Full-door source base station ZJB-51
Model: ZJB-51
Product Overview
• The full-sourced base station ZJB-51, a generic type of equipment, is built into 3dbiPCB antennas and only for interior installation.
• There are three LED lamps below the device to indicate the working state of the device; an inline beeper can read the label status through acoustic tips, and sound is long enough to be used for software settings or shut down.
• Equipment interfaces include: TCP/IP portal, RS232, RS485, Wegen; and an in-house relay to read the card relay closed.
◆ The device is configured primarily through RS232 interfaces, which must be configured with the software before being used and also supports dial-up switches to configure common parameters.
• Main application scenarios: personnel access and attendance, tunnel construction staff attendance, mine site attendance, operational vehicles approaching the personnel security alarm system, asset management system, fixed assets management system.
Main product advantages
• Strong resistance to interference and protection from outside radio waves;
• Strong ability to read labels at the same time (high impact resistance);
• A buffer zone with 2000 labels;
• High water-resistant: IP56 (indoor use);
• Read labels at a adjustable distance of 0-50 metres (using software settings);
• Multiple interfaces, easy to use;
• Support for relay output;
• No external connection, all interfaces are integrated on the equipment.
Main functions
• Operational status of equipment (3 LED indicators, built-in beepers);
• Read labels are kept in the buffer zone with a buffer capacity of 2,000 labels;
• Read the labels and be able to transmit them through TCP/IP portal, RS232, RS485, Wegen 26/34/66;
• Communication modes have active and passive transmissions;
• RS232, RS485 communication rates can be set;
• Distance to read labels can be set (0-31 files);
• The interval between reading the same label can be set;
• The speed at which the labels can be uploaded;
• External trigger-starter readers;
• Supports the output of relays. When you read a label, the relays close and can be set up in software at closed hours;
• External input signals can be used to shut down relays;
• Supports dial-up switches to set common parameters;
• Capable of reading equipment exit information.
Basic information
• Model: ZJB-51
• Product type: 2.4G Active RFID reader
• Working frequency: 2.4GHz
~ Simultaneously read labels: greater than 2000
• Product material: ABS plastic
• Product colour: Grey
Antenna: Inline 3dbi antenna
◆ External connection: DC power plug, DB9-M, RJ45, 12P connector, dialer
• Communications interface: TCP/IP portal, RS232, RS485, Wegen 26, Wergen 34, Weegan 66
◆ Status indicator: Bottom 3 LED light instructions, built-in beeper
• Relay output: When read to card, relays are closed and closed at closed hours through software settings
◆ Trigger reading card signal: trigger the read card signal outside and trigger post-read card delay can be set by software
◆ Status input signal: information on the status of the journey, which can also be used to shut down relays
• Power source: DC12-36V
• A rated power of 1W
· Working temperature (°C): -25°C ~ +75°C
· Storage temperature (°C): -40°C ~ +85°C
• Work moisture: less than 95%
• Equipment dimensions: 168 mm x 50 mm
• Equipment weight: 1kg
• Packaging size: 250 mm x 250 mm x 80 mm
• Number of packagings: 1
Packaging weight: 1.5 kg
Main technical parameters
• Working frequency: 2.4GHz-2.5GHz;
• Working methods: active and passive combinations;
• Structure: the mask is high temperature-resistant, low temperature-resistant ABS plastic;
Antenna parameters: incorporated 3dbi antenna;
• Communication interface: TCP/IP portal, RS 232, RS 485, Wegen 26, Wergen 34 and Weegan 66;
• Communication mode: active (readers read and written, sent to the top machine);
• A buffer capacity of 2,000 labels within the equipment;
• RS232, RS485 speed of communication can be set for users;
• Reading card distance: 50 m;
◆ Identification accuracy: 99.999999%;
• Provide demonstration software, API functions, etc.;
• The various data formats can be developed according to user requirements;
• Working voltage: DC12-36V;
• A rated power of 1 W;
• Working temperature: -25°C ~ +75°C;
• Storage temperature (°C): -40°C ~ +85°C;
• Work moisture: less than 95 per cent;
• Equipment dimensions: 168 mm x 50 mm;
• Equipment weight: 1.0 kg;
• Packaging dimensions: 250 mm x 250 mm x 80 mm;
• Number of packagings: 1;
• Packaging weight: 1.5 kg.
List of product containers
• ZJB-51:1 full-source base station in the interior;
• AC-DC12V3A power adapter: 1;
• 3 ribs of straight lines: 1;
• Installation of a support rack: 1;
:: Qualifications: 1;
• External signal instructions: 1.
Product Photos
Specifications
| Overall Dimensions | 250*250*80mm |
|---|---|
| Operating Frequency | 2.4GHz-2.5GHz |
| Operating Temperature | -25~+75℃ |
| Storage temperature | -40~+85℃ |
| Modus operandi | Active and passive combinations |
| Antenna parameters | Inline 3dbi antenna |
| Applications | Personnel out... |

Ms. Lei
Mr. Pang