RFID tags can detect food contamination/diversion?
Industry News

RFID tags can detect food contamination/diversion?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The RFID label is a research proposition that requires qualification.

Food contamination detection requires a dedicated sensor link.

Research has explored the use of radio-frequency response changes to identify food status, but experimental conditions, training data and target audiences determine the boundaries. The results cannot be translated directly into all foods, all packagings, and commercial commitments.

Changes in communications may also come from differences in location, humidity or packaging.

Food testing requires that the sensor response be linked to a real contamination indicator. Humidity, temperature and packaging changes can affect signals, so you should use independent testing to calibrate. The normal identity label numbers do not indicate food safety, nor does research prototypes equal household generic detectors.

Retroactive, thermostatic and judgmental food safety are different capabilities

If you want to obtain data such as temperature, you need the corresponding sensor components and collection conditions.

Write out the reasoning between information records and quality judgements.

From label identity to food findings, there may be a batch of linkages, environmental records, data calibration and determination models that are applicable at every step. The external measurement of packaging does not necessarily represent the internal state, nor does the complete recording of the process mean that each input is true. The programme should disclose what it has obtained directly and what conclusions depend on additional assumptions. It is recommended to retain the missing data and the situation beyond the model, moving to an application test if necessary, rather than imposing them in order to give the user a simple answer.

An easily ignored reversal.

If the food package is changed by wireless response after the location of the food package has moved, and the system still interprets the change as contamination, it may be misreported. The pollution detection test must match the environment to the packaging and use independent tests to confirm that the label responds to the target state, otherwise no cause or effect can be explained.

Put your judgment in the real situation.

The control samples, changes in packaging and environmental interference are included in the validation and judged using applicable inspection methods rather than just more wireless signals.

It is recommended that identification checks, environmental data and quality determinations be separately validated.

Don't just look at the successful samples.

Observation dimensions Evidence to be retained
Retrospective Particle Degree Clear relationship between individual goods, containers and batches
Data is credible. Sources, calibration and sampling intervals are available
Limits of liability Recording or early warning is not a substitute for formal quality determination
This is the key trade-off. Does the system's “unusual” mean that food is deforming or simply that measurement conditions have changed?

It's worth asking.

Does the system's “unusual” mean that food is deforming or simply that measurement conditions have changed?

Technical and factual references