Double-frequency RFID is the best way to get in and out.
Single frequencyRFIDUsually it's a single-band type of work.RFIDTechnology, common 2.4G and 900MHZ and 433 MHz, the main thing we're going to say today is that it's a source.RFIDThe application of the system, therefore UHF etc. are not part of the discussion.
Fifteen years ago, it was a source.RFIDThe most used in the field of positioning was when people were called, vehicles counted, materials stolen and their use generated by them was probably not greater than they themselves.RFIDThe areas of identification of delegates, such as the arrival of money-cargoing vehicles in banks, bus arrivals (BRTs are more common), inventory of secret assets in warehouses, etc.
Then, as the demand for location services grew and demand grew, radio frequency technologies like WIFI, ZIGEE, Bluetooth were developed and applied, so that it was simple single frequency.RFIDIt's no longer possible to compare the location field with other radio frequency technologies, and some of them started to double-frequency.RFID。
So-called double frequency.RFIDAnd the same radio frequency module has two bands, the most common being 2.4G and 125K, and 433MHZ and 125K. 125K as a low frequency.RFIDThe most important feature is that the reading distance is short, depending on the antennas that are assembled, different distances, ranging from 3 to 10 metres, and 125K is recognized as active, not in the activation area, which is not activated, and the most popular one in the market is open to a car, and the key to the car is a 125K low-frequency label.
It starts with a double frequency.RFIDIt's to compete with other radio frequency technologies for regional positioning, but then more and more in the industry, it turns out that his activation area borders are clear, not disturbed by the environment, and that the application of low-frequency technology can increase the time spent on hibernation, although other radio-frequency technologies have low power, but they can't save much less than the restive electricity. That's because the low-frequency 125K has a good point of being clear, so he can achieve very well the need for access.
For example, how a vehicle gets to the gate and starts to identify is usually a geosensor circle, why other technologies can be done, but eventually a geosensitosphere ring? Because he's cheap, and he's hardly wrong. The same thing in the double-frequency field, people or materials get into low-frequency activation zones, but even though he cannot do it with high precision, regional control is very accurate, and the result is that it can achieve perfect access. And access, which is important in the location industry, for example, material access, personnel access, children go to school, secret assets leave the room, etc.
In summary, low frequency is almost the most appropriate technology in access, but because of its short distance, it must be combined with a module that can communicate remotely and also allow for a vague location from a distance, so double frequencyRFIDAnd it's natural. On this basis, we have developed and released a dual-frequency-based regional positioning system, the greatest advantage of which is that access to various target audiences can be successfully addressed.
Fifteen years ago, it was a source.RFIDThe most used in the field of positioning was when people were called, vehicles counted, materials stolen and their use generated by them was probably not greater than they themselves.RFIDThe areas of identification of delegates, such as the arrival of money-cargoing vehicles in banks, bus arrivals (BRTs are more common), inventory of secret assets in warehouses, etc.
Then, as the demand for location services grew and demand grew, radio frequency technologies like WIFI, ZIGEE, Bluetooth were developed and applied, so that it was simple single frequency.RFIDIt's no longer possible to compare the location field with other radio frequency technologies, and some of them started to double-frequency.RFID。
So-called double frequency.RFIDAnd the same radio frequency module has two bands, the most common being 2.4G and 125K, and 433MHZ and 125K. 125K as a low frequency.RFIDThe most important feature is that the reading distance is short, depending on the antennas that are assembled, different distances, ranging from 3 to 10 metres, and 125K is recognized as active, not in the activation area, which is not activated, and the most popular one in the market is open to a car, and the key to the car is a 125K low-frequency label.
It starts with a double frequency.RFIDIt's to compete with other radio frequency technologies for regional positioning, but then more and more in the industry, it turns out that his activation area borders are clear, not disturbed by the environment, and that the application of low-frequency technology can increase the time spent on hibernation, although other radio-frequency technologies have low power, but they can't save much less than the restive electricity. That's because the low-frequency 125K has a good point of being clear, so he can achieve very well the need for access.
For example, how a vehicle gets to the gate and starts to identify is usually a geosensor circle, why other technologies can be done, but eventually a geosensitosphere ring? Because he's cheap, and he's hardly wrong. The same thing in the double-frequency field, people or materials get into low-frequency activation zones, but even though he cannot do it with high precision, regional control is very accurate, and the result is that it can achieve perfect access. And access, which is important in the location industry, for example, material access, personnel access, children go to school, secret assets leave the room, etc.
In summary, low frequency is almost the most appropriate technology in access, but because of its short distance, it must be combined with a module that can communicate remotely and also allow for a vague location from a distance, so double frequencyRFIDAnd it's natural. On this basis, we have developed and released a dual-frequency-based regional positioning system, the greatest advantage of which is that access to various target audiences can be successfully addressed.

Ms. Lei
Mr. Pang