What are the advantages of a fixed asset dynamic management system? Real-time data are linked to desktop accounts
RFID Knowledge

What are the advantages of a fixed asset dynamic management system? Real-time data are linked to desktop accounts

PublishedShanghai Zejie Smart Technology Co., Ltd.

Many asset managers are swaying between the two: a register with Excel, a personalized, and a quarterly inventory of traditional desk accounts; and an automated recording of assets as soon as they enter and exit the system, which is a dynamic management system that connects financial book data at any time. The core advantage of the latter is to focus on one point --Putting the time difference between physical data on assets and the financial desk account to close to zeroThe status of assets and book value, which are presented to the enterprise at any time, is a true situation at the same time.

Data timeliness: After-action vs real-time connection

Traditionally, assets are transferred from the use to the end of life, and the records are often entered after the operator has returned the documents, and the financial entry is a few days to weeks of delay. The dynamic management system reverses the process: each asset change is written in an asset card at the same time as the transaction takes place, and the information on the change is sent to the finance module simultaneously.

The extent to which the bank account balances are updated in seconds, following changes in the field of asset cards, where the assets are purchased, the original value, the department used, the location where the depreciation is used. At the end of the month, the finance does not need to ask the asset manager for a separate Excel summary because they see the same data.

For businesses with a total of tens of thousands to tens of thousands of assets, the real effect of this linkage is thatIt's not the same.The discrepancies accumulated and then processed at year ' s end often take one to two months to make a special accounting and are easily missed.

Accumulation method: All personnel to move vs system guide

How do you do traditional inventory? Print the list of assets, finance, asset managers, use the three-part division to reconcile the account with a list and a number. A medium-sized manufacturing enterprise (about 3,000-5,000 items) takes a single time, involving 5-10 people, usually 3-7 working days.

The dynamic management system changes the logic: it's not people looking for assets, it's a system that starts by telling you "what assets may be problematic." It's based on two-dimensional codes or RFID labels, and hand-held end scans are automatically matched to desk accounts.Unscanted, abnormally conditioned, change of locationAutomatically classified in the list of discrepancies.

Shanghai Zejie Technology Co., Ltd. estimated from several projects in manufacturing and services that identifying exceptions first and then verifying them can cut inventory time to about a third and halve staffing. One midsize logistics company went from five people counting for seven days to two people counting for two days, plus one day for verification.

Depreciation and value tracking: volume accounting vs dynamic basis

The depreciation of fixed assets is charged monthly, the usual method is a straight-line method (i.e. average-year method), the workload method, double-declining balances, sum of years' and so on. Under traditional tables, depreciation is usually run by the finance at the end of the month, and new purchases are made only after the next month if they are not recorded in this month.

The Dynamic Management System embeds depreciation in the asset card: an asset is recorded, the card is depreciated by predefined method, the useful life, and the residual value automatically generates a monthly depreciation plan. The additional assets are charged on the month of the month in which they are recorded, the disposed assets are stopped on the month of the year, and adjustments to entries are generated by the system from the automated production of vouchers for transfer to finance.

For management decisions, depreciation data on this fine particle size means:At any point in time, a single unit of equipment, individual sector, net distribution of assets of a particular class can be pulled outYou don't have to wait for the end of the financial month. You know, you want to see how much net is left of the entire electronics, and you need to ask about finance, and you can sift it in the system.

Risk and anomaly detection: year-end audit vs process early warning

Asset management problems are often not in the asset itself, but in "know it too late." For example, a device worth hundreds of thousands of dollars was transferred to a foreign department for two years, where the original office account was still on file, and where it was registered -- until that year when the inventory was gone.

The value of the dynamic management system here is...Process warning. The system sets out rules: assets above the set number of days without automatic count-scan alerts; registration and actual scanning locations inconsistently trigger verification; net value near residual values are separately marked for disposal; idle assets beyond the set number of months are placed in an early warning pool pending decision to be redeployed.

These rules are not complex in themselves, but they bring about changes in the way of work: problems are marked during the process, rather than being exposed once at year-end audit. For equipment-intensive enterprises (manufacturing, medical, leasing, etc.), it is a matter of time before you can see them.Prevention costs are much lower than ex post costs。

Apply scene and selection judgement

Dynamic management systems are not required for every enterprise. If there are few assets (within dozens of items), the frequency of change (one or two purchases and disposals a year) is low, it is sufficient to share the folder with Excel, without having to put it in "real time connection" alone.

Conversely, the dynamic management system input-output ratio would be more cost-effective if it satisfied either of the following:

The focus of the selection is not on the number of functions, but on the number of functions.Interference with existing financial systemsThe data go-lives are delivered in real time, or the time lot is synchronized? The difference between these two things is whether "connection" is real or not.

A few common pits.

Pipe one: heavy purchasing, light initialization.When the system is bought, the initialization of the asset card is one of the most heavy items in the go-live phase. It takes time to get thousands of assets acquired by their historical date, their original value, accumulated depreciation, a one-time record-up at the repository site, more than the line itself. If they are nuanced, the data in the system will not be allowed from day one, and then the real-time connection after that is a link.

The process runs on paper, not into the system.Some companies go online, transfer orders or sign off-line, asset managers after-action. So the system turns into an "electronic table account" and goes live. To make a connection really effective, it has to be online, online approval, online execution.

Pitfall three: The asset and finance modules operate in silos.If the two systems work independently and are manually exported and imported, then it is actually a switch to another Excel. You can choose an integrated solution or at least get real-time interfaces to deliver, saving you a lot of time for reconciliation.

Back to the beginning: Is it worth it?

The traditional desk accounts are easy to settle with small, less variable assets. But if the asset size is large, it is highly volatile and the financial monthly needs accurate data, the core value of the dynamic management system is two things:One is to synchronize asset data and financial books, the other is to expose anomalies in the process rather than at the end of the year.These two things look simple, and the human resources saved in day-to-day management, time and error costs are often much more significant than the input of the system. Before deciding on the system, think about how to start up the program and how to connect with finance, which is more critical than choosing which brand.