The sensor's passive RFID has grown strongly in recent years.
The sensor-based passive RFID label has grown strongly in recent years. In some subdivision markets, such as the temperature and humidity testing market, sales have outpaced battery powerless labels (BAP). A report by IDTechEx shows that in 2017, 5.2 million passive RFID sensors were sold on the market, while the BAP RFID tags sold only 330,000.
The British market research company IDTechEx claims that sensor-based passive RFID labels have grown strongly in recent years. In some subdivision markets, such as the temperature and humidity testing market, their sales far exceed battery powerless labels (BAP). A report by IDTechex shows that in 2017, 5.2 million passive RFID sensors were sold on the market, while the BAP RFID tags sold only 330,000.
The company predicts that in the next decade, the sales of source and passive RFID sensors will reach $400 million, while the sales of solutions will reach $904 million. And the entire RFID market is expected to be 20 billion in 2027, with a growth rate of 12% for sensor labels next year.
The study compares the passive and active RFID sensor systems provided by about 50 companies around the world, including high frequency (HF) and ultra-high frequency (UHF) labels. According to IDTechEx CEO Raghu Das, the number of RFID sensors suppliers has also increased over the past year or so as the penetration and cost of HF and close wireless communication (NFC) application readers have declined.
Das says that the RFID label for battery power has been 15 years old, but it is very limited in use. He says: "The sale of these products is poor because of price factors. The study found that the average unit price for RFID tags for batteries is $16, which is far above most applied budget prices."
In recent years, with the launch of sensor-based RFID integrated circuits, the cost of RFID sensor tags has been reduced to less than $10, but this still limits their use to high-value items or reusable scenarios.
RFMicron and others have provided a limited range of passive sensors. Without the panel batteries, these sensor labels cannot store data and can only respond to queries.
For example, leak detection labels are used to detect leakages in new vehicles when they are tested at the production site.
Another common example is the tracking of water in adult diapers in health institutions.
The system also works with fixed readers. Das cited an application that requires monitoring the temperature of critical machinery parts. For example, a wind farm could install a fixed UHF RFID reader inside a wind turbine and attach a passive RFID sensor tag to every blade. The reader can then retrieve sensor data as each blade comes within range and check for abnormal temperatures.
So far, the number of passive URHF sensor labels exceeds the number of NFC tags. Research has found that 42% of IC manufacturers of these tags are based on URHF chips, 35% on NFC and 23% can transmit both NFC and UHF.
Another built-in biosensor, non-active RFID sensors, is also being introduced, and they are being used in the research phase and in pilot projects. Currently, less than 5,000 products of this type are sold annually. Biosensors labels use a sensor membrane connected to IC, and when certain conditions are met, the RF transmission changes when the label is read.
Biosensors labels are very low production costs, and can be used to track conditions other than temperature humidity. For example, if a biosensor detects the presence of explosives or specific chemicals, the transmission status of these labels can change. However, they require a unique card reader to read and decompose them at a price more expensive than a standard readers or NFC smartphone.
Das predicts that the market for battery-aided and passive RFID sensors will continue to grow as RFID becomes a low-cost alternative to Wi-Fi or Bluetooth systems.
Das says it's a print of temperature sensors and...RFIDThe release of antennas, soft cells and transistor circuits will also facilitate the spread of RFID's sensor solutions.
The British market research company IDTechEx claims that sensor-based passive RFID labels have grown strongly in recent years. In some subdivision markets, such as the temperature and humidity testing market, their sales far exceed battery powerless labels (BAP). A report by IDTechex shows that in 2017, 5.2 million passive RFID sensors were sold on the market, while the BAP RFID tags sold only 330,000.
The company predicts that in the next decade, the sales of source and passive RFID sensors will reach $400 million, while the sales of solutions will reach $904 million. And the entire RFID market is expected to be 20 billion in 2027, with a growth rate of 12% for sensor labels next year.
The study compares the passive and active RFID sensor systems provided by about 50 companies around the world, including high frequency (HF) and ultra-high frequency (UHF) labels. According to IDTechEx CEO Raghu Das, the number of RFID sensors suppliers has also increased over the past year or so as the penetration and cost of HF and close wireless communication (NFC) application readers have declined.
Das says that the RFID label for battery power has been 15 years old, but it is very limited in use. He says: "The sale of these products is poor because of price factors. The study found that the average unit price for RFID tags for batteries is $16, which is far above most applied budget prices."
In recent years, with the launch of sensor-based RFID integrated circuits, the cost of RFID sensor tags has been reduced to less than $10, but this still limits their use to high-value items or reusable scenarios.
RFMicron and others have provided a limited range of passive sensors. Without the panel batteries, these sensor labels cannot store data and can only respond to queries.
For example, leak detection labels are used to detect leakages in new vehicles when they are tested at the production site.
Another common example is the tracking of water in adult diapers in health institutions.
The system also works with fixed readers. Das cited an application that requires monitoring the temperature of critical machinery parts. For example, a wind farm could install a fixed UHF RFID reader inside a wind turbine and attach a passive RFID sensor tag to every blade. The reader can then retrieve sensor data as each blade comes within range and check for abnormal temperatures.
So far, the number of passive URHF sensor labels exceeds the number of NFC tags. Research has found that 42% of IC manufacturers of these tags are based on URHF chips, 35% on NFC and 23% can transmit both NFC and UHF.
Another built-in biosensor, non-active RFID sensors, is also being introduced, and they are being used in the research phase and in pilot projects. Currently, less than 5,000 products of this type are sold annually. Biosensors labels use a sensor membrane connected to IC, and when certain conditions are met, the RF transmission changes when the label is read.
Biosensors labels are very low production costs, and can be used to track conditions other than temperature humidity. For example, if a biosensor detects the presence of explosives or specific chemicals, the transmission status of these labels can change. However, they require a unique card reader to read and decompose them at a price more expensive than a standard readers or NFC smartphone.
Das predicts that the market for battery-aided and passive RFID sensors will continue to grow as RFID becomes a low-cost alternative to Wi-Fi or Bluetooth systems.
Das says it's a print of temperature sensors and...RFIDThe release of antennas, soft cells and transistor circuits will also facilitate the spread of RFID's sensor solutions.

Ms. Lei
Mr. Pang