Rfid UHF reader ZJ0605-5DBI

Model: ZJ0605-5DBI

Photo of RFID UHF reader ZJ0605-5DBI product
In modern farms, UHF readers are good helpers in livestock management. The staff members use an electronic header for each animal to enter identification, health and so on. On daily inspections, they scan earmarks with a high-frequency reader, quickly mastering the growth of livestock, eating. On sale, they read data, providing complete tracer information, and reassure consumers.

Specifications

◆ The ZJ0605-5DBI UHF RFID reader/writer uses a proprietary design and strictly adheres to EPC Class 1 Gen 2 and ISO 18000-6C, making it suitable for a wide range of RFID tags used worldwide.
• Work frequency is flexible to cover 902-928 MHz and can be tailored to the needs of different countries or regions.
◆ The device supports two working modes of wide-spectral jump frequency (FHSS) and a frequency launch, with output power up to 30 dBm (card transceiver 17dBm), and provides many antenna configuration options such as 5 dbi, 8dbi, 12dbi, which usually ranges from 5 to 30 m.
It is compatible with a variety of working models, such as automatic, interactive responses and triggers, to meet the needs of different applications.
• In power management, low-capacity design is used, with only 12V/2A power required.
• Support for the development of languages such as C# and multiple user interfaces such as RS232, RS485, Wegen 26/34, and for the selection of a TCPIP network interface to ensure efficiency in system integration.
• In practical applications, the effective distance of a reader is affected by antenna type (5DBI, 8 DBI, 12 DBI), UHF electronic label performance and specific work environments.
◆ The ZJ0605-5DBI RFID readers are widely used in a number of fields, including industrial production management at 4.0; museum management; clothing management; tobacco logistics control; food and medicine control; library management systems; identification of car plates; vehicle set-up and movement; smart parking; port vehicle inspection; warehouse material control; baggage package recognition; branding for forgery; and terminal container management; and the construction of an ecological application of a fully functional wireless frequency recognition (RFID) system.

Additional Specifications

Power voltage12V
Operating Frequency902-928MHz
Operating Temperature-20~+65℃
Storage temperature-30~+75℃
Read/Write Range5-10m
Specifications210*210*70mm
ApplicationsIndustrial 4.0 Production Management, Museums, Clothing Management,...

Electrical properties

Limit parameters
Power voltage (VCC): 12V
• Working temperature (TOPR): 20 ~ 65°C
• Storage temperature (TSTR): -30 ~ + 75°C
◆ Work humidity (Rh): +5% ~ +90% No condensation (Cooled)
Specifications
• Power voltage (VCC): 9-24V (12V typical)
• Work current (IC): 1.5A
• Frequency of work (FREQ): 902-928 MHz

Wire interface

• Power (red), CND (black), 232 TXD (white), 232 RXD (purified), GND (brown), Wegen DATA0 (yellow)
• Wegen DATA1 (Deep Green), CND (Gray), 485 A+ (Photray), 485 B- (Orange), Trigger T+ (Slight Green), Trigger T-(Blue)
◆ Note: For the configuration of the TCPIP network interface, a standard RJ45 web plugin is attached; relays, bluetooth, WiFi can be customised.

Other parameters

• Specification size: 210*210*70mm
• Product weight: 1.50 kg
• Reading and writing distance: 5-10 m
• Protection standard: IP-65
◆ Power supply: DC12V, 25W adapter (conversion from AC220, 50Hz)
• Trigger interface: 1 input port
◆ Read-write mode: single card (label) mode, speed of reading and writing < 0.1 seconds
Label rate: 100 km/h
• Directional reading card area: An antenna orientation map with reference configuration
• There may be differences in the parameters and functions of this card reader between home or area standards and under different circumstances, without further notice

Product Presentation

Product Photos
RFid UHF reader ZJ0605-5DBI live presentation

RFid UHF reader ZJ0605-5DBI live presentation figure II