UHF reader module for rfid

Image of UHF-reader module product from rfid
In the smart home-based research lab, engineers are conducting stress-tips around rfid hyperhigh frequency (UHF) readers modules. To get the smart door lock to identify users precisely, they embed rfid ultra-high frequency (UHF) readers in a lock core and repeat test matching. Smart home-to-wire is also used to use rfid hyperhigh frequency (UHF) readers to achieve rapid inter-equipment communication. Once again, it is used to improve the recognition of the security system.

Product Overview

◆ Proprietary design with full support for EPC C1G2 (ISO18000-6C).
• Work frequency 840-960 MHz (which can be adjusted to the requirements of different countries or regions) and work by wide-spectral frequency (FHSS) or ad hoc frequency (RFSS) launch;
◆ Output power is adjustable in software in 1 dB steps, up to 30 dBm. Antenna options include 5 dBi, 9 dBi, and 12 dBi. Typical read range: 8–35 m.
• Peak label query speed > 700/s, tag cache 1000 tags @96bit EPC;
◆ MMCX antenna interface, low-utility design, wide working voltage, single +3.7V~5V power supply;
• Support for RS232 serial communication interface (3.3 V TTL level), high stability, external dispersive air cooling and spreading heat;
• Supporting the development of C#, C++ and Delphi languages;
• Identification of the UF non-active temperature label (ZJ-301T module);
• There may be differences in the parameters and functions of this reading and writing module in different national or regional standards and environments;
◆ The standard application is for industrial production management at 4.0; museums; clothing management; tobacco logistics; food and medicine management; book management; security of licence plates; vehicle set-up control; smart parking management; port-entry/exit vehicle inspection control; warehouse material access control and identification control; baggage package recognition management; brand-based commodity fraud prevention; and various areas of use of wireless frequency recognition (RFID) systems, such as terminal container management.

Electrical properties

Limit parameters
Power voltage (VCC): 5.5 V
• Working temperature (TOPR): 20 ~ 65°C
• Storage temperature (TSTR): 30 + 75 °C
◆ Work humidity (Rh): +5% ~ +90% No condensation (Cooled)
Specifications
· Power voltage (VCC): 3.7-5.25 V (5V typical)
• Work current (IC): 1500 mA
• Frequency of work (FREQ): 860-960 MHz
Radiofrequency output power (PRF): 0-33dBm
◆ Radio-frequency output power accuracy (APRF): +/-1dB
◆ Radio-frequency output power flat (FRPF): +/-0.2 dB
• Receiving sensitivity (SR): -85dBm

Wire interface

• Power (red), CND (black), 232 TXD (white), 232 RXD (purified), GND (brown), Wegen DATA0 (yellow)
• Wegen DATA1 (Deep Green), CND (Gray), 485 A+ (Photray), 485 B- (Orange), Trigger T+ (Slight Green), Trigger T-(Blue)
◆ Note: For the configuration of the TCPIP network interface, a standard RJ45 web plugin is attached; relays, bluetooth, WiFi can be customised.

Other parameters

• Reading and writing distance: 25-35 m
• Protection standard: IP-65
◆ Power supply: DC12V, 25W adapter (conversion from AC220, 50Hz)
• Trigger interface: 1 input port
◆ Reading and writing mode: Doca (label) mode, speed of reading and writing < 0.1 seconds
Label rate: 100 km/h
• Directional reading card area: An antenna orientation map with reference configuration
Communications interface 1: RS232, RS485
◆ Communication interface 2: relay and RJ45 Ethernet output (optional TCP/IP; Wi-Fi and other options available on request)
• Work power: DC12V/2A adapter (AC220, 50Hz conversion)

Product Presentation

Product Photos
Presentation of UHF-readers module products for rfid

Figure 2 display of UHF-rewriter module products in rfid

Specifications

Power voltage5.5V
Operating Frequency860-960MHz
Operating Temperature-20~+65℃
Storage temperature-30~+75℃
Read/Write Range25-35m
Protective standardsIP-65
ApplicationsIndustrial 4.0 Production Management, Museums, Clothing Management, Smoke...