Strategic analysis of RFID technology in car mains
The successful application of RFID technology to car assembly lines requires consideration of both the technical feasibility and management aspects. This subsection therefore focuses on analysisRFIDTechnology application strategy for vehicle assembly.
(i) Implementation of RFID technology in car mains
First, on the RFID-based car assembly line, the RFID label is placed on the tray that carries the vehicle and can be moved with it, so that a database can be created, which can move along with it, and the assembly line can be installed and assembled in appropriate locations according to the needs of the enterprise ' s production management and assembly process, while ensuring the accuracy of the assembly.
Second, to enable the reader to read the information in the label as quickly and efficiently as possible, it should be made as well as reasonably applicable, only required, so the coding should be as simple as possible and avoid excessive. In order to manage the reader 's coding, the reader 's coding should be combined with the workshop where the reader is located, the workspace information. The label installed on the tray has a much larger capacity than the barcode, but its capacity is still limited and it is not too long.
And when there is too much information stored in the label, the speed of reading and writing will be affected, so the information in the label should not contain assembly information, but rather should be obtained by coding the reader to locate the vehicle's configuration information, tag encoding and industrial information.
Finally, because the trend for vehicles to evolve over time is more personalized and of higher quality, the assembly line must avoid all forms of misassembly, so in order to test the correctness of the assembly, in addition to having a reading/writing device on key positions, it should also be equipped with an aided reader to help assemble workers identify critical parts.
(ii) Management specifications for RFID technology in car mains
First, the assembler should ensure that when a label is not read, it is not mixed with metal products or other objects that have an impact on the reading of the label, because this has some effect on the reader's reading label and even leads to failure. Second, the key parts should be kept within the work of the primary writer, since this leads to failure in reading the car label due to misreading the parts' label. Finally, staff are not allowed to carry mobile phones, communication devices like Bluetooth into the workshop where RFID is deployed because of the wireless signals and various electromagnetic waves that are sent by these devices which interfere with the normal work of the readers.
(i) Implementation of RFID technology in car mains
First, on the RFID-based car assembly line, the RFID label is placed on the tray that carries the vehicle and can be moved with it, so that a database can be created, which can move along with it, and the assembly line can be installed and assembled in appropriate locations according to the needs of the enterprise ' s production management and assembly process, while ensuring the accuracy of the assembly.
Second, to enable the reader to read the information in the label as quickly and efficiently as possible, it should be made as well as reasonably applicable, only required, so the coding should be as simple as possible and avoid excessive. In order to manage the reader 's coding, the reader 's coding should be combined with the workshop where the reader is located, the workspace information. The label installed on the tray has a much larger capacity than the barcode, but its capacity is still limited and it is not too long.
And when there is too much information stored in the label, the speed of reading and writing will be affected, so the information in the label should not contain assembly information, but rather should be obtained by coding the reader to locate the vehicle's configuration information, tag encoding and industrial information.
Finally, because the trend for vehicles to evolve over time is more personalized and of higher quality, the assembly line must avoid all forms of misassembly, so in order to test the correctness of the assembly, in addition to having a reading/writing device on key positions, it should also be equipped with an aided reader to help assemble workers identify critical parts.
(ii) Management specifications for RFID technology in car mains
First, the assembler should ensure that when a label is not read, it is not mixed with metal products or other objects that have an impact on the reading of the label, because this has some effect on the reader's reading label and even leads to failure. Second, the key parts should be kept within the work of the primary writer, since this leads to failure in reading the car label due to misreading the parts' label. Finally, staff are not allowed to carry mobile phones, communication devices like Bluetooth into the workshop where RFID is deployed because of the wireless signals and various electromagnetic waves that are sent by these devices which interfere with the normal work of the readers.

Ms. Lei
Mr. Pang