UWB Indoor Positioning (Reference Design)

Model: Reference Design

Images of UWB indoor positioning programme (reference) products
Plan UWB indoor positioning across rooms, storage aisles, and production areas. Survey coverage, calibrate anchor coordinates, map zones and floors, and test position quality where the system will be used.

Solution Overview

Plan UWB indoor positioning across rooms, storage aisles, and production areas. Survey coverage, calibrate anchor coordinates, map zones and floors, and test position quality where the system will be used.

Coverage planning

Use room dimensions, ceiling height, partitions, and metal structures to plan anchor placement and identify likely non-line-of-sight areas.

Coordinate calibration

Map surveyed anchor coordinates to the actual site and record the calibration method to avoid offset from the floor plan.

Zone maps

Maintain floor, production-area, and functional-zone maps so users can identify the current zone and review transitions.

Quality verification

Test stationary points, moving tags, and obstructions. Record position error, update latency, and gaps in coverage.

Deployment Workflow

  1. Collect floor plans and survey obstructions.
  2. Plan anchor locations, installation, power, and networking.
  3. Calibrate coordinates and load zone maps.
  4. Test static points, moving tags, and boundaries, then adjust the installation.

Storage aisles

Metal racks can affect signal propagation. Test stationary and moving tags in representative aisles.

Multi-zone workshops

Verify zone transitions and track continuity as personnel or assets move between rooms and work areas.

Implementation and Acceptance

Survey ceiling height, wall materials, metal racks, and common routes. Assess RF coverage and position accuracy separately. State the test method and coverage area for each accuracy claim. Use representative rooms and obstructions to validate performance.

This is a reference integration design. Scope, interfaces, deployment size, and performance depend on project requirements. The cover image illustrates an application and does not depict a delivered project.

Specifications

CoveragePlan by floor, room and channel
Put some information on it.Plank, base station location, power supply and network
Mark ContentsBase station coordinates, map scales and coordinates conversion
Validation of StatusStatic points, dynamic paths, blocking and edge areas
Location PresentationFloor, area and object position
Acceptance CriteriaRegional coverage, location deviations and renewal continuity

Product Features

  • Coverage planning: Designing a placement programme that combines room size, layer height, partition and metal facilities to identify potential priority locations for non-visual transmission.
  • Coordinates: Establish a correspondence between the coordinates of the base station and the actual site, record measurements and marking methods and avoid map and position deviation.
  • • Area maps: maintenance of floors, workshops and functional areas, regional attribution of planned location results and cross-district viewing.
  • Quality validation: test methods for static points, motion paths and containment of work situations to record deviations, delays in updating and data interruptions.