Laundry tag RFID installation and use tutorials: the right operation can be of maximum value
RFID Knowledge

Laundry tag RFID installation and use tutorials: the right operation can be of maximum value

PublishedShanghai Zejie Smart Technology Co., Ltd.

Laundry tag RFID installation and use tutorial: the right operation is to be of value...

When installing and using laundry labels RFID, the standard operation is key to ensuring that they read stability and extend their useful life. The correct operational method is used to value it in a chemical manner. The following is a specific process: pre-installation preparation: ... the proper label should be selected according to the material of the clothing. For example, light clothes should choose flexible tags, while heavy fabrics should select durable labels. At the same time, tools are ready for installation, stitching labels need needles or sewing machines, while stickers need to ensure that fabric surfaces are dry and clean, avoiding oil pollution affecting viscocetity. In addition, the early inclusion of basic information (e.g. fabric number, area) in the label will facilitate subsequent reading and identification. Specific installation steps: different types of installation are used for clothing of different materials. For light clothing (e.g. bedsheets, medical suits), the tag can be sewn to the edge of the edge, with a needle-foot spacing between 0.5-1cm, and no typographical areas; heavy fabric (e.g. jacket, curtain) is suitable for sticky labelling, tearing out the reel protection film, and putting it on the side of the fabric without wrinkled ground, and press 30 seconds to ensure that it is solid. If the clothing has a pocket, you can also place the label in an entrance bag and sew the seal to prevent it from falling when washing. After installation is completed, check if the label is flat or not reaching the bumps, and avoid the risk of placing other clothes on the edges during washing. Attention at use: During washing, make sure that the label is not shielded by metal items (e.g. far from zipping, button) so as not to affect signal reading; control temperature within the acceptable range of the label (usually not exceeding 100°C); periodically check the status of the label, and should be re-established in time if the stitches are found loose or the glue is removed; When you read a label, keep the distance between a card reader and a label at 0.5-3 metres and avoid a high-lighted straight-shot card reader to ensure that the data is read in an accurate manner. Through the above steps, it is effective to ensure proper use and long-term utility of the laundry tag RFID.