Composition of the radio sublabel selection system
TraditionalTagThe mode of communication for the selection system is generally RS-485 or CAN bus, but because of the complexity of cable wiring, it is extremely difficult to rewire the demolidate movement once the shelf has been wired, and ZigBee wireless communications technology with self-assembled network capability can effectively avoid the wiring problems of cable.
The electronic tag selection system consists of the electronic label (inline ZigBee module), the ZigBee relay, the ZigBee gateway, control of the mainframe, etc., the electronic tag is installed on the shelf, and the system controls the electronic label through a control light, the beeper, display screen, etc., according to the order, the picker's e-labeled signal is correct, quickly, easily completed the replenishment (entry) and removal (exit) tasks.
The electronic labels consist of single-piece machines, display screens, keys, Zigbee modules, signposts, etc.
The display screen is primarily used to display current information about the goods to be retrieved and information about the goods to be retrieved behind; the indicator light is used to indicate pickers; ZigBee is used to receive and send data to update monitor information (small amount) and signal lights; key input end for humans to allow pickers to operate electronic labels.
The ZigBee module of electronic tags typically uses a plate-mounted antenna, with the effect of labeling casings, and 20 db's launch power is difficult to meet, while the warehouse cargo is blocked, which can easily produce a dead corner of communication, adding ZigBee relays in the right place, effectively avoiding an extended communication distance at the back end.
When selecting the goods, there are multiple labels within the same network that simultaneously send a signal to the host, so that in order to avoid being thrown out of the package, ZigBee solids with a load-taped listening back-up mechanism can be used. The module will monitor whether the channel where the data is sent is occupied before it is taken, and if it is taken, re-issuing is avoided, so that the data is not dropped at the same time at multiple nodes.
The electronic tag selection system consists of the electronic label (inline ZigBee module), the ZigBee relay, the ZigBee gateway, control of the mainframe, etc., the electronic tag is installed on the shelf, and the system controls the electronic label through a control light, the beeper, display screen, etc., according to the order, the picker's e-labeled signal is correct, quickly, easily completed the replenishment (entry) and removal (exit) tasks.
The electronic labels consist of single-piece machines, display screens, keys, Zigbee modules, signposts, etc.
The display screen is primarily used to display current information about the goods to be retrieved and information about the goods to be retrieved behind; the indicator light is used to indicate pickers; ZigBee is used to receive and send data to update monitor information (small amount) and signal lights; key input end for humans to allow pickers to operate electronic labels.
The ZigBee module of electronic tags typically uses a plate-mounted antenna, with the effect of labeling casings, and 20 db's launch power is difficult to meet, while the warehouse cargo is blocked, which can easily produce a dead corner of communication, adding ZigBee relays in the right place, effectively avoiding an extended communication distance at the back end.
When selecting the goods, there are multiple labels within the same network that simultaneously send a signal to the host, so that in order to avoid being thrown out of the package, ZigBee solids with a load-taped listening back-up mechanism can be used. The module will monitor whether the channel where the data is sent is occupied before it is taken, and if it is taken, re-issuing is avoided, so that the data is not dropped at the same time at multiple nodes.

Ms. Lei
Mr. Pang