RFID tag-aided robots are located in milliseconds.
Industry News

RFID tag-aided robots are located in milliseconds.

PublishedShanghai Zejie Smart Technology Co., Ltd.

RFID helps robotics to identify workspaces or ground markings is a negotiable option, but "finding position in milliseconds" cannot be separated from equipment, trajectory and control systems.

The milliseconds of recognition are not equal to the milliseconds that complete their position.

The robot knows that it passes through a mark, and knows how to keep up position, attitude and barriers.

The normal RFID reading point should not be held liable for avoidance or functional safety.

The discrete tag provides evidence of a place where the position between readings is still to be filled with other information. It should indicate how the drop-down after the omission of the sign and the duplicate marking are handled. Write instantaneous communication speed directly into navigational capability, concealing the true burden on the control system.

Identification, regional presence and continuous positioning are not the same thing.

A RFID reading point is recognized, which usually provides a clue to the area covered by the reading point; it does not naturally give continuous coordinates. If a programme needs to locate, a separate definition of positioning technology, cover design, update cycle and shielding conditions should be provided, so that the read distance cannot be converted directly to position accuracy.

Location should include time limits and uncertainty

A location result that does not indicate when, by what device and to what extent it is credible may give the impression that users are over-defined. The end result is a region, currently estimated area, and precise coordinates should be expressed differently. In the absence of a new event, the system should be less certain or alert to verification rather than an unlimited extension of the old position. This is particularly true for loss prevention and human services: older but accurate icons may be more misleading to follow up than simply specifying the last reading point.

Re-examine the programme from an exception

You can divide robots from tag to action. Even if they are read very quickly, the message queue or control cycle may dominate the total delay. Only by means of end-to-end measurements can you judge which link is described in "a few milliseconds" and whether it is meaningful for the mission's outcome.

Put your judgment in the real situation.

Recording of the periods between marking and the entry into force of control instructions, arranging for deviations, leakages and duplicate markings to verify whether robots remain safe.

It is suggested that the answer should be “whether or not” through “the current area” or “continuous coordinates.” Using a genuine entry route, blind areas, multiple persons or objects are tested for blockage, stopover and reverse movement before assessing whether operations will accept uncertainty.

From demonstration to delivery, what evidence is needed

Observation dimensions Evidence to be retained
Space syntax Use different fields for reading points, areas and coordinates
Update the statute of limitations The event was measured separately from the delay shown in the interface
Misreporting and disposal No new observations should not simply be interpreted as leaving
This is the key trade-off. Would the faster identification of a sign really solve the uncertainty of robots' positioning between two signages?

It's worth asking.

Would the faster identification of a sign really solve the uncertainty of robots' positioning between two signages?

Technical and factual references