How does the fixed asset RFID management software differ from the bar code management software?
Last year, a precision plant was counted, more than 3000 devices were coded and the warehousekeeper was one sweep. Oil cover was unpainted, high-value equipment was put up to carry ladders for five days, and one afternoon after RFID was replaced. The core conclusion: barcodes are cheap, hand-to-hand, but only close to one-on-one sweeps, slow plates, labels are worn, suitable for low assets, clean scenes; RFID is large, but can be read from a distance, anti-pollution, can be repeated, fit for asset-rich, mobile or complex environments.
Where the hell was that count?
The customer is a factory that does sophisticated parts, and the factory has bar-coded labels on its computer from the CNC processing centre to the office. The way of annual inventory counts is traditional: two warehousekeepers each carry a hand-gun and one sweeps the other.
The first day went reasonably well. Things got messy on day two. Some tags had to be wiped clean of grease, others were high enough to need a ladder, and some were tucked into gaps that could only be reached by moving boxes. Thousands of codes built up in the scanner and had to be checked against the asset system one by one back at the office. A mismatch meant going back to find and rescan the machine. The stocktake cost two counters and a data clerk eight person-days in all. And dozens of machines were still "missing" in the system. They were physically there, but the tags had been missed or the IDs did not match.
After the year, the clients came to us and thought of a different way. We went to the scene, where metal equipment was dense, production lines were moving, space was narrow, bar-coded processes could not be carried out. They reevaluated that RFID electronic tags (the chip-resistant label) had been placed on high-value floors, and the office computer continued to use the bar code. The count was done one year later, the RFID set was cleaned up in the afternoon, and the bar-code area was still two days away, but the overall workload was over 60 per cent less than the previous year.
Two ways of identifying. Where's the poor working method?
The bar code is essentially a string encoded in black and white, with the eye being able to recognize, a laser or LED light sent out by the scanner, reflecting back on the barcode and decoded. Close enough, angle right, surface clean, read out; no one can read out.
RFID is radio frequency recognition. The label contains a chip and an antenna, the reader sends a certain frequency of electromagnetic waves, and the label senses back to the data stored in the chip. The whole identification process does not need light or right, so it can be read from the cardboard, plastic, woodboard. But metal and water interfere with electromagnetic waves, and normal labels are not read on the metal case, so industry usually uses a specific anti-metal RFID label, which is more expensive.
RFID also has a frequency segment. The HF (HF, 13.56 MHz) recognizes short distances for a cartoon, door-barrel, small payment; the HHF (UHF, 860-960 MHz) is used to take long-range batch counts, and can read them in a few metres or even ten meters. Asset count counts are wrong, and the function is not right.
How much is the efficiency gap in the inventory?
Efficiency is the most intuitive difference between the two:
- Barcoded handguns: skilled operators can sweep 30 to 50 items in a minute, each one being pointed and pressed.
- RFID Handheld Terminals: Individual reading is similar to bar code, but the advantage is in bulk -- an asset labelled with RFID labels enter electromagnetic wave coverage automatically, and dozens of hundreds of pieces are common in a second.
- Fixed RFID channels or door barriers: A set of antennas is installed at the entrance to the warehouse, and the asset cart is once in a while reading all the tags on the vehicle without human operation.
For example, counting 200 servers as they are racked in an equipment room takes two people at least 40 minutes with barcodes. With an RFID portal, push the cart through and all are read in three seconds.
But the RFID mass reading presupposes that the label is in the electromagnetic wave range. If assets are stuck in a tin cabinet, piled up in a corner, and separated from walls, the signal will be blocked. So, in practice, it is often used with RFID and fixed channels, which are not covered in a single way.
Durable, anti-pollution and long-term cost comparisons
Barcode labels are printed, oily, water-fearing, sun-burning, and RFID electronic tags are sealed chips that are worn out or dropped. The usual technical-grade anti-metallic labels are high-level protection, IP67 and even IP68 (first digital dust protection in IP protection, second water protection, higher protection for the number), oil-resistant, high temperature tolerance, acid-resistant alkalis, plant workshops and outdoor assets are more robustly used.
The cost cannot be considered solely at unit price:
- A single bar-code label with a few cents, and a slightly more expensive but only one or two cents for thermal printing of the label;
- UHF on-metal RFID tags usually cost CNY 1-3 each, with higher-quality tags costing more;
- Handheld barcode scanners cost from a few hundred to CNY 2,000 each;
- RFID handhelds range from 2,000–3,000 yuan to 5,000–6,000 yuan. Fixed readers and antennas cost more, and a complete installation can run from tens to hundreds of thousands of yuan.
RFID costs more upfront but saves substantial labor. A midsize factory with more than 1,000 assets and two counts a year could save enough on labor in one year to pay for a batch of readers. When calculating long-term TCO, or total cost of ownership from purchase to retirement, include consumables, labor, and time, not just hardware prices.
How to fit the scene: Selective decision-making
The scenes that apply to the bar code usually meet these conditions:
- (a) The small number of assets, up to several hundred;
- (a) The environment is clean and labelling is not easily worn;
- (b) Budgeted and fast-tracked;
- The asset is relatively fixed and does not require frequent moving inventories.
The RFID application is usually:
- (a) The number of assets, thousands or even tens of thousands;
- (b) Metals are multi-hulled and equipment intensive, provided that anti-metallic labels are selected;
- (b) High frequency of inventories and strict time limits;
- (a) The location of assets is dispersed and requires mobile inspection or rapid positioning;
- The site is in a bad environment and labels are prone to dirty wear and tear.
The advantage of RFID is that it supports the mass reading and data automatically into the library, and if the management software only supports entry on a case-by-case basis and manual checking, then the RFID hardware is bought in vain. The package is imported in bulk, automatically weighting, and supporting abnormal tips.
Mixed use: selection recommendations and pit-scraping guidelines
In the actual project, RFID and bar code are rarely selected in one place, more often in a mixed scenario.
When Shanghai Selective Technologies is on the land project, they usually do an asset inventory with their clients: classify assets by class, value, location, environment grouping, and then match identification methods and management strategies separately. Once the process is completed, the system automatically identifies the RFID channel or bar-code scanner that is removed when the inventory is completed, and the data falls into the same asset list, avoiding a single one-way situation in each of the two systems.
Several common pits should be avoided during the selection:
- Adopting RFID without a clear need. If you have only 200–300 assets and they're all in offices, the equipment can cost as much as several years of labor. It isn't necessary.
- The normal RFID label is directly attached to the metal device. The metal will shield the signal, and the general tag will not be read in a basic way and must be anti-metal labeled.
- Ignores the distance to read and write and the frequency range. Assets are shown in UHF, stacked in a dense pile of HF, and the distance mark is wrong.
- The management software is not up to date. RFID data requires software that can be imported in bulk, automatically deweighted, and that has an abnormality alert, and light hardware upgrades are insufficient.
And back to the original question: choose RFID or bar code, which is essentially a matching issue. The size of assets, setting environment, budget structure, frequency, and several variables are contrasted, and the answer is basically there. Small, simple environments, tight budgets, more practical bar codes; big, metal-intensive, mobile, and RFID-long-term benefits are more obvious.

Ms. Lei
Mr. Pang