ZJ-TDM01: Smart Door Ban on New Marker, Accurate Identification of Ultra-Efficiencies, Shanghai-Peager Smart Technologies Ltd.
Shanghai Zejie ZJ-TDM01 UHF RFID Portal: A New Benchmark for Fast, Accurate Access Control As demand for smart operations grows, the ZJ-TDM01 from Shanghai Zejie Smart Technology Co., Ltd. combines an attractive design and high performance to help organizations upgrade across a range of sectors. Each pedestal measures 1,490 × 370 × 50 mm, with a 206 mm base. The primary and secondary pedestals are specified at 21 kg, making installation straightforward. FCC (902–928 MHz) and ETSI (865–868 MHz) versions are available for different regions. The portal conforms to ISO 18000-6C/EPC C1G2, ISO 18000-6B, and optionally GB/T 29768-2013, for reliable operation and broad compatibility. The operating temperature is −20°C to 50°C, the storage temperature is −30°C to 70°C, and ambient humidity is 5%–95% RH, noncondensing. The power supply is 220 V AC ±10%. Output power is adjustable from 0 to 33 dBm, as is the read range from 0 to 400 cm. RJ45 and RS232 interfaces are provided, with Wi-Fi and 4G optional. The recommended width per lane is 1.5–2 m. The unit has a silver-gray alloy frame and an off-white acrylic panel, with audible and visual alarms. The proprietary design incorporates a widely used UHF identification module for reliable simultaneous reading of multiple tags. An in-house high-gain narrow-beam antenna controls the read zone and eliminates blind spots. The built-in alarm light and buzzer respond quickly. Optional custom features include direction-of-travel detection, a display, and remote upgrades. The portal consists of primary and secondary pedestals, a 10 dBi narrow-beam antenna, a feed line, a control board and power supply, an RFID reader module, an alarm, a through-beam infrared sensor and connecting cable, and a two-color LED strip. The reader's RF module uses an Impinj R2000 chip with a high-performance multi-tag identification algorithm and an algorithm optimized for small tag populations. This makes identification fast and tags quick to respond. A dual-CPU-like architecture allows tag polling and data management to run in parallel. The reader also offers fast four-antenna polling, hardware lockup detection, RF power amplifier (PA) protection, antenna connection detection, and effective heat dissipation for stable extended operation. The aluminum reader housing measures 200 (L) × 204 (W) × 30 (H) mm and weighs 820 g. Input is 12–24 V DC, with low current draw in standby and sleep modes and stable current while operating. It uses the EPCglobal UHF Class 1 Gen 2/ISO 18000-6C air interface and operates at 860–960 MHz, with good output power accuracy and flatness and high receiver sensitivity. Peak inventory speed is 700 tags per second. The reader supports tag RSSI, ambient temperature monitoring, and standalone or dense-reader mode. The default communications baud rate is 115200 bps and can be configured. For warehouse logistics, libraries, or personnel access control, the ZJ-TDM01 UHF RFID portal combines strong performance and a broad feature set to make smart operations more accurate and efficient.
Shanghai Zejie ZJ-TDM01 UHF RFID Gate: A New Benchmark for Smart Access Control and Highly Efficient ... Identification
In the current context of growing demand for smart management, Shanghai-based Smart Technologies Ltd. has emerged as a powerful assistant to the advancement of intelligence in many fields by launching high-performance ultra-high frequency RFID portals ZJ-TDM01.
The ZJ-TDM01 measures 1490 × 370 × 50 mm per gate panel, with a 206 mm base. The primary and secondary panels weigh 21 kg, making them lightweight and easy to install. FCC (902-928 MHz) and ETSI (865-868 MHz) bands are available to meet regional frequency requirements. The gate complies with several international and Chinese standards, including ISO 18000-6C/EPC C1G2, ISO 18000-6B, and GB/T 29768-2013 (optional), offering excellent stability and interoperability. The operating temperature range is -20°C to 50°C, the storage temperature range is -30°C to 70°C, and ambient humidity is 5%-95% RH, non-condensing. The power supply is 220 V AC ±10%, output power is adjustable from 0 to 33 dBm, and the read range is adjustable from 0 to 400 cm. RJ45 and RS232 interfaces are provided, with Wi-Fi and 4G optional, to support various systems. The recommended width per access lane is 1.5-2 m. The gate uses alloy profiles and acrylic facing, with a silver-gray body and off-white panels for a clean appearance. It also provides audible and visual alarms.
The features of ZJ-TDM01 are very prominent. It has an autonomous intellectual property design, a mainstream hyperhigh frequency (UHF) recognition module with super-moderated reading capabilities that ensure the reliability of identification data. It is built from a high-growth narrow beam antenna that effectively controls the identification area and removes the blind spot. The embedded alarm lights and beepers are responsive to secure features. In addition, it supports functionality customization, such as judging access directions, displaying screens, remote upgrades, etc., to meet the individual needs of different users.
The portal consists of the main door, the side door, 10dBi narrow beam antenna, the feedback, the control panel and power source, RFID reading and writing module, alarms, infrared pairing, infrared connectors, LED double-coloured lamps. Among these, the reader features are particularly bright. The core chip of the radio frequency module uses ImpinjR2000, which is used to optimize algorithms with high performance multiple tag identification and a small number of labels, recognizing that it is highly efficient and that labels react very quickly. The two CPU structures design allow for both wheel query labels and data management to improve overall performance. It also has fast 4 antennas, hardware dead-end monitoring, a variety of practical functions such as radio frequency power amplifier PA protection, antenna connection detection, and thermal heat design that ensures that equipment can be stable over time.
In electrical and mechanical parameters, the reader's outer dimensions are 200 (L) x 204 (W) x 30 mm (H), weighing 820g, and the shell material is aluminium. Entering a voltage DC12V~24V, low-alteration and sleep-state currents stabilize. The Aerial Interface Protocol is the EPCglobalUHFClass1Gen2/ISO18000-6C, the work spectrum range 860 MHz ~960MHz, good output power accuracy and output power level, high sensitivity, inventory label peak speed of 700 per second, support multiple functions such as label RSSI, ambient temperature monitoring, single/intensive working mode, The communication Porter rate is defaulted at 115,200 bps (configurable).
Whether in storage logistics, library management or people access control, ZJ-TDM01 hyperhigh frequency (UHF) RFID portals can provide... efficient solutions to smart management with their excellent performance and rich functionality, and help industries to improve their management efficiency and move to new levels of intelligence.

Ms. Lei
Mr. Pang