What are the RFID fixed assets? Management and inventory applications
At the end of last year, an electronics factory ran its annual asset inventory. The finance, administration, IT departments had a dozen people, and they had a few days of a thousand pieces of equipment and office assets. The leak, the misdirection, the rediscovery data were finally going to take another week to check. The director of the plant read the report and said, "Can we stop using human tactics next year?"
And then they put all their assets on RFID labels (radio frequency recognition, in short a technology that uses radio wave to identify chip information), and changed a digital management system. The second count, four people, two days, was done, the difference rate went from the previous year's high to a thousand percent. The whole "whatever, how" process was also re-engineered.
This article follows this scene and explains the scope, process and inventory application of RFID ' s fixed asset management.
What exactly does RFID fixed assets control?
Many people just think about IT equipment like computers, servers and so on. In fact, RFID can run a much wider range than you think.
- IT Info ClassDesktops, notebooks, servers, printers, network switches, projectors, surveillance cameras.
- Production equipment classMachinebeds, retrofitters, detection instruments, PLC control cabinets, water-lined posts.
- Office furniture categoryTables, conference tables, document cabinets, shelf, air conditioners, water-water machines.
- Transport and handlingForklifts, manual hydraulic vehicles, carts, swing tanks, pallets.
- Tool instrument typeHand-held oscilloscope, universal watch, card size, special treatment, test kit.
- Assets subject to retroactive: Some enterprises will also include assets that are low but important (e.g., precious molds, samples) for unit prices.
The two criteria for determining whether to include a thing in RFID management are: first, that the standard of accounting for an enterprise's fixed assets is met or close to the level of the amount, and second, that there is a tendency to change position during daily use, by borrowing the risk of return or loss. If you remain in a fixed position for a long time, it is almost unmoveable and worthless, and the input output of integration is less than that of management.
Give each asset an "electronic ID."
The first step in the management of fixed assets by RFID is to tie together physical assets and system data. This appears to be a simple matter, with considerable detail.
First of all,Select Tab. The plain paper RFID label is cheap, suitable for a file cabinet, and non-metal surfaces such as wood desktops; but the server cabinet, the shell of the machine, which shields signals, must use anti-metallic labels. More commonly, the UHF metal tags are more than universal, reading distance can be stable at 5-8 meters, and handheld PDAs can sweep one piece at a time.
And then...Paste Location. Keep tags away from high temperatures, areas likely to be scraped, and places that collect oil. A common practice is to attach the RFID tag to a flat part of the housing or the back of the equipment and put a printed QR code next to it. That way, if the RFID reader fails, the code can still be scanned to look up the asset.
And finally,System binding. Each label is posted before you can record the asset, enter the name of the asset, encode it, purchase the date, original value, use the department, store the location, responsible person, etc. The tag is then written in a reader, and the tag ID and the asset number is matched, this step is "Initiation".
Initial data entry is the most time-consuming part. Two thousand assets, two people working with the complete set of labels and initializations, take about a week to ten days. When Shanghai's technology sets up projects like this, it usually takes a solid inventory and coding of assets, then a batch label, and a bulk import system. This part is ready for start-up, and then it goes much better.
Day management: Let the asset " speak for itself"
The label is just the beginning. The hardest thing about fixed assets is "process," that is, transfer, repair, idle, loss of assets between inventory and end-of-life.
Add & & AccessNew equipment is marked, coded, system-encumbered, user and storage space assigned, fully operated on PDA and completed within half an hour.
Redeployment and transfer: Previously, assets were moved from Workshop A to Workshop B to fill out the forms, sign, reposition IT information, and then make two or three days of a change. After using RFID, scan tags, select new positions, identify responsible persons, update systems in real time, and do not last more than one minute.
Maintenance and change of statusThe device is marked as "maintenance" and then returned to the system with a full status change record. Who did what at what time, it's traceable.
I'm warning you.The system is effective in controlling valuable equipment and preventing internal leakages.
Take a look at the sequence: From "Man's Battle" to "Sweep Up."
The inventory is the most visible part of the proceeds of RFID’s fixed asset management.
Handheld PDA countMost commonly used, lowest cost. The inventory operator takes the PDA around the area and the PDA sends a continuous signal, and the nearby label is automatically read and uploaded to the system. A performance-based industrial PDA can read 200 to 300 labels per second, and a 30-position office can be cleaned up in minutes.
Fixed Channel CountThis is a suitable way to monitor the dynamic of large items or batches, such as medical equipment companies, and third-party testing laboratories.
RFID Counting Robot. Some large warehouses and server rooms use wheeled robots equipped with readers to follow fixed routes and take inventory without staff involvement. Upfront costs are higher, but companies with more than 10,000 assets can save money in the long run.
The inventory process is not complicated per se: start an inventory mission in the system to set up the asset range, area, time; take the inventory officer with PDA and sweep it on site; automatically return the data from the PDA to the system, compare the systems and accounts, and separate items of difference; and finally manually review the differences to confirm whether the leak was a disk or whether it was lost.
Change after use
Back to the scene, after going into the RFID system, the factory itself summarized a few changes: the count cycle went from once a year to once a quarter, each time running from five days to two days; the difference in accounts fell from a few percent to a few thousand points, almost only when it was added or scrapped; and last year, two test instruments tried to get out of the plant door, and the system called the police that day, and the doorman stopped.
More important changes are the data themselves. Depreciation calculations, end-of-life disposals, and annual audits, which would have depended on departmental reconciliations, now require direct filing of statements in the system, with a significant reduction in the cost of communication between finance and audit.
If you have a thousand assets, spread across regions, and have a daily loan, the efficiency gains from RFID fixed asset management are real. The key is to get an inventory and code of prior-period assets solid, labels right, systems right, and then things go well.

Ms. Lei
Mr. Pang