What are the elements of the RFID fixed asset management programme?
What exactly is the RFID fixed asset management program?
A land-deposit RFID fixed asset management program with four pieces: the electronic tags on assets (RFID labels), reading and writing devices and antennas deployed to identify tags at the site, three software platforms (with intermediates and asset management systems) in the backstage, and four associated process systems (coding rules, inventory system, implementation of duty). Hardware is responsible for "recognizing", "cleaning" of the software, "use of the process." All three are set, and RFID is not a flop.
Hardware selection: Matching labels with readers
The label is the entry point for the entire package. The asset is labelled, which directly determines identification distance and field stability.
How do you choose the frequency and the cover?
The most used types of low frequency (LF, about 125 kHz), high frequency (HF, 13.56 MHz), UHF (UHF, 860-960 MHz). The UHF is the most useful -- mass-reading capability -- in a fixed asset inventory view, with dozens to hundreds of labels at a time, and an efficient count. HFs are generally used in situations where close and precise identification is required, such as tool cabinet checks, single-device access to the library, and LFs are less common in fixed asset scenarios.
Covered, metal cabinets, server boxes need to be marked with metal proof (inline suction material or gaskets); if you put it on the surface of office equipment, just plain paper or soft label. Reading the wrong envelope could fall from a 5m projection to less than 1 m, and Shanghai has seen this pit in the project, which is one of the most expensive mistakes for returning work.
Readers and antennas match by scene
The most common configuration we have encountered is: a fixed reader at the entrance, a handheld at the warehouse, a desktop one for the office area, and three combinations of the main event scenes that basically cover the fixed asset.
Software platform: Not as simple as the "management interface"
Many people think that the RFID program is "a read-label button in front of the table" and that there are at least three things to be solved by actually landing on a platform.
Intermediate: conversion of raw data into business events
Readers read a lot of original EPC code numbers and time stampes. The middle is for filtering over-reading, removing wrong data, connecting tags with asset-specific numbers, and pushing structured business events like "Turn Three to bring the notebook number IT-0042 out of B.Simon" into the upper layer. This layer is not working well, and all the useless duplicate data are stacked on the platform.
Asset management system: the core of the accounts
At least include asset files (number, name, user, location, procurement information), library registration, access to transfer, end-of-life disposal, inventory records, and query to measure these modules. The inventory module supports the output of a loss on the disk by region, by sector, by asset class. The statistical module supports a report by usage rate, idle hours, depreciation status, and provides data support for management decisions.
Interface and system interface
The ability to communicate with the enterprise’s ERP, financial systems, and administrative OA is key to the long-term viability of this package.
Process system: RFID cannot replace first-line management
RFID is a tool, not a system. A few things have to be written in the program, or the system runs unsettled and slowly becomes a setup.
Asset code rules
It is proposed to use the level code "Big class + sector + serial number + proofing position" that would provide a first-hand view of asset type and unit of attribution, as well as facilitate the inventory of handhelds by coded area.
Responsible person and inventory cycle
Each user department designates an asset manager, each asset has a clear user or custodian. Without the responsible person, the inventory is unprocessed and data piles are wasted. Periodically, HF assets (bookbooks, instruments, tools) recommend monthly counts; low-frequency assets (office furniture, cabinets) are counted quarterly or semi-annually.
Inventory Method
Fixed-readers make a channeled automatic drive to the strict view of the entrance (the machine room, the endangered store), and handheld machine inspections are suitable for open office areas or large warehouses. We recommend in practice a combination of "Key Access AutoDig + Internal Handheld Periodically" that both ensures efficiency and covers the dead corner, which is often not available in a single way.
Arbitrary mechanisms
Unusual situations such as surplus and loss, unauthorized movements and long-term offline assets require clear processing processes and time frames without which the system alerts many times without follow-up and the full package cannot be kept operational.
Design elements: several experiences to avoid return to work
After several times, the RFID project has been able to sink some common points of attention and pick out a few things that are often overlooked.
The tag paste position must be surveyed on site.
The metal shield, power line interference, and the supersing of adjacent equipment can affect reading. Paste positions require repeated field testing, sometimes adjusting 3-5 times to determine their location.
The tunnel is deployed with a connection.
The entrance is marked with RFID readers, which are linked to door-barrelling, video surveillance and can be traced back.
Data security and permission hierarchy
The RFID tags are for the EPC code and a small amount of basic information, with sensitive asset details in the back-office system. Reader/writing encryption, platform access privileges rating, logprinting, which cannot be saved, and it is very difficult to sort out problems.
Phased implementation
It is suggested to pilot (first on IT equipment or first on a warehouse) an asset in one department or group of assets, run through the process and then expand. All assets are spread out at once, hundreds of thousands of labels go online, systems are prone to disruption when they are not properly fixed, and problems arise that do not distinguish between the asset types.
You want to go to RFID? Ask yourself three questions.
The solution is not as complex as possible. There are only a few dozen to hundreds of items, Excel-based accounts, annual inventory can be completed on time, and the benefits from RFID are limited, and costs are increased by hard.
If the assets are large (over hundreds of items), spread over, time-consuming, and often inconsistent accounts, the RFID program is worth assessing. It's relatively conservative to prioritize moving from high-frequency mobile assets (IT equipment, instruments, tools) to running through processes that extend to low-frequency assets.
Shanghai has repeatedly tested this sequence in several projects: first, to solve "can we identify" and then "can we run well" and finally to consider "can we open up the whole company." The order is negative, and there's a very high probability of returning to work.

Ms. Lei
Mr. Pang