Detailed comparison of low-frequency, high-frequency (HF), UHF, active technology in RFID radio frequency technology
Industry News

Detailed comparison of low-frequency, high-frequency (HF), UHF, active technology in RFID radio frequency technology

PublishedShanghai Zejie Smart Technology Co., Ltd.

Low-frequency, high-frequency, UHF and active technologies often appear in a comparative table, but the first three are classified by frequency bands and the last one by electricity mode. This logical difference will influence the overall selection discussion.

Don't put four labels in a good or bad sequence.

Distance, label number, update cycle and maintenance capacity should be considered as independent needs.

Longer coverage may result in a blurring of regional boundaries, and closer interaction may increase operational action. Such costs should be written into the design rather than directly considering distance as good or bad.

The comparison should also indicate the mode and frequency of supply. It is not a given aliases for a fixed frequency, nor does it mean that all labels read each other. First, the frequency, maintenance conditions and reading areas are clearly updated, then the system is discussed to avoid the vagueness of the procurement documents.

How do border conditions change the conclusion?

Assuming that one option is more extensive, it requires a large number of batteries to be replaced frequently; another requires more fixed reading points, but less end-of-use maintenance. Both total costs vary with the number of items, moving range and life duration. Without these inputs, a separate "farer" conclusion cannot support investment decisions.

It's recommended that this be verified.

Organizational candidates are identified on a single piece, as bulk counts, as regional appearances and as continuous positioning, identifying the unknown status allowed for each task.

The ICP uses the same objects, the same placements and operating time windows for candidate equipment.

When comparing technology, separate frequency bands and working methods

Low-frequency, high-frequency (HF) and UHF-temperature work bands, which provide a live and passive description of power supply and communications, are not the same axes of classification. High-frequency (HF) proximity couplings with common UHF remote systems have different characteristics in terms of distance, labeling attitude and material impact; it is also possible that the same frequency segment equipment may not be interoperable because of different agreements.

It's by the same mandate that you can draw comparable conclusions.

When a single project is tested, another whole box is tested; one allows manual organization of the direction and the other is simply stacked at random, the result cannot be attributed directly to the type of technology. For tasks that require a controlled authorization, the consequences should also be identified by error and the way they are recovered. The choice is not usually to look for the strongest of all indicators, but to find a combination that is acceptable in total costs and can be handled with anomalies once the necessary conditions have been met.

Don't just look at the successful samples.

Observation dimensions Evidence to be retained
Agreement. Checking protocols and commands outside of the same frequency.
Mission fit. Individual confirmation and batch count evaluation separately
Deployment costs Tags, reading points, software and maintenance consolidated accounting
This is the key trade-off. Is it a wireless technology or is it an operational mechanism that contains rules for power supply, maintenance and operation?

It's worth asking.

Is it a wireless technology or is it an operational mechanism that contains rules for power supply, maintenance and operation?

Technical and factual references