Price of RFID label processing equipment
Industry News

Price of RFID label processing equipment

PublishedShanghai Zejie Smart Technology Co., Ltd.

The price of RFID label processing equipment cannot be compared with the product structure.

The processing equipment quotations should be accounted for as a qualified output.

The nominal speed is not necessarily suitable for multi-species orders if it only applies to long periods of continuous production.

The purchase price may be accompanied by the cost of consumables, moulds and commissioning; a high price does not guarantee that the process is fit.

The energy should be measured by the end-of-life product, not by the speed at which the material passes through the machine. Switching, cutting and retrofitting change the effective output.

Manufacturing quality requires evidence in the process.

A sample can read a number, but only indicates the success of this reading and cannot substitute for validation of power abundance, durability and batch consistency.

Process distribution is of more diagnostic value than individual qualified findings

When performance moves closer to the failed border, the two-digit statistics of qualification and non-conformity may not change for the time being. The retention of test configurations and distribution of results will help identify batches of material, process drifting or equipment changes. The reference is used to monitor the testing system, while the marginal samples are used to observe abundance, which is different. The improvement measures should be compared back and forth under consistent conditions, and it should be verified that no bad transitions to subsequent processes have been made.

An easily ignored reversal.

If two devices are labeled as having similar speeds, one needs a long debugging, the other is more suitable for short orders. For many small-volume plants, even if they run slow, the latter can deliver more good. Only when the equipment price is put in the real order structure will it show a difference.

Put your judgment in the real situation.

The time taken to run, change, first recognition and return work is measured by the planned actual material test.

It is recommended that raw materials, process parameters, detection configurations and poor types be recorded in batches and that electrical failure be separated from appearance failures.

How many bases do you have to decide what's worth?

Observation dimensions Evidence to be retained
Process Retroactivity Material batches, platforms and process versions are available for inspection
It's consistent. Comparison of thresholds and dispersions under the same conditions
Bad closed circle The results of the failure analysis return to design or process
This is the key trade-off. You compare the number of metres that the equipment travels every hour, or how many qualified labels are delivered every hour?

It's worth asking.

You compare the number of metres that the equipment travels every hour, or how many qualified labels are delivered every hour?

Technical and factual references