily re-assembled, which leads to a blurry or unprintable printing.
The tension adjustment: adjusts the pressure of the carbon belt to make it neither too tight nor too loose. Overstretching can break the carbon belt, and overtone can cause the carbon belt to run off during printing, affecting the accuracy of printing. It can be fine-tuned by a tension adjuster on the printer until the carbon belt is stable.
Post-installation check: After installation is complete, the carbon belt is pulled light and smooth, and there are no carton phenomena. You can also print a test page to see the printing effect, which, if it is vague, the re-enactment of the band may be due to the inappropriate installation of the belt, and the steps for its installation need to be re-checked.
The proper installation of carbon bands is the basis for ensuring that RFID printers are running steadily and printing with high quality, and users must carefully follow the above-mentioned attention so that printers can serve their work efficiently.

Ms. Lei
Mr. Pang