How did our I.C. card work?
In our daily lives, we can see a variety of IC cards everywhere, such as the door-barriers that we use in our neighborhood, our second-generation IDs, like our bus cards, media cards, credit cards, bank cards, etc., so let's hear how the IC card is made today!
First, IC cards are in the pre-production phase and need to be designed for images printed on them, which are made in CDR, AI or SD format, and then we usually produce Philin and print it by phillin, or directly by CTP, and then printing it on the press, and then printing it on both sides, and if it's an exposure IC card, we need to put the card back and back into one layer, then flush it into a small card, then wash the slot, then put the contact chip in the tank, then we can check the post-chip OK, then we can test, and then we can package it. For the sensor IC card, you need to pre-pack the chip and wire in the medium, then you have to put it together with printed material on the back and back, and then you can go up to the bed-scratch and then you can type, test, package, like with a special process, and we'll make it into a product.
After learning about our process, I believe you have a preliminary idea of the card and that the young editor would like to take this opportunity to get his client friends who are in such a hurry to ask for it every time they come in, to know how we make the cards and control their own order!
First, IC cards are in the pre-production phase and need to be designed for images printed on them, which are made in CDR, AI or SD format, and then we usually produce Philin and print it by phillin, or directly by CTP, and then printing it on the press, and then printing it on both sides, and if it's an exposure IC card, we need to put the card back and back into one layer, then flush it into a small card, then wash the slot, then put the contact chip in the tank, then we can check the post-chip OK, then we can test, and then we can package it. For the sensor IC card, you need to pre-pack the chip and wire in the medium, then you have to put it together with printed material on the back and back, and then you can go up to the bed-scratch and then you can type, test, package, like with a special process, and we'll make it into a product.
After learning about our process, I believe you have a preliminary idea of the card and that the young editor would like to take this opportunity to get his client friends who are in such a hurry to ask for it every time they come in, to know how we make the cards and control their own order!

Ms. Lei
Mr. Pang