UHF RFID hand-held reader ZJ50 series

Model: ZJ50-SERIES-2

UHF RFID handheld pictures of the readerZJ50 series
In the city's bus movement centre, UHF RFID is a good hand-held reader for dispatchers. Before you send a car, the dispatcher carries a UHF RFID hand-held reader, reads electronic tags on public transport vehicles, checks vehicle status, runs lines, etc. When you operate, the dispatcher can use UHF RFID to hold a read-reader, locate the vehicle position quickly and issue a dispatch order. Once you collect the car, it is used again to check back the vehicle's information and ensure that it works in an orderly manner.

Product Overview

I characteristics
◆ High-speed octopus processor, large memory storage: This equipment uses Android10.0, the Eight Nuclear Processor Program (four nuclear Cortex-A73+ four small nuclear Cortex-A53), equipped with 2+16G (show), 4+64G (selection) memory combination, more fluid and stable running speed
◆ Powerful fast charge to WiFi Rover: This equipment is equipped with a 9000 mAh lithium-based polymer battery, which is sustained; supports fast charge, which is shorter in single charge; and strong WiFi Rover, which allows seamless switching of WiFi hot spots and maintains uninterrupted network connections
◆ Excellent RFID reading and writing, multi-label remote read: using a full ceramic antenna in conjunction with professional scanning handles and shields, the device supports UHF single labels and multiple tags, more distant, more efficient, more stable whole machine performance, effective reading distance up to 20 m
• Whole machine size: 166 x 79 x 31 ± 2 mm (excluding shields, handles)
◆ Whole weight: 650 g
• Display: 5.5 inches IPS high-resolution 720*1440
◆ Touchscreen: industrial-grade capacitive multi-touch display with Corning Gorilla Glass 3
• Extension slot: 1 sim-C785, 1 TF, 1 PSAM (MUP-C785)
Communications interface: 1 Type-c interface
• Indicator lamps: network indicators, charge-up indicators
◆ Keys: Scan, function keys
• Flashlights: low-capacity LED light, emergency use
· Navigation system: GPS, Beidou navigation option, error range ± 5 m
◆ Operating system: Android 10.0
• Processor: Eight nuclear (four cores Cortex-A73 + four small nuclears Cortex-A53)
• Memory RAM+ROM: Mark 2GB+16GB, select 4GB+64GB
• Primary Battery: 9000 mAh Plymethodium Lithium Batteries

ⅢProduct Presentation

UHF RFID hand-held reader product presentation chart 1


Ⅱ UHF RFID hand-held readers-ZJ5001RI (R2000 module)


● Basic parameters

Whole machine size    164.2mm×80.0mm×24.3mm
Whole weight    654g
Display 5.2 inches, IPS FHD 1920 x 1080 resolution
Touch screen Conning gorilla glass, multi-touch, gloves or wet hands.
Battery capacity Chargeable lithium polymer batteries, 8,000 mAh
Standby time > 500 hours
Hours of work > 12 hours (depending on usage and network environment)
Charging time 3-4 hours (using standard distribution source adapters and data lines)
Expand Cartr. One SIM slot and one shared slot for a SIM or TF card
Communications interface USB 2.0 Type-C and OTG; the octa-core version supports Type-C headphones
Audio Speaker and 2 microphones
Keyboard 4 master keyboards, 1 power key, 2 scanning keys, 1 multifunctional key
Sensors Gravity sensors, light sensors, distance sensors

● Product Presentation
UHF RFID hand-held rewrite product presentation chart 2


Ⅲ UHF RFID hand-held readers-ZJ5002R


● Basic parameters
Whole machine size 164.2 mm x 78.8 mm x 17mm (basic version)
Whole weight < 288g (basic version) (depending on the configuration of the module)
Display 5.2 inches, IPS FHD 1920x1080 resolution
Touch screen Conning gorilla glass, multi-touch, gloves or wet hands.
Battery capacity Rechargeable lithium polymer batteries 5000mAh
Standby time > 350 hours
Hours of work > 12 hours (depending on usage and network environment)
Charging time 3-4 hours (using standard distribution source adapters and data lines)
Expand Cartr. One dedicated SIM slot and one shared SIM/TF slot; two of the three card options can be used at a time.
Communications interface USB 2.0 Type-C and OTG; the octa-core version supports Type-C headphones
Audio Speaker and 2 microphones
Keyboard 4 master keyboards, 1 power key, 2 scanning keys, 1 multifunctional key
Sensors Gravity sensors, light sensors, distance sensors, vibration motors

● Product Presentation
Figure 3 UHF RFID hand-held reader product display


Ⅳ UHF RFID hand-held readers-ZJ5009

● Basic parameters
Product Model   ZJ5009
Overall Dimensions 166 mm (long) x 77.5 mm (wide) x 22 mm (g)
Andreau System   8.1
Display 4.5 " IPS colour screen, resolution 480 x 854
Capable TTP 4.5-inch TP, support multitouch.
Weight < 500g (batteries)
Keyboard 13 keys in total:
1) Front: 1 scan key, 1 delete key, 1 confirmation key, 1 return key, 1 function key, 2 shortcut keys.
2) Side: Volume plus minus keys, 2 scans, 1 custom key, 1 power key.
Expand Cartridge PSAM card x 1
TF Card x 1
SIM card x 1
  POGO Pin × 1
Micro USB x 1, supports OCG functionality
Main power source 1, 3.7 V 4000 mn;
2 - 8 hours of continuous full-purpose work;
3 Time on stand-by 72 hours.
RTC Battery Keeps the clocks on the equipment.
Charging Time The online charge does not exceed 4 hours (USB interface)
The belt. Wristband*1
Vibration Mada*1
Lanterns 2 double colour lamps
Lights 1. Lightness of the flash of the torch is regulated;
2, Lightlight: Same as camera flash.
Light Sensitivity Supporting light sensors

● Product Presentation
Figure 4 UHF RFID hand-held reader product display


Ⅴ UHF RFID hand-held readers-ZJ5010


● Characteristics
1. Anjo system high-speed four nuclear processor
Using the Android 7.0 system, Quadrant high-speed processor, 2GB RAM, 16GB ROM; supporting 128GBTF card extensions, large storage capacity, and fast running,
Performance is stable. Mandate instructions can be easily handled, and multiple tasks are supported by smooth flow, which guarantees the processing of mobile information.
2. Customization development, functionality options
Supports one-dimensional/two-dimensional, UHF/HF/LF, PSAM, NFC, etc., and can be configured to provide a partial module provided by the client and a secondary development connection
(c) A supply of both oral and technical support to meet the needs for applications in a wide range of industries.
3. Strong bar-code scanning
Supports 1D, 2D barcode scans that provide faster recognition accuracy and speed. They also allow for readable stain/low quality bar codes to ensure efficient and fast reading.

● Basic parameters
Product Model   ZJ5010
Whole machine size   162×78×22±2mm
Whole weight Less than 450 grams
Display 4.7 inches of IPS high-resolution 720* 1280
Touch screen Industrial-grade capacitive multi-touch screen with Corning Gorilla Glass 3.
Expand Slot 1 sim, 2 PSAM
Communications interface High-speed USB2.0 equipment end interface 3.5 stick plugs to charge port
Lanterns Network signlights, charge-up light
Keyboard Scan key, function key
Camera Backup 8 million pixel cameras, with flashlights, automatic focus.
Flashlight. Lighting of low-capacity LED lamps for emergency use
GPS Navigation internal GPS, error range ± 5 m

● Product Presentation
UHF RFID hand-held reader product presentation chart 5


Ⅵ UHF RFID hand-held readers


● Basic parameters
Host Size    219*89*62MM
Host Weight 445g (excluding paper and bottom)
Display 5.5 inches.
Resolution    1280*720
Touch screen Electro-Perceptive Touch screen
Battery capacity 7.4V charged lithium polymer, 4,000 mAh
Carrot. 2 SIM slots
Communications interface MicroUSB, 3.5 mm earphone interface
Audio Speaker, vibrator
Button 1 power, 2 volume, 1 custom key
Sensors Electronic compass sensors, gravity sensors

● Product Presentation
UHF RFID hand-held rewrite product presentation figure 6


Ⅶ UHF RFID hand-held readers

● Basic parameters
Host Size    219*89*62MM
Host Weight 445g (excluding paper and bottom)
Display 5.5 inches.
Resolution    1280*720
Touch screen Electro-Perceptive Touch screen
Battery capacity 7.4V charged lithium polymer, 4,000 mAh
Carrot. 2 SIM slots
Communications interface MicroUSB, 3.5 mm earphone interface
Audio Speaker, vibrator
Button 1 power, 2 volume, 1 custom key
Sensors Electronic compass sensors, gravity sensors

● Product Presentation
UHF RFID hand-held reader product presentation chart 7


Ⅷ UHF RFID hand-held readers

● Basic parameters
Host Size    219*89*62MM
Host Weight 445g (excluding paper and bottom)
Display 5.5 inches.
Resolution    1280*720
Touch screen Electro-Perceptive Touch screen
Battery capacity 7.4V charged lithium polymer, 4,000 mAh
Carrot. 2 SIM slots
Communications interface MicroUSB, 3.5 mm earphone interface
Audio Speaker, vibrator
Button 1 power, 2 volume, 1 custom key
Sensors Electronic compass sensors, gravity sensors

● Product Presentation
UHF RFID hand-held rewrite product presentation chart 8




Specifications

Read Range0.2-8m
Screen Size5.2-inch monitor
Operating Frequency13.56MHz-960MHz
Extension InterfaceBarcodes and QR codes
Data communicationsWi-Fi, Bluetooth, 2G, 3G, USB 2.0 Type-C, and OTG; the octa-core version supports Type-C headphones