IT Asset Management System innovation: smart management to respond easily to challenges
The RFID helps in physical verification and does not automatically read all configurations.
IT asset management needs to connect physical objects and configure facts.
The identity of the asset should be clearly matched to the serial number, the hanger location, the accessories and the operating system.
Reads the labels in the vicinity of the cabinet are not sufficient to prove that the device is located at a precise slot, let alone that it has been updated on-line or security patches.
The IT asset is physically equipped, logically configured and differently identified than using an account number. Changing or re-installing a system does not necessarily mean adding an asset. It should be clear about the relationship between the various layers of objects, preventing the hardware from being correctly counted, but it cannot explain the software configuration and responsibility for its use.
Assets can be found and responsibilities and status are required to be explained
The fixed assets account should separate the asset identity, custody responsibility, physical location and life-cycle status. Labeling can reduce collection costs, but does not automatically address such management issues as unrecorded and undiscounted transactions.
Don't let the new observations cover the original responsibility without preconditions.
The physical inventory reveals a lead on the ground, and the billing contains an approved fact of responsibility that may be temporarily different. Automatically updating the custodian or writing off assets directly with unread results can override the necessary judgement. The system should generate differences, link evidence, adjust through clear authority and retain the previous status. The difference is not a dirty data that must be eliminated immediately; it may be just what the organization needs to see before the facts are verified. It is more meaningful to manage the difference than to keep the interface straight.
An easily ignored reversal.
The server body is in the library, not to mention that the original hard drive is also there, and not to say that the configuration remains unchanged. The component particle size needs to be determined by management target and linked to the configuration change record. Physical inventory and configuration audit can complement each other, but none of them should be impersonated as another.
Put your judgment in the real situation.
Arrangements for equipment removal, replacement and end-of-life of spare parts to verify the consistency of desk accounts, configurations and physical identification.
It is recommended that a realistic baseline be established for a group of assets, followed by a loan, movement, maintenance and end-of-life arrangement. The system should allow for discrepancies to be detected, evidence to be reviewed and adjusted with authorization, rather than allowing new scanning results to cover all history directly.
How many bases do you have to decide what's worth?
| Observation dimensions | Evidence to be retained |
|---|---|
| Concordance | Undisclosed, unincorporated and abnormally separated. |
| Continuity of responsibilities | Loans, restitution and transfer are retroactive |
| Quality of write-offs | End-of-life or change of bid does not result in duplicate assets |
| This is the key trade-off. | Are you going to confirm whether “the equipment is still in place” or “the service is still operating on authorized and maintenanceable equipment”? |
It's worth asking.
Are you going to confirm whether “the equipment is still in place” or “the service is still operating on authorized and maintenanceable equipment”?

Ms. Lei
Mr. Pang