How do you fill out the asset inventory?
RFID Knowledge

How do you fill out the asset inventory?

PublishedShanghai Zejie Smart Technology Co., Ltd.

How the asset inventory form is completed is critical to enable each asset to be identified, located and reconciled. Name, number, location, user department, responsible person, quantity and status by asset class; then cross-reference physical with bookkeeping, identify discrepancies and disposal observations, and file them after review.

What are the usual elements to be filled in for an asset inventory?

Common fields include asset numbers, asset names, specifications, models, units of measure, book quantities, physical quantities, place of deposit, department of use, custodian, asset status, description of differences and date of inventory. If a form is used for the verification of fixed assets, it also contains the date of purchase, original value, accumulated depreciation and net book value; this information should be based on existing asset desks or financial records, not to be filled in memory.

The “actual disk” is the actual inventory on site; the “assets status” can be filled in as it should be, idle, repaired, scrapped or not found. For assets managed by a single piece of computer, equipment, etc., the numbering shall correspond to the asset label as far as possible; for low-value, expendable or bulk items, a summary may be made by category, specification and location of the storage, and a statistical calibration will be indicated in the notes.

What is the process of filling out the asset inventory form?

It is possible to proceed by "Specify scope - Collate Base Sheets - On-site Checking - Record Differences - Review Archive." First, it is clear what the date, location and range of assets are, then basic information is exported from the billboard; physical objects are searched on the basis of a number or name, verified quantity, location, user and state at the site; individual records are recorded when discrepancies are found, reasons for discrepancies are indicated, verification basis and subsequent processors are checked, avoiding direct re-engineering of original book data.

When Shanghai Select Technologies, when combing the asset inventory filing method, it usually separates “book-based” and “on-site verification” information from “on-site” information to facilitate review to see what is the original record and which are the results of the count. After completion of the filer, the reviewers will check the number, quantity and discrepancy statement; if transfers are involved, the end-of-life or change in the person responsible will be processed in accordance with the internal approval process and the official billing will be updated.

Which errors were most common when completing the asset inventory?

Common problems include missing or duplicated asset numbers, inconsistent names and modeling, direct copying of the book number into a physical disk, only unspecified location in the repository area, and empty space when assets are not found. The original record should be kept on file, and the uncertain information label “to be verified” should be recorded as the checker and date; do not write as processed or scrapped when the cause of the difference has not been confirmed.

The value of the inventory is not only to count, but also to allow follow-up to trace differences, confirm responsibilities and update the desk accordingly.