RFID Tray tags work in detail: How to achieve rapid identification of bulk cargo?
The RFID Tray Tags achieve rapid identification of bulk cargo through wireless radio frequency technology, and significantly increase the efficiency of warehousing and logistics. The core principle is to use UHF signals to interact with readers and read multiple labels at the same time without having to scan them manually. This paper details the workflow, technical advantages (e.g. anti-disturbation, remote recognition) of the RFID Tray Labels, and how to optimize their deployment to achieve a second-scale count.
In intelligent warehousing and logistics management, RFID tray tags have become the key technology for replacing traditional bar codes that achieve no-go, mass scans, operational efficiency. So how does it work? And how does it help businesses to identify second-level goods?
The core of the RFID tray tag is a chip+ antenna, which activates and returns data by receiving UHF (usually 860-960 MHz) from a reader. Unlike barcodes, the RFID label does not need to be scanned or identified as long as it is within the scope of the reader (up to 15 metres). Key processes include: reading writer launching an radio frequency signal; receiving energy from the label antenna and activation of the chip; sending back information on stored goods (e.g. ID, batch number) back to the reader; and synchronizing data in the back desk to achieve real-time inventory management.
A key benefit of RFID pallet tags is reading hundreds per second using multitag anti-collision and bulk reading. The anti-collision protocol uses time-division multiple access (TDMA) so tags respond at different times and signals do not collide. A UHF reader can scan all tags on a pallet, for example 50–200, in one pass instead of individually.
Compared to the traditional bar code, RFID tray labels have advantages in terms of the speed of the count, resistance to interference and data capacity. Traditional barcodes require 1-2 seconds/labels and are manually calibrated, while RFID can achieve 100+ label/second automatic mass reading; barcodes are susceptible to pollution, mask effects, RFID is oil-resistant, dusty, able to penetrate non-metal packaging; barcodes only store ID backstage queries, RFID can store weight, temperature etc. extension information.
To optimize deployment, it is recommended that: Select a metal-resistant label (for metal trays) or a high temperature-resisting label (cold chain scene); install fixed/mobile readers on forklift arms at warehouse entrances to achieve full process tracking; and interface with WMS (storage management system), auto-update inventory data.
Future trends include: training AI on inventory requirements through RFID data in conjunction with AI; and the non-source network, where RFID labels (such as Ambient Power) that do not require batteries will further reduce costs.
The RFID Tray label addresses the efficiency bottlenecks of traditional warehousing by means of wireless group reading. Enterprises can only deploy hardware once, and get zero error over time, and manage it efficiently. If you need to implement a program or product selection proposal, you can communicate more.

Ms. Lei
Mr. Pang