Automobile electronic tags. First priority.
Industry News

Automobile electronic tags. First priority.

PublishedShanghai Zejie Smart Technology Co., Ltd.
To advance its bus priority policy, Shenzhen's traffic police introduced priority at traffic signals using electronic vehicle tags. The system covers 36 approaches at 13 intersections on representative roads including Xinqu Avenue and Shennan Avenue. “Previously, buses only got priority in dedicated lanes, not at traffic lights. As a tagged bus approaches an intersection, the tag readers detect it in real time within their coverage area. On detecting a bus, the system sends a priority command to the traffic lights and adjusts the red or green phase immediately. If the light is already green but about to change, it automatically stays green for another 1–8 seconds so the bus can pass without stopping. If the light is red, the red phase is shortened immediately, and the green phase starts 8 seconds early so the bus waits as little as possible.”
Currently, electronic tags on buses are used.Taginstallation status and continued monitoring how effectively buses received priority at Xinqua Avenue's Minbao Road and Zhongmei Road intersections. Two weeks of data since August 1 showed that the two intersections gave priority to more than 300 bus trips a day on average. Each nonstop priority passage cut red-light waits by at least 34 seconds, saving buses a combined average of 10,200 seconds, or 2.8 hours, a day. This gives buses a clear advantage over driving.
After refinement, 36 of the first 13 blocks are fully operational, and it is expected that the bus will pass through the block, calculated by having at least 150 priority traffic per day for each roadblock, with 13 routes being given approximately 2,000 preferential access, and a cumulative reduction in the waiting time of 68,000 seconds. The passenger transport will be prioritized to more than 34,000 people per day, based on a semi-pital average of 17 persons per bus. To limit the overall traffic capacity, achieve rapid priority for public transport, and adjust design to the red and green light when it is fitted, using a two-cycle compensation approach, with the green light being extended over the next cycle to reduce the length of the traffic due to the traffic priority, so as to balance the traffic requirements of all parties, ensuring average access capacity at the roadway.