Let's see what the smart card makes.
A smart card consists of three parts: the substrate, the contact surface, and the integrated circuit chip. The substrate is usually PVC, but can also be other plastics or paper. Card manufacturers generally source their PVC from specialist producers rather than making it themselves. Its price varies with whiteness and cleanliness. Under ISO 7816 for contact smart cards, the chip is embedded in the upper-left corner of the card under six or eight contacts that communicate with external equipment. Contact positions and minimum and maximum dimensions are standardized, but card suppliers and chip makers can design the overall contact surface layout.
And the reason why you put the integrated chip at the end is because the integrated chip is a central part of the smart card. During production, the chip will be first sealed into an independent module and then embedded in plastic base, which for non-contact cards also contains a designed antenna. And the embedded card core, called medium, or core, is produced in the pre-production period of the finished card, mainly as a semi-finished product, for all types of smart card and non-smart card production.
SomeSmart cardThis is a smart card that combines RFID and IC technology with non-contact smart cards. Speaking here, we talk about the classification of smart cards. Depending on the interface, smart cards can be classified into contact, non-contact and two-interface cards. Different from non-contact smart cards, contact smart cards need to read and write data only after they have been exposed to reading and writing equipment; whereas the two interface cards (also called composite cards) combine the first two into one card, embed a single chip but allow both contact and non-exposure interfaces.
If we put the smart card in our hands alone, there is no way to operate it, and an independent smart card has no meaning for any application. To use it, access to data from it requires a device that can handle the smart card -- this is the terminal device. Our familiar pos, ATMs, mobile phones can be called terminals, and only through these end-of-pipe devices can we really make the smart card work.
And the reason why you put the integrated chip at the end is because the integrated chip is a central part of the smart card. During production, the chip will be first sealed into an independent module and then embedded in plastic base, which for non-contact cards also contains a designed antenna. And the embedded card core, called medium, or core, is produced in the pre-production period of the finished card, mainly as a semi-finished product, for all types of smart card and non-smart card production.
SomeSmart cardThis is a smart card that combines RFID and IC technology with non-contact smart cards. Speaking here, we talk about the classification of smart cards. Depending on the interface, smart cards can be classified into contact, non-contact and two-interface cards. Different from non-contact smart cards, contact smart cards need to read and write data only after they have been exposed to reading and writing equipment; whereas the two interface cards (also called composite cards) combine the first two into one card, embed a single chip but allow both contact and non-exposure interfaces.
If we put the smart card in our hands alone, there is no way to operate it, and an independent smart card has no meaning for any application. To use it, access to data from it requires a device that can handle the smart card -- this is the terminal device. Our familiar pos, ATMs, mobile phones can be called terminals, and only through these end-of-pipe devices can we really make the smart card work.

Ms. Lei
Mr. Pang