What's a good warehouse management system?
RFID Knowledge

What's a good warehouse management system?

PublishedShanghai Zejie Smart Technology Co., Ltd.

Compare the storage management system (WMS), which cannot be seen only if there is a RFID interface in the functional list. What really needs to be judged is whether the system can establish a stable correspondence between physical, label, inventory records and operating documents, and then mounts, moves, selects, reviews, sends and Zinventory counting each link with a traceable record. The RFID can reduce the operation of the piece-by-case sweep, but it does not automatically eliminate mislabelling, basic data errors, process overloading or equipment leakage. The selection should be based on the warehouse ' s cargo form, operational festivals and error costs, and design a comparison that can be verified on site.

First clear the difference: which operational node the error occurred

When the number of systems and the number of sites is found to be different, do not generally attribute the reason as "no count". The discrepancy should be traced by material, batch, tray, repository and document, and the anomaly should be classified as a verifiable type: The control points for each category of difference differ, and only if the error is found to the entry point on the book can you judge whether it should be solved by WMS rules, field processes, data governance or reading devices.

It is recommended that the calibration of the reconciliation rate be entered into the project programme first. For example, a sample of the stocking position is based on “the number of units in stock corresponding to the number of items on the book and the quantity on the board” and separate records are maintained for the exact amount, labels are tied to the accuracy rate and supporting documents are timely billing rates. The statistical units and the drawing range of different warehouses may differ, cannot compare only one percentage or commit to fixed accuracy rates without baselines and a statistical calibration. The baseline is recorded before the pilot, the same range is used after the line is online and the same caliber is repeated, so that the results are comparable.

Scanning and RFID have borders: the way they are collected by cargo and process

The advantage of bar codes is that they are cost-controlled, identify the target clearly and the results on site are easily identifiable by people; but there is usually a need to match labels, goods are shielded, labels deface and repeated operations increase the operational burden. RFID can read multiple electronic labels under certain conditions without contact, suitable for pallets, swing boxes or points of intersections requiring batch recognition; the actual reading effects are subject to label type, installation location, metal and liquid environment, antenna layout, channel structure and adjacent label interference. It is not a guarantee that "any direction will read" or "no door will ever leak".

The selection should be based on a combination of operations nodes, rather than an effort to use only one technology. For example, the receiving point can assess RFID doors or handheld devices, mounts, selecting links that require accurate identification of the repository position, review of equipment tasks and people, and keep bar codes or manual access for goods not covered by the anomaly and labels. If there are multiple jobs in the vicinity of the same channel, the system should also verify how the label is found to belong to the file and avoid mislabelling the adjacent area into the current tray.

The key to the RFID landing: labels, physical and inventory master data match

Each RFID label requires a clear business binding relationship. It is common to map tags like the EPC to tray, turnbox, material or batch records and to provide for tags to be reissued, rewritten, untie, decomposing and duplicated binding rules. Label encoding is not a complete inventory file; name of the material, batch, owner, validity and quantity should remain loaded with primary data and documentation in the operating system. If the label is placed on an error-in-kind, reader will only pick up the misconnected more quickly if it is read correctly.

The WMS should distinguish between “read to label” “forming a valid business event” and “stock document overdraft”, and preserve the original readings, equipment number, antenna or area, time, associated tasks and processing results. Repeated reading requires filtering or tweaking by operational rules; it cannot simply add up every EPC report to inventory. For leaking, unknown tags, duplicate labels, read-area conflicts and network disruptions, review missions, manual retrying or retry mechanisms, and retention of processors and processing times.

Focus on the four-tier capability when assessing WMS

The reconciliation is the result of a combination of equipment, data, rules and personnel processes. The presentation can be cross-examined around the following four layers and requires that the vendor displays the process in close proximity to the actual warehouse rather than just playing standard functionality videos.

Collection level:Can the system connect to a fixed type of reader, handheld or doorcase? Devices are broken down, read over, unknown EPC and some labels are not read, how does the interface point, can operators review them on site? The docking protocol, the equipment model and parts that need customisation are clearly listed?

Inventory and documentation level:Receipt, quality check, waiting to be put on the shelf, available stock, freeze inventory, how are stocks allocated and in transit defined? Under what conditions does RFID collect a record of receipt or transfer, who has the authority to confirm or cancel? Does the system produce duplicate inventory when documents are submitted again? Require suppliers to trace events from their original reading back to the final stock change.

Process and anomaly layer:Up-store collages do not match, task cancelled, tag broken, device offline, readable area identifies other trays at the same time, how is the mission suspended, roll back or transfer manual processing? Is the anomaly responsible for people, state, processing time frames and audit logs? Can the system be restored to recognize uncompleted tasks instead of blindly duplicated implementation?

Inventory and analysis layer:Do you support the use of library, material, batch, cargo owner or container inventory, with blind and double-discs rules? Can the difference relate to specific repository, moving library, selecting and out-of-pool events? Can the report export a breakdown for review rather than just an aggregate accuracy rate?

Opposing the same set of scenes: transforming the publicity function into evidence of acceptance

The candidate system should use the same set of model data and test steps. First, a representative region or class of goods should be selected, with a known number of pallets, boxes and labels prepared, and normal and unusual operations designed. Recording the completion time of the home-to-house, manual interventions, the results of the disposal of missing and read-over, inventory changes, whether the audit log is complete and if the outstanding tasks will continue after recovery. Time and accuracy targets should be determined on the basis of existing baselines, field-based beats and business risks, and not directly replicating the value of commitments from other warehouses or suppliers.

Assessment On-site validation method - I'll be clear when I check.
Tab binding Checking the tags for the pallet, material, batch, simulating the mist and untie Monochrome rules, error clearances and operation marks
Read Effect Test different locations, speed and adjacent cargo with physical packaging and placement Sample range, missing/misread definition and review process
Inventory Check how a valid event relates to the documentation and changes the stock status Rules, conditions of payment and mechanisms for revocation
Unusual closed circle Simulate duplicate tags, unknown tabs, readers' break-up and job interruption Alert, manual takeover, retest and recovery results
Inventory analysis Follow-up of original business events from differences on selected library slot blind disks Indicator formulae, sample calibre and detailed traceability
Operation maintenance Viewing devices online, backlogs of incidents, failed missions and log calls Control responsibility, backup recovery and problem response to border

The comparison findings are best made by retaining test records, interface lists, equipment lists and non-compliant items, and converting them into contract or project acceptance clauses. When asking the case, the type of warehouse, cargo material, labelling schemes, statistical cycles and indicator definitions; "accuracy rate" or efficiency figures without these backgrounds are not suitable as a basis for selection. The live presentation also looks at abnormal paths, and the system displays only the mainstream path of successful completion, which does not indicate its availability in real fluctuations.

On-line strategy: pilot, parallel checks before scaling up

The first thing you can do is to organize material, batches, store places, packagings and labels, clean up duplicate or missing data, and select a pilot range that will cover the main operation. During the pilot period, bar code or old process can be used as a clear downgrade channel; every day, when compared with old and new collection results, differences are located to labels, devices, worksheets or system rules. Only when unusual processes are processed, personnel training, equipment maintenance and data roll-back processes are validated, and coverage is gradually expanded.

The test drive answers the question: error is mainly from the area design, tag binding, business document time series or on-site operation? What differences are automatically repaired and must be confirmed by people? Does the system leave a full audit chain? Close these questions one by one, more than simply pursuing a pretty accuracy rate to indicate whether WMS is suitable for long run.

Which one is good for the warehouse management system: based on on site validation and long-term traceability

The choice of "good" does not have a uniform answer to the operational conditions. Whether or not goods are suitable for labelling, whether bulk transfer is required, how existing ERPs work together, who maintains the equipment and who handles the anomalies, affects the program. Priority is given to systems that clearly describe data models, fit the equipment borders, abnormal closed loops and calibrations, and are willing to complete validation according to actual scenes; also requires written identification of unsupported capabilities and additional developments.

Before starting the procurement comparison, you can sort inventory differences for a certain period of time, by class, store space and business nodes, and select a complete delivery to the shipping process as a demonstration script. The conclusions thus obtained are directly relevant to the warehouse problem and facilitate subsequent project acceptance and continuous improvement.