How do we fix the problems identified in the fixed asset inventory? Closed loop process.
RFID Knowledge

How do we fix the problems identified in the fixed asset inventory? Closed loop process.

PublishedShanghai Zejie Smart Technology Co., Ltd.

The most common question after the inventory is whether to "recognize or build" first, or to fix first." The key is not to start with a different path. First, to sort the problem by type, then prioritize it by amount and impact, and finally to go through the five-step closed loop of "Registration and Processing Review and Documentation", which runs out of round run, clears up the stock issues, and stops new problems.

Do you want to make up the bill or build the process?

Many units were filled in to make up the accounts as soon as the inventory was completed, and half of the result was found that the records for approval of asset acquisition and transfer were empty, there was no data source and the next round of business as usual was completed.

The criteria for judging are not complex:

The patchwork and construction process is not a double-check, but a parallel. The patchwork settlement "puts in the books" and the build-up process "doesn't go wrong" is efficient when both lines go together.

How do you classify the questions?

The results of the inventory are in three different ways:

Experience, a medium-sized manufacturing firm took stock of the problem with "office electronics" and concentrated on differences in accounting, "storage tools" on missing processes, "production of heavy equipment" on unclear tenure. The classification is clear, so the fixation scheme is better suited to the problem.

Specific steps for closed-ring treatment

Step one: registration files

All differences are recorded into the re-entry account, and fields include at least: question number, name of asset, department, date of discovery, problem type, current book value, expected processing, liability, projected completion date. This step is intended to "see" the problem, avoid omissions and facilitate follow-up.

Step 2: Classify and assign

The difference is assigned to the finance and asset manager, the missing process category is assigned to internal duties within the department, and the management gap category is assigned to the corresponding business manager. If the amount exceeds $100,000 or involves a dispute over ownership, it must be submitted to the supervisory authority for approval.

Step 3: Resolve the Discrepancy

Financial side: Re-entry cards, depreciation adjustments, elimination of original values, write-off. Process side: Re-signing transfer orders, supplementing access records, revising management systems. Management side: Harmonizing codes, re-labelling, creating desk account holders. This step is the most time-consuming and recommends a weekly progress.

Step 4: Review and confirm

After this process, the inventory team or internal review team will verify on-site, confirm that the physical items are consistent with the accounts and sign. This step cannot be saved, otherwise all the work ahead may be in a formal fashion.

Step 5: Filing and Prevention

All processing records are archived as the next benchmark against which to count. Also, based on this high frequency problem, revise the inventory system or add-on management process. For example, multiple "no transfer is registered", and in OA, the transfer approval is set as a mandatory node, and the process cannot run.

A few pits easy to step on.

Pipe I: The amount and date are changed directly on the original card when the billing is made.This is a high audit risk. The correct approach is to maintain the original records, process the accounts with an adjustment order or additional supporting evidence and clarify the reasons, approving officers and the operator.

Pitfall two: blaming everything on legacy issues.The words "historic legacy" are written in one word, as if all the problems were accounted for and virtually nothing was solved. Even if it is a result of early mismanagement, they will be registered and processed on an individual basis, without any possibility of overloading them.

Third pit: Focus only on the asset itself, ignoring people.Many problems are identified at the root of the inventory. Frequent changes in users, unrecorded cross-sectional borrowing and non-transfer of assets of separating staff will require institutional constraints, otherwise the next round count will remain the same.

The whole thing is fixed and there's no reset.The key to the closed ring is the last. Once the reset has been completed, a back-to-back meeting should be held to measure problem distribution, time processing and type of problems that arise again, using these data as a basis for taking stock of programme optimization in the following year.

Pitch Five: Thinking of the system is good for everything.RFID, a two-dimensional calibration inventory tool can be more efficient, but if the original data is not recorded, then the result is just to sweep things out. The system is a tool, whether basic data are accurate or manual and process-based.

How do you figure the change is really done?

Many units are well-reformed, and the next time you take an inventory, you can ask yourself three questions:

  1. The problem identified in the previous round of inventories, does this wheel ever appear again?
  2. Are the repetition rates below 10 per cent for similar problems?
  3. Has the real compliance rate of assets been above 95 per cent (specific criteria can be adjusted by industry)?

Three questions are answered by yes, which means that the closed circle is really working; if any of them is no, it means that a link has broken and there is a problem in retrospect whether registration, assignment, execution or review.

Shanghai-based Selective Technologies has encountered a typical situation when they do fixed asset inventory consolidation projects: clients spend a lot of effort to finish their accounts, and the next round of inventory shows new problems. Roots are often not counted in themselves, and changes in assets are not recorded in time. It is more efficient to rationalize this part of the process than to repeat them.

The end goal of the re-engineering is not to produce a good report, but to make "the books are on the books and the hearts" and the next count is less and less problematic. This is the right direction, so the rings really turn around.