RFID Introduction to Electronic Labelling of Commodities: Workflows, Installation Elements and Common Problems
RFID Knowledge

RFID Introduction to Electronic Labelling of Commodities: Workflows, Installation Elements and Common Problems

PublishedShanghai Zejie Smart Technology Co., Ltd.

The technical rationale and operational specifications of the RFID electronic labels for commodities, which are important marking tools in the age of the Internet, are not complex and mastery of basic processes can help enterprises to move quickly to the ground.

The workflow is divided into three main steps....The step is information writing, the data of the product... encoding, production information, specification parameters, etc. are entered in the label chip, and the initialization of the "electronic ID" is completed. The second step is signal interaction, when the tag enters the magnetic field range of the RFID reader, the chip is activated by sensor currents, and the stored data is sent to the reader via antenna to make non-contact data transfer. The third step is to upload the data, and the reader syncs the information received with the back-office management system, creating dynamic information files for commodities that support real-time queries and tracking.

Three core elements are to be noted when installing. One is location selection, the label should avoid interference sources such as metal components, liquid containers, such as clothing labels that can be placed on the inside of the collar, and electronics labels that are far from battery areas. Two is fixed, using adhesive, hanging or embedded devices based on material, for example glass products suitable for high-temperature glue, fresh products can use waterproof labels and be attached to the outside side of the packaging. Three is environmental adaptation, cold chain commodities need to select low temperature labels, outdoors need to have an antiviolet extra-surface feature label, so as not to cause label failure in extreme environments.

Common problems and solutions are also clear. If the distance of reading is shorter, it can be adjusted to place or change labels because the label is shielded by metal or the antenna is damaged. If information is read wrong, data validation is probably wrong when writing codes. If the label is dropped frequently, high-strength glues or button-fixed goods need to be replaced, especially for high frequency secondary handling.

The mastery of these basic elements will effectively lower the threshold for technology application and allow RFID electronic labels to work in a stable way in such contexts as stockpile management, anti-false traceability etc.