What does the asset inventory system have to do with RFID? Interfaces and data consistency
RFID Knowledge

What does the asset inventory system have to do with RFID? Interfaces and data consistency

PublishedShanghai Zejie Smart Technology Co., Ltd.

On the inventory site, the reader shows that the label is read and the asset system still shows “uncounted”; sometimes two records appear in the same asset. The key to docking with RFID is not just for equipment to pass data over, but also to harmonize asset identification, incident calibre and treatment rules and to use a reconciliation mechanism to detect discrepancies.

The tags were read on the spot, but the system was not right for the asset.

The common first card point is that the RFID tag number is not the same field as the asset number in the asset system. reader reports a label code, but the business system may be looking for an asset card number; if there is no stable map on either side, data cannot be accurately recorded on the asset record, even if it is successfully transmitted.

Three things are confirmed before you go: whether the label code is global and unique; whether an asset may bind multiple tags; how old maps will fail when the label is changed, the asset is scrapped or transferred. The interface field should at least specify the asset identifier, the label code, the inventory task number, read time, equipment or area identification, and indicate the format of the field, which must be filled in with requirements and time zones. When Shanghai Cheekstech, when combing such interfaces, it will clear the field meanings and operating rules to avoid a development that would lead to a different understanding of the asset number.

The data is coming. What about repetition and error?

RFID reading results may be repeated in a short time or may be misread to the adjacent area because the label is read. The interface cannot use each read record as a valid inventory directly. It can set the only current number for an event, or it can be re-referenced with the words " Job Number, Label Encoding, Device Number, Reading Time " ; the specified heavy window needs to be combined with live moving speed, equipment reporting and stocking rule tests are determined, and it is not appropriate to apply a fixed number of seconds directly.

How to avoid slips and miscalculation after the interface is broken

The network is briefly interrupted at the time of the warehouse count, and equipment may be stored and re-routed after recovery. If the interface does not retest and other processes such as stropy, the same data may be lost or recorded again. It is recommended that event records with a business flow number be used: accept end check to return the result after the required fields and format; sendend only retrys for unrecognised records; receive end recognize processed stream numbers and return the original results instead of re-executing the status change.

Also distinguish between " interface received " and " business processed." The former indicates that data reach the service end, the latter means that asset systems have been verified or updated. For a formal error, assets do not exist, labels are unbound, etc., the searchable error code and cause should be returned, and original records kept, which can be modified and replayed. This allows for field personnel to identify whether the equipment is not reported, the interface is not received, or the business rules reject data.

After the count is completed, confirm results with reconciliation

The inventory completion should not be based on an interface success rate, but also check the results of the reading details and asset systems in the mission: Number read, number of duplicate records, number of unread labels, failure to read the number of assets and unusual area records. If there is a discrepancy, keep the task number, time, device, tag encoding and processing status, so that you can review the data according to the same data. The test phase can overwrite normal reading, repeat reporting, offline relay, invalid tabs and cross-reference reading, and verify whether the results are consistent after retesting.

When you land, you first harmonize the code and field calibre, then you clearly re-engineer, try again with the status update rules, and finally you check the details and the asset desk account reconciliations. The interface is only the starting point; each reading record is traceable, judgmental and reviewable, which is key to ensuring that the assets count results are consistent.