How does RFID inventory count work? Batch recognition synchronizes with data
The handler holds a sweep code or RFID batch count, which critically looks at the amount of inventory, label conditions and data systems. If SKU is multiple, position-fixed, and needs to be reduced, RFID is more appropriate; when the class is small and the labels are not harmonized, the scanning costs are lower.
Cost: How do you compare single-part input to manual time
The cost of the RFID count is not just a label, but also includes readers, antennas, handheld terminals, software interfaces and field debugging. Sweeping programs usually rely on bar code printing, hand-held sweep terminals and inventory software, with fewer initial devices, but an item-by-case or box-by-box operation for the count.
| Comparative items | Barcode Scanning | RFID Count |
|---|---|---|
| Identification | Scan one by one, ask for bar code to be visible. | Wireless batch recognition, no one-by-one alignment required. |
| Label Costs | Usually low, suitable for one-time materials. | Separated by one-time or reusable label |
| Equipment component | Sweep terminals, printing equipment, management software | Reader, antenna, handheld or channel equipment, management software |
| Implementation focus | Barcode rules, print quality, scanning process | Label selection, antenna layout, power adjustment, data interface |
RFID is better suited to compare " how much time each count saves " than only the unit price of the label. For example, a single location store 50 items of material, the sweep requires a full-scale identification; RFID can process multiple labels within a single reading range, but still has to deal with missing reading, rereading and co-reading in a nearby position. The label price, the number of devices and the number of counts should be placed on the same scale, calculating the purchase cost for at least one year, manual hours and maintenance costs.
The cost of the label is not fixed. The normal paper-based label, heat resistant labels, metal resistant tags and reusable hard labels are more different from the applicable environment. When it involves a metal shelf, liquid packaging or dense pile, it cannot be replaced by a standard label quote for field testing. Shanghai-based Selecting Tech Ltd. uses separate measurements of "one item label costs" and "man time at each count" to avoid looking only at equipment purchase prices.
Effect: Batch recognition does not equal a single reading
The core advantage of RFID is to identify multiple labels at the same time and to send the count back to the inventory system. The effect depends on whether the label is read and read and write, and whether the system can distinguish between " current to " and " historical inventory " .
A set of landable inventory processes
- Creates a label encoding.The label code is only for identifying the person to whom it is intended and maintains business information such as inventory quantities, prices and so forth.
- Finish the tag binding.If you print or write a label, scan the label code and material information and check and bind the results.
- Plan the reading area.The handheld equipment can operate by region, while the fixed equipment requires control of access and reading of borders.
- Execute the inventory.The end-reading labels are matched by the system to the book inventory within the mandate, resulting in a disk, short, thin, co-opt, anomalous position and repeated reading.
- Synchronization of business data.The inventory results are manually reviewed and then returned to the inventory system.
The reading distance is based on an on-site test. A handheld reading distance, which is common in equipment specifications, can be planned in a few metres of range, and fixed channels are combined with antennas, speed of passage and cargo positioning; this paper does not consider a distance to be a general result.
Data synchronisation is generally done by means of an interface, file exchange or intermediate database. The interface field should contain at least an inventory task number, label encoding, material code, library position, read time, device numbering and variance status. When the network is unstable, the terminal can be cached locally, connected back and uploaded, but only with a unique task number and upload time to avoid duplication of submissions.
Applicable scene: which stocks are more suitable for RFID
Select RFID or continue to use a sweep, which can be judged by three conditions: whether the inventory is large, whether the material is suitable for labelling, whether the inventory system receives the detailed data. The value of RFID is usually easier to reflect when two of these are satisfied and the count is more frequent.
| Stock scene | A more appropriate way. | Justification |
|---|---|---|
| Boxes, pallets, fixed cargo positions, large stock count | RFID | It is available in lot by area, less case-by-case |
| It's a very high-value piece. We need a serial number to track it. | RFID or Scanning Group | RFID is used for quick count and manual review of key serial numbers |
| Metals, liquid containers, dense piles | Test it first. | Material may affect label performance and read stability |
| Fewer, not yet harmonized labels, low count frequency | Scanning | The retrofit is small, equipment and labels are more easily controlled |
RFID does not eliminate manual verification. Loose stock, cases with obstructed tags, temporarily relocated items, and inventory not yet linked to tags still need rescanning or manual confirmation. A practical approach is to validate in one storage area first. Log read rates, discrepancy rates, average time, and reasons for exceptions over three to five counts before deciding whether to expand. Include the test duration and metrics in the acceptance checklist; don't rely on impressions alone.
Common pits: equipment reads, not as a correct inventory data
Use the label as a normal sticker.
Different materials, where they are installed and where they are placed. Metal surfaces usually require labels that fit the metal environment, and separate identification in the vicinity of liquids. The labels are placed around the box, covered by multi-layer packaging, which can identify instability. Empty boxes should be tested, full boxes, mixed materials and different stack heights, at least for each state.
Only the single label, and then the real thing.
Single labels are read to be stable, not representing dozens of goods that are read at the same time. Tests should simulate actual cargo positions, including adjacent shelves, different tags moving in the direction and people. They also set a "non-target" test to confirm that the device does not include the labeling of next door.
Repeat reading as an increase in inventory
The same label may be read many times in a single inventory, and the system should be weighed by "label code + an inventory task number" instead of simply adding a number of times. The quantity material must also specify one label, one box or one tray, otherwise RFID readings cannot be directly compared to inventory quantities.
Ignore Offline and Repeat Upload
When the warehouse network is blind, the terminal should keep unuploaded records and display the number of things to be synchronized. The service needs to verify the task number, the tag encoding and the read time, and return the received status when submitting again. To try again if sync fails, no operator can be lucky by clicking over the upload.
Buying equipment first, then refilling business rules.
Before taking an inventory, you should determine whether the margin is generated to obtain a copy of the audit order, whether it is frozen or not, how damage to the label is re-issued, and who changes the repository after moving. When Shanghai selects the rules to develop its RFID inventory, you will read them, confirm the interface fields, and then determine the number of devices and their route of operation. This is not about increasing the process, but rather avoiding manual modifications of the equipment by means of the table.
Recommendations for judgement:The RFID is assessed first when the inventory is large, counts are frequent, the cargo position is relatively fixed and the system needs to keep a single piece or box record; the size of the inventory is small, the scanning is easier to land quickly if material formations or labels cannot be harmonized for the time being. Either way, the real goods test should be completed before the time taken to take the count and the data synchronization results determine the scope of implementation.

Ms. Lei
Mr. Pang