ZJF202-8A Eight-Port Fixed UHF RFID Reader

Model: ZJF202-8A

ZJF202-8A eight-port UHF reader with external antennas, product photo
An eight-port fixed UHF RFID reader with antenna polling for multi-position warehouse and production installations.

Product Overview

◆ The ZJF202-8A is a high-performance 8-channel UHF RFID reader/writer with external antennas. It uses proprietary core technology and an efficient proprietary signal-processing algorithm.
• The device is capable of completing the reading and writing of electronic labels quickly, with a high degree of literacy;
It can therefore be applied in a wide range of areas, not only logistics management, door-to-door systems, forgery protection certification, but also production process control, which fully meets the needs of various wireless frequency identification (RFID) systems.

Product Features

◆ Impinj R2000 for radio frequency core chip
High Performance Multiple Label Identification Algorithm
◆ A few label optimization algorithms
• Double CPU architecture design
• Rapid 8 antennas for inquiry
• Hardware dead-end monitoring
◆ Radio-frequency power amplifier PA protection
Zoom PA high power output
Antenna connection detection
• Simple and efficient software and hardware interfaces
• Board temperature sensors
◆ Outstanding label reading performance
A simple and efficient command system.
♪ A brilliant heat-dissemination design ♪

Specifications

• Model: ZJF202-8A
◆ Type: Eight-channel UHF RFID reader/writer with external antennas
• Outer dimensions: 240(L) x 204(W) x 30mm(H)
◆ Weight: 925g
• Shell material: aluminium
• Input voltage: DC12V-24V
• Stand-by current: <70mA
• Sleep status current: <100uA
◆ Work current: 800mA +/- 5% @DC 12V Input (33dBm output power average working current)
Working temperature: -30°C ~+70°C
• Storage temperature: -40 °C ~ + 85 °C
◆ Work humidity: < 95% (+ 25°C)
Air interface protocol: MEPC global UHF Class 1 Gen 2 / ISO 18000-6C
• Work spectrum range: 860 MHz ~ 960 MHz
◆ Output power: 0 ~ 33dBm
◆ Output power accuracy: +/- 1dB
◆ Output power flat: +/- 0.25 dB
• Receiving sensitivity: < -85dBm
• Inventory label peak speed: 700 per second
◆ Tag RSSI: supported
Antenna connection protection: support
• Environmental temperature monitoring: support
• Working model: single/intensive
Communications interface: RS232 or TCP/IP
GPIO: 2-way input, 2-way output
• Communication Porter Rate: Default 115200bps (configurable 38,400 or 460800)
◆ Thermal dispersion: air cooling
• Workspace support: US, Canada and other offices following U.S. FCC; Europe and other missions following EDSI EN 302 208 with & without LBT contributions; Mainland China; Japan; Korea; Malaysia; Taiwan
◆ Note: There may be differences in the parameters and functions of this card issuer in different national or regional standards and circumstances, without further notice

Additional Specifications

Power voltageDC12V~24V
Operating Frequency860MHz ~960MHz
Operating Temperature- 30°C ~+70°C
Storage temperature- 40 °C~+ 85°C
Communications interfaceRS232 or TCP/IP
Product size240(L) x 204(W) x 30mm(H)

Product Photos

ZJF202-8A eight-channel UHF reader/writer with external antennas, diagram 1

ZJF202-8A 8-channel UHF reader with external antennas, diagram 2

ZJF202-8A eight-port UHF reader with external antennas, diagram 3

ZJF202-8A eight-channel UHF reader/writer with external antennas, diagram 4