Cars weighing RFID solutions
Large energy-consuming enterprises, mines and warehouses have a large daily cargo transport vehicle to and from them. This requires parking, registration, weighing and so on. The manual recording of data into computers by operators is not only time-consuming but also has high error rates, which can also breed human fraud and cause considerable economic losses to the enterprise.
The RFID heavy system is said to be effective in addressing the disadvantages of the traditional weighting method described above, and all vehicles to be measured are equipped with "electronic licence plates" - i.e. radio frequency tags (TAG), which are automatically recognized by a special reading device when they are overscaled. And this electronic licence plate cannot be taken (solved “cloned” problems) once installed. The electronic car plate contains a piece of scales to address the problem of “repeated overbalms”. Special readers can integrate the original measurement system into a complete system, achieve automatic measurement, integrate autonumber recognition, avoid manual operations completely, and be efficient.
System characteristics:
1. The computer automatically records the electronic license plate of every vehicle crossing the weighbridge, without manual intervention.
2. Electronic plates cannot be removed once installed.
3. Electronic licence plate data cannot be forged or reproduced, eliminating the root causes of duplication, forgery and fraud.
4. Specialized electronic licence plates can withstand the harsh conditions of damp, cold and hot.
5. The electronic license plate uses passive technology and has an exceptionally long service life with no maintenance required.
6. Full access to distance; identification of distance above 7 m and adaptation speed up to 80 km/h.
Customs electronic gate automatically certifiedRFIDSolutions:
Customs is a bridge and link between the country and its borders, and the high traffic of vehicles at customs gates can cause congestion, affect the efficiency of clearance and create difficulties for customs administration.
The Customs electronic gate automatically approves the RFID system, which consists of remote readers, and electronic tags that prevent their removal, so that vehicles and drivers can be identified and recorded automatically, and integrated with the EDI electronic customs information platform. The customs declaration data is automatically checked against drivers, vehicle information, and manual recording, review, acceptance, etc., is significantly increased in speed of clearance.
System design objectives:
1. Establishes a smart card-gate system, installs an electronic drop-in control instruction system with a traffic light, a sub-system for driver ' s RFDI electronic tag vehicle management, a lbn data gravity-mining system and a real-time processing system for electronic card-port data.
2. Installation of a traffic track light and electronic sputch system to control the rise or fall of the stop through receiving matching instructions from the card-gate management system, as well as red and green lights, for the purpose of directing vehicles to release.
3. Installation of a sub-system for the electronic RFDI tag driver ' s vehicle management, issuance of an electronic driver ' s sticker card to vehicles entering the port area, pre-recorded entry of basic information on the vehicle and driver, data reading at the gate and matching with the system.
4. Installation of a RFDI reading and writing data acquisition system at the pound, which collects weighing data on vehicles entering and leaving the card entry and calculates the weight of cargo in the port area
5. Integration of all the equipment at the card points through the Real-Time Processing System for Electronic Carnet Data, and data interaction with the Customs Control Operations System.
System framework:
The container corridor management system includes the Electronic Licenser Automatic Identification System, the Red and Green Light Electronic Porter Control System, the Lmbn Data Acquisition System and the Cartoon Integrated Management System.
The RFID heavy system is said to be effective in addressing the disadvantages of the traditional weighting method described above, and all vehicles to be measured are equipped with "electronic licence plates" - i.e. radio frequency tags (TAG), which are automatically recognized by a special reading device when they are overscaled. And this electronic licence plate cannot be taken (solved “cloned” problems) once installed. The electronic car plate contains a piece of scales to address the problem of “repeated overbalms”. Special readers can integrate the original measurement system into a complete system, achieve automatic measurement, integrate autonumber recognition, avoid manual operations completely, and be efficient.
System characteristics:
1. The computer automatically records the electronic license plate of every vehicle crossing the weighbridge, without manual intervention.
2. Electronic plates cannot be removed once installed.
3. Electronic licence plate data cannot be forged or reproduced, eliminating the root causes of duplication, forgery and fraud.
4. Specialized electronic licence plates can withstand the harsh conditions of damp, cold and hot.
5. The electronic license plate uses passive technology and has an exceptionally long service life with no maintenance required.
6. Full access to distance; identification of distance above 7 m and adaptation speed up to 80 km/h.
Customs electronic gate automatically certifiedRFIDSolutions:
Customs is a bridge and link between the country and its borders, and the high traffic of vehicles at customs gates can cause congestion, affect the efficiency of clearance and create difficulties for customs administration.
The Customs electronic gate automatically approves the RFID system, which consists of remote readers, and electronic tags that prevent their removal, so that vehicles and drivers can be identified and recorded automatically, and integrated with the EDI electronic customs information platform. The customs declaration data is automatically checked against drivers, vehicle information, and manual recording, review, acceptance, etc., is significantly increased in speed of clearance.
System design objectives:
1. Establishes a smart card-gate system, installs an electronic drop-in control instruction system with a traffic light, a sub-system for driver ' s RFDI electronic tag vehicle management, a lbn data gravity-mining system and a real-time processing system for electronic card-port data.
2. Installation of a traffic track light and electronic sputch system to control the rise or fall of the stop through receiving matching instructions from the card-gate management system, as well as red and green lights, for the purpose of directing vehicles to release.
3. Installation of a sub-system for the electronic RFDI tag driver ' s vehicle management, issuance of an electronic driver ' s sticker card to vehicles entering the port area, pre-recorded entry of basic information on the vehicle and driver, data reading at the gate and matching with the system.
4. Installation of a RFDI reading and writing data acquisition system at the pound, which collects weighing data on vehicles entering and leaving the card entry and calculates the weight of cargo in the port area
5. Integration of all the equipment at the card points through the Real-Time Processing System for Electronic Carnet Data, and data interaction with the Customs Control Operations System.
System framework:
The container corridor management system includes the Electronic Licenser Automatic Identification System, the Red and Green Light Electronic Porter Control System, the Lmbn Data Acquisition System and the Cartoon Integrated Management System.

Ms. Lei
Mr. Pang