RFID Distinction and Link between Origin and Invisibility
The difference between source and non-source of RFID cannot be simply summed up as being close.
When comparing technology, separate frequency bands and working methods
Low-frequency, high-frequency (HF) and UHF-temperature work bands, which provide a live and passive description of power supply and communications, are not the same axes of classification. High-frequency (HF) proximity couplings with common UHF remote systems have different characteristics in terms of distance, labeling attitude and material impact; it is also possible that the same frequency segment equipment may not be interoperable because of different agreements.
Sources and non-sources should be compromised by maintenance and information timeliness
The passive programme relies on the site reading point to provide working conditions, and the active programme requires the management of batteries or other electricity.
The presence of batteries does not necessarily mean that there are location coordinates, nor is the absence of batteries equal to being identified in close proximity.
The active system needs to consider battery replacement and failure detection, and the passive system needs to verify each read-out supply chain. The two types of maintenance cost distribution differ. The choice should be more time-sensitive, covering conditions and long-term workloads than simply considering power capacity as performance level.
Put this in a specific process.
When a group of active labels are close to low power, maintenance may create a concentrated burden; the passive solution may focus on maintenance at fixed reading points. The costs of the two systems vary. Compare the total cost of ownership, it should cover the full life cycle, not just initial purchase.
It's by the same mandate that you can draw comparable conclusions.
When a single project is tested, another whole box is tested; one allows manual organization of the direction and the other is simply stacked at random, the result cannot be attributed directly to the type of technology. For tasks that require a controlled authorization, the consequences should also be identified by error and the way they are recovered. The choice is not usually to look for the strongest of all indicators, but to find a combination that is acceptable in total costs and can be handled with anomalies once the necessary conditions have been met.
Let's look at the input and the results.
| Observation dimensions | Evidence to be retained |
|---|---|
| Agreement. | Checking protocols and commands outside of the same frequency. |
| Mission fit. | Individual confirmation and batch count evaluation separately |
| Deployment costs | Tags, reading points, software and maintenance consolidated accounting |
| This is the key trade-off. | Are you willing to take on more reading site deployments or are you willing to take on the power and maintenance that is scattered over each item? |
It's recommended that this be verified.
Tests of power reduction, loss of reading points and prolonged non-observation check how the system expresses unknown status.
The ICP uses the same objects, the same placements and operating time windows for candidate equipment.
It's worth asking.
Are you willing to take on more reading site deployments or are you willing to take on the power and maintenance that is scattered over each item?

Ms. Lei
Mr. Pang