Internal positioning system based on RFID technology
Industry News

Internal positioning system based on RFID technology

PublishedShanghai Zejie Smart Technology Co., Ltd.
Except for cellular location skills in communication networks, common indoor wireless positioning techniques include Wi-Fi, Bluetooth, infrared, ultrabroadband, and other types of mobile devices.RFIDZigbee and ultrasound, but here we're not going to list it all. We're just talking about the most widely used.RFIDIndoor positioning.
Radio frequency recognition (RFID)RFIDThe RF is an electromagnetic wavelength, which is described as kHz, MHz, GHz, which varies in size from low frequency to microwave.
      RFIDStructure of the interior positioning system:
Usually it consists of electronic labels, radio frequency readers, intermediates and computer databases. Radio frequency tags and readers are exchanged through the transmission channel of the space electromagnetic waves from antenna frames. In positioning systems, the radio frequency readers are placed on a moving object to be detected, and the radio frequency electronic label is embedded into the operating environment. The electronic labels contain information that is identified in a location, and the reader is connected by wire or wirelessly to the database.
UseRFIDPositioning skills for stalking:
In evaluationRFIDBefore it was a strength of the financial stalking skills, there was a need to clarify what was meant by “stalking”.RFIDFrom the very beginning, it was used for some kind of electronic form-based stakeout. It made it easier to identify and record a project near it. If your goal is to make sure that all trains passing through gate A also pass through door B, perhaps to confirm if there are any employees entering the building, then RFID is a well tested and validated processing plan.
In these cases, the government has been working to improve the quality of life.RFIDIt has a clear advantage, which can be read and written from a distance.RFIDThe labels provide valuable sensor information, and on the other hand readers that match the passive tags are not cheap, and semi-inactive labels are very expensive and have limited operational life. A more challenging type of stalking is to learn about the real time position of the objects being targeted. Although this is a relatively new example of RFID, there are many business treatment plans in the market.
These plans work in different ways. Some of them are simple.RFIDThe object identification, using another skill to measure ranges. Those that rely on RFID almost exclusively use active RFID labels. While some of the studies use passive RFID tags, the low-profile size of the non-active labels and their systems make them not commercially available, but also commercially available.RFIDtag-based real-time location system (RTLS) performance compared with competing technologies such as Bluetooth, Bluetooth Low Energy (BLE), Wi-Fi, ultrasound, and ultra-wideband (UWB). RFID primarily uses the LANDMARC system, which determines location by comparing the received signal strength (RSS) of an active tag with that of reference tags at known locations.
      RFIDIt's a much larger recognition than BLE. It can cover up 1 km outdoors compared to 70 meters of BLE. This may not be so important in barrier-free indoor environments (e.g., walls or floors), but it is a source in storage or barns.RFIDThe scale of identification of labels allows businesses to use fewer readers, then lower their own money and reduce potential problems.
      RFIDThere are also shortcomings in the tracking program. It has a loophole, like any plan based on RF/RSSI. Because radio frequency signals can penetrate walls, it is difficult to confirm which room they are from. The high bandwidth used by source-based stakeers (especially long-distance trackers) is very simple and disturbed. And, compared with BLE, labels and readers are valuable in their own right hands.
      RFIDAs part of a whole hybrid system, it has been a great success. It provides solid identification and can be a complementary skill to positioning information systems that rely on ultrasound, infrared or hyperbroadband.