RFID technology in the printing field
RFID goes into the print field and changes not only the functionality of a label, but also the relationship between printing, writing, adhesion and quality review. A label is fully satisfactory in its appearance, but chips may not be written; the chip can read a response that may be inconsistent with the number printed on the surface.
First, do you want to make RFID tags or do you want to print them with RFID?
The first task is to combine RFID embedding with printing, and the following: agility, and matching equal processes; a label or packaging that has wireless recognition capability. The second task is to manage the material and flow of the printed production itself by means of a label in the scrolls, in the swingbox, in the assembly or on the product. The two types of items can exist simultaneously, but the object, the code, is different from the receiving and inspection mode.
If the label is placed on a reusable core or vehicle, it needs to be recorded which material it currently carries. When the core is used again, the original batch cannot be permanently bound to the carrier number. If the label is a product delivered to the client, then the encoded uniqueness of each completed product and the customer-specified rules are verified.
Print number and chip code. Why is one wrong?
In continuous production, surface printing, chip writing and online testing may be at different working places. A stop, scrap, fusion or manual sampling can change the physical order. If the system is based on a "specific" extrapolation, there is a lack of tracking of real locations and removal results, then the label itself is normal, with numbers corresponding to the whole wrong place.
So, you should send the job down, position the object, code the result, surface content and final determination to the same unit. When you find a failure, you need to know if it's going into the waste path, whether the subsequent serial number needs to be re-linked, rather than adding only one failed count on the screen.
At least three quality determinations are distinguished
| Quality dimension | What do you need to know? | There's nothing to replace. |
|---|---|---|
| Printing and Appearance | Text, bar code and surface content are compliant | We can't replace it with a chip response. |
| Wireless reading and writing | Target content can be written and read back under the agreed conditions | You cannot read it back in full with a single discovery label |
| Business coherence | Chips, surface numbers and order objects consistent with and not re-numbered | No single sheet to replace a whole series of uniqueness checks. |
Repeating the code requires particular attention across batches. The absence of a number inside does not mean that it does not conflict with the previous one, re-approval or backup. The rules on numbering and distribution should be managed by a clear mechanism, offline production, and the source of the duplicates and redactions should also be retained.
Back to work and scrap, more test system than normal process
If the same order is reprinted, is it possible that the original failed label will still be used? If the customer returns the finished product, re-inserting the terms of permission and chip. These questions should be agreed before delivery. The original record cannot be deleted to show “full approval” or allow waste to be used in the same identity as the official commodity.
If necessary, you can manage the invalid labels according to a rule that is allowed by your client and keep them scrapped, replacing the relationship with the replacement. Specifically, write in protection or chip operations, which should be based on the selected chip and product description, it is not appropriate to use the same set of default steps for all RFID tags.
Bringing the environment back to the printing phase
The label is delivered with a sticker, the place attached, the packaging and the reading device, which affects the final effect. If the printing press only reads and reads on the desktop by using blank labels, it may miss the customer's box, fill, fold or change after the production process.
It is recommended that samples be identified as containing both visual, coding and scenes, and materials, location, equipment and test conditions are retained. The inclusion of back-track techniques and practical applications in the sample would reduce disputes over “facility at the plant, difficult to use on site”.
The value of RFID in the print field is to bring paper information into the supply chain with digital identities. What's needed is not just a writing device, but a quality chain that can be produced properly, scrapped, back-to-work and deliver continuously explaining identity relationships.

Ms. Lei
Mr. Pang