How does the RFID fixed asset management system price be affected?
RFID Knowledge

How does the RFID fixed asset management system price be affected?

PublishedShanghai Zejie Smart Technology Co., Ltd.

Last winter, a customer warehouse inventory of electronic components was taken up in thousands of containers on the shelf, two stockers checked each of them with a form, and two rows passed by one afternoon, with many errors. The store manager stood there and lashed out, saying that the vault was so stung every year. They changed the RFID fixed asset management system, the same amount of stock, two people plus a handheld terminal, and then finished it for two days.

How much does this set cost? There's no standard answer in the industry. The core difference in the offer usually falls in five places: hardware purchases, software functions, deployment size, asset environment, and how to connect with existing systems.

Hardware takes over, labels and typewriters choose basic input

The RFID fixed asset management system has three main components: electronic tags on assets, a reader attached to the exit or entry or shelf and handheld terminals used for inventory counts.

The labels are both passive (passive) and active (active). The passive labels are powered by readers, at a cheap price, each from a few cents to a few dollars, for most office equipment and ordinary assets. The source tags have a self-carrying battery, which can read distance from several millimetres to hundreds of metres, with a single price usually between several dozen and a few hundred dollars, mainly on large equipment, vehicles or off-site assets. If there is an office computer in the asset scene and a heavy machine bed, both labels are available, and only the label purchases tend to account for nearly half of hardware input.

Reader prices vary widely. Small desktop readers cost a few hundred yuan each. Fixed industrial readers range from a few thousand to more than CNY 10,000. A portal reader system, the kind that identifies an entire carton at a warehouse entrance, typically costs several tens of thousands of yuan. Handheld terminals range from CNY 2,000 to over CNY 10,000. Rugged models resistant to drops, water, and dust suit workshops and outdoor use. They cost more but are more durable.

The software is different in depth. The offer is multiple times different.

The software in the RFID fixed asset management system is rarely available and is mostly customized to the enterprise ' s inventory rules, approval process, and report formats.

Basic functions include asset inventory, access, return, inventory, and end-of-life, which are modules that all systems will have. The step-wise function opens the gap: Auto-depreciation (by year or workload method), automated production of vouchers with financial systems, asset maintenance history backtracking, transfer approval process across warehouses, multi-tier authority management. Each functional development involves human resources, the more complex it is, the longer it takes, the higher the price. A system that only makes a base count and a system that covers full life cycle management, the difference can be multiplied.

There is also a cost that is often overlooked: the way systems are deployed. Localization requires the procurement of servers and databases, with high initial input but autonomous data; SaaS (software, i.e. services, which are paid annually, servers are hosted by service providers) model cheaply in advance, and on an annual basis, long-term rental may be more expensive than one-time buyout, but it is more friendly for SMEs.

The bigger the deployment, the easier it gets to get down.

Tags and readers are both bought in bulk, so volume makes a big difference. A small company with 200 computers may pay over one yuan per tag. An enterprise with tens of thousands of devices could negotiate the same tag down to a few tenths of a yuan. It is the same for readers and handhelds: distributor pricing can differ by more than 20% between orders of 10 and 100 units.

The same logic applies to software costs. The underlying framework is built once and reused, so the more assets it covers, the lower the software cost per asset. One warehouse operator with a limited initial budget put RFID tags on only its 500 most critical forklifts and pallets and gradually expanded to other assets once the system was working smoothly. This is a common approach and a practical way to control upfront costs.

The physical environment in which the asset is located will allow the cost to rise.

The RFID spreads smoothly in the air, but when it comes to metals and liquids, it is disturbed or absorbed. The metal shelf that is common in warehouses, the metal equipment shell, the liquid container, can significantly reduce the distance of reading, even if not read.

The solution is to use a metal-resistant label, which has a special mass inside it that can "stop" the reflection wave of the metal's surface, at several times the price of an ordinary non-active label. If the asset itself is a stainless steel or aluminium alloy device, anti-metallic labels are just needed, and there is no alternative.

Outdoor assets such as containers, engineering vehicles, outdoor pipe management, the need for more protected industrial labels and readers, and the need to consider thunderstorms, heavy rains, low temperatures, etc. Hardware costs are much higher than indoors. A southern customer who runs port equipment has deployed similar programs, with all outdoor readers having mine-proof modules and water-protective casings, which alone is nearly twice as expensive as an indoor programme.

The interface with existing systems hides hidden costs that can easily be omitted.

Many enterprises already have ERP (enterprise resource planning systems, core software for procurement, inventory, finance, finance or OA), and RFID systems need to access data and avoid duplication of entry.

There are two types of docking: the API interface (the data is retrieved from one system to another through a pre-agreed "channel"), the short development cycle, and the relatively manageable cost; the other is the deep interconnection at the database level, which requires combing the two sides, mapping rules, data cleansing, long working periods, and much higher costs.

The more interfaces are available, the more third-party systems are connected, the more this part of the price is put in the price. Some clients fail to budget the cost of docking early, and when the project reaches half, it takes one more, which is recommended for early warning at the project evaluation. Shanghai-based Sieux Tech usually offers a standard and customized price for each demand, so that the total budget can be seen.

If you want a fair offer, think about it first.

First, we take a clear inventory of the total number and type of assets, and then we list the equipment that needs to be managed, and estimate the use of labels and readers. Second, we comb through the existing system, see what data needs to be broken down and what can be put in first. Third, we list core functions, separate "must" from "aside," give priority to running the basic count process, then consider depreciation, and maintain the grade modules of the history.

And to think about all three things, it's a lot less of communication costs, and the price is much more in line with the actual budget. The RFID fixed asset management system is not a one-time consumption, there's label losses at a later stage, there's the maintenance of readers, the system upgrades these ongoing inputs, the speed of service response and localization support capabilities are included in the selection of suppliers, and it will be more economical to use them over time.