Where are the differences between asset management RFID software and common management software?
Last year we helped an electronics factory with its annual inventory. The warehouse held over 4,000 sensors and modules of different models. Three staff scanned all day with barcode readers, yet the books and the actual stock differed substantially. The owner was frustrated: the ERP cost well over CNY 100,000 and could not even say whether the items were still there. After moving to RFID, the same team counted more than 4,000 items in two hours and surfaced the discrepancies. General management software and RFID asset software are fundamentally different: one relies on people typing data; the other lets the tags report it.
Why did that count almost crash?
The warehouse is packed with a lot of stuff, and the scaffolds need a bar code to read. Some labels are pressed down to the bottom, they can't be cleaned; some barcodes are printed vaguely, they can't jump out; others have nothing to mark when they purchase equipment. Three managers come down in a day, physically and mentally, and there are hundreds of missing items on the account and in physical matter, and nobody dares to sign them.
This is the typical use of regular management software: manual recording, or a swipe-gun. Data are not valid, but it's all on the same day. The column "Asset Number" in the ERP account is essentially a "Asset Number".They're filled in.The numbers look pretty, but the bottom is empty.
Why can't a regular management software handle assets?
General management software, including ERPs, finance modules or common memory systems, is designed for "process." It's good at how much it goes in, how much it goes in, how much it goes in, how much it goes in. The logic between these numbers is clear, but every step of the way depends on people going in.
The asset is in the physical layer, and it's not working. You let it answer "What's in the warehouse," and it just pulls out the last number on the system, and doesn't count it on the shelf itself. If it's wrong when it's entered, it stays on the books until the next count -- and the count itself is on people.
There's another problem: normal bar code can only be cleaned one at a time, and the requirement is right. People leaking through fatigue, and wrong sweeps are normal. We've seen the most exaggerating cases of a class that breaks three scaffolds a month, and it's all just a bad subconscious that can't be swept out.
RFID has changed the way it counts.
The biggest difference between RFID and barcode is that, you know, the only thing that's different from the most important is that it's a "radio frequency recognition" (Radio frequency recognition, simply an automatic tag-reading technology)Non-contact, batch reading. Each asset is labelled electronically, with a number, name, date of purchase and purchase. Reader sends a wave of signals at the entrance, all labels within a few metres of a radius respond to the same and dozens of items are read out in one shot.
The plan that was used at the electronics factory up there, is...Shanghai's technology for the best.A set of RFID portals were deployed. The warehouse entrances were equipped with a whole array of antennas, and the tags were automatically read when the staff pushed the truck in and out; the manager was pushing the car around the shelf, and the entire inventory of the warehouse was updated, and no more stop-and-stop sweeps.
This automatic identification frees people from cumbersome manual entry, and it turns data from "man-filled" to "equipment-owned" reporting. The difference between the two is that the time of count is when you're doing this.Two days to two hours., taking accuracy from the 90s to nearly 100%.
What's wrong with the functional level?
The two software sets were viewed together, with the difference occurring mainly in five locations.
- Data collection methods. The generic management software is read by hand-in-entry or swipe guns; the RFID software is read in bulk by labels, and the actionr is identified without any involvement.
- Inventory ProcessThe normal software count is the human-to-human; the RFID inventory is the RFID book count is the one that pushes a reader to the shelf, and the industry is called "fast-to-the-board"
- Positioning capability. An ordinary barcode only tells you that the item exists in the system. RFID with portals and positioning antennas can tell you it just left Warehouse 3 or is still in the third row of Zone A. That matters for valuable assets and assets subject to strict compliance requirements.
- Unusual detection speed. The regular software waits for the monthly inventory counting to discover less; the RFID system is real time (read every few seconds), and the asset triggers a reminder as soon as it leaves the set area. We have a client who does a sophisticated instrument, which is largely zero when the device goes off the road after RFID.
- Interfacing with existing systemsThe RFID asset system usually interfaces with the existing ERP, the financial system (which allows two software sets to transfer data) and returns the automatically collected data back to the original desk. The interface works well on the same side of the data, but it's not working well on another "data island" -- each one running its own account, which is not right.
What circumstances are worth RFID?
Not all companies need RFID. We've seen a few dozen of company assets, fixed, where everyone knows, and it's time for RFID to be a chicken-killing cow knife. But if you satisfy any of the following, the value of RFID is:
- There are more than 500 assets and staff can no longer keep up with manual counts;
- (a) High value or compliance requirements, such as medical equipment and sophisticated instruments, which are significant in all cases;
- The high level of asset flows, which are due tomorrow, cannot be followed up by the billing;
- The warehouse or workshop was not well-lit, dusty and heavily staffed, and the scaffolds often failed.
Conversely, if assets are small, fixed and poorly altered, it is sufficient to add a swipe-coded weapon to the general management software and there is no need to devolve RFID.
A few pits that can be easily stepped on during the execution.
Finally, we will give a heads-up to those who are considering the problems that we actually encounter.
Tab SelectionRFID divides the work frequency by low frequency, high frequency, ultra-high frequency, etc., with a wide range of reading distance and ability to resist interference. Assets on metal surfaces are labelled as anti-metal, in liquid environments with special coatings, in general labels, which can be reduced to a few centimetres or not read at all.
Antenna setupThe door is installed at the warehouse, but if there are large piles of metal shelves or electromechanical devices in the warehouse, the reflect signal can be misread (reading unreadable labels). The antenna position is to be surveyed on site (with a specialized device to measure the field signal environment), not just by selecting a location.
Interface dockingThe data collected by the RFID system is eventually returned to the ERP or financial system.Interface FieldsThe pre-supplied requirement is fine and cannot be replaced by a waiting line.
Personnel habitsFirst-line employees use a scaffold, and suddenly switch to the portal for automatic identification.
Data security. The RFID labels contain limited information, and sensitive data are not inserted into the labels, and are placed in a more secure back-office system.
Back to the story of the first electronics plant. After RFID on the device, they then made an annual inventory -- from a day to two hours, and the difference was almost zero, and the whole team signed it. The difference between regular management software and RFID asset management software is that, in the end, the former is:A tool for people.The latter isThe system that allows assets to speak on their own.Which depends on your assets being enough, your value being too expensive and moving too often. If the answer is "Enough," then the RFID will be paid.

Ms. Lei
Mr. Pang